main
Ray
Publish 0.1.0
650d51b
EEE-FTH101XAP
Panasonic Industry · Capacitors · Radial, Can - SMD
EEE-FTH101XAP from Panasonic Industry, in a Radial, Can - SMD. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | + | passive | Positive (anode) terminal of the 100 µF ±20 % capacitor, rated 50 V DC, which must not exceed the rated voltage or see reverse voltage. |
| 2 | - | passive | Negative (cathode) terminal, identified by the negative polarity marking (-) on the case top, and the case must be isolated from this terminal and the circuit pattern. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Panasonic Industry |
| Package | Radial, Can - SMD |
| Category | Capacitors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rated voltage | 50 | V | Rated voltage code H (50 V) for this MPN | 4 | |||
| Nominal capacitance | C | 100 | µF | Capacitance code 101 (100 µF) | 3 | ||
| Capacitance tolerance | -20 | 20 | % | 120 Hz / +20 °C | 1 | ||
| Dissipation factor (tan δ) | tan δ | 0.1 | 120 Hz / +20 °C | 4 | |||
| Equivalent series resistance (ESR) | ESR | 0.68 | Ω | 100 kHz / +20 °C | 4 | ||
| Ripple current | 900 | mA rms | 100 kHz / +105 °C | 4 | |||
| Leakage current | I | 0.01 | µA | I ≤ 0.01 CV (µA), after 2 minutes | 1 | ||
| Category temperature range | T | -55 | 105 | °C | Category temp. range | 1 | |
| Capacitance change after endurance | ΔC/C | -30 | 30 | % | After applying rated working voltage for 2000 hours at +105 °C ± 2 °C, then stabilized at +20 °C | 1 | |
| Dissipation factor change after endurance | tan δ | 200 | % of initial limit | After applying rated working voltage for 2000 hours at +105 °C ± 2 °C, then stabilized at +20 °C | 1 | ||
| Capacitance change after resistance to soldering heat | ΔC/C | -10 | 10 | % | After reflow soldering and then stabilized at +20 °C | 1 |
CAD (Adom-generated)
- Symbol:
EEE-FTH101XAP - Footprint:
Adom_Gen:Panasonic_Industry_EEE-FTH1_1d884c - 3D model: generated to fit the land (STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Panasonic Industry datasheet (11 pp, sha256
affbdbc3402d5d78, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
# EEE-FTH101XAP
**Panasonic Industry** · Capacitors · Radial, Can - SMD
EEE-FTH101XAP from Panasonic Industry, in a Radial, Can - SMD. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | + | passive | Positive (anode) terminal of the 100 µF ±20 % capacitor, rated 50 V DC, which must not exceed the rated voltage or see reverse voltage. |
| 2 | - | passive | Negative (cathode) terminal, identified by the negative polarity marking (-) on the case top, and the case must be isolated from this terminal and the circuit pattern. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Panasonic Industry |
| Package | Radial, Can - SMD |
| Category | Capacitors |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rated voltage | | | 50 | | V | Rated voltage code H (50 V) for this MPN | 4 |
| Nominal capacitance | C | | 100 | | µF | Capacitance code 101 (100 µF) | 3 |
| Capacitance tolerance | | -20 | | 20 | % | 120 Hz / +20 °C | 1 |
| Dissipation factor (tan δ) | tan δ | | | 0.1 | | 120 Hz / +20 °C | 4 |
| Equivalent series resistance (ESR) | ESR | | | 0.68 | Ω | 100 kHz / +20 °C | 4 |
| Ripple current | | | 900 | | mA rms | 100 kHz / +105 °C | 4 |
| Leakage current | I | | | 0.01 | µA | I ≤ 0.01 CV (µA), after 2 minutes | 1 |
| Category temperature range | T | -55 | | 105 | °C | Category temp. range | 1 |
| Capacitance change after endurance | ΔC/C | -30 | | 30 | % | After applying rated working voltage for 2000 hours at +105 °C ± 2 °C, then stabilized at +20 °C | 1 |
| Dissipation factor change after endurance | tan δ | | | 200 | % of initial limit | After applying rated working voltage for 2000 hours at +105 °C ± 2 °C, then stabilized at +20 °C | 1 |
| Capacitance change after resistance to soldering heat | ΔC/C | -10 | | 10 | % | After reflow soldering and then stabilized at +20 °C | 1 |
## CAD (Adom-generated)
- Symbol: `EEE-FTH101XAP`
- Footprint: `Adom_Gen:Panasonic_Industry_EEE-FTH1_1d884c`
- 3D model: generated to fit the land (STEP)
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Panasonic Industry datasheet](https://industrial.panasonic.com/cdbs/www-data/pdf/RDE0000/ABA0000C1240.pdf) (11 pp, sha256 `affbdbc3402d5d78`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
[Datasheet PDF](docs/eee-fth101xap-datasheet.pdf)