component

EA2208LT6R

Public Made by Adom

by adom

Everanalog IC design DC-DC Converters, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentpmicea2208lt6r
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ea2208lt6r: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
ea2208lt6r-etched.fit.json ea2208lt6r: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ea2208lt6r-etched.glb ea2208lt6r: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ea2208lt6r-etched.step ea2208lt6r: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ea2208lt6r.glb Publish 0.1.0 · Ray
ea2208lt6r.kicad_mod Publish 0.1.0 · Ray
ea2208lt6r.kicad_sym Publish 0.1.0 · Ray
ea2208lt6r.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
ea2208lt6r.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json ea2208lt6r: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md ea2208lt6r: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

EA2208LT6R

Everanalog IC design · DC-DC Converters · SOT-23-6

EA2208LT6R from Everanalog IC design, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SWITCH output Internal NMOS power switch drain output. Connect to the boost inductor and the anode of the output Schottky rectifier. Abs-max voltage +22V; internal current limit 2.5A (adjustable via OC); RDS(on) ~80mΩ typ.
2 GND power_in Device ground. Should be tied to a large ground plane and connected close to the input/output capacitor return paths to minimize noise.
3 FBK input Feedback input to the internal error amplifier; regulated to VREF = 0.6V (typ, 0.588-0.612V). Set output voltage with a resistor divider from VOUT to FBK to GND: VOUT = 0.6 x (R1/R2) + 0.6 V. Abs-max +6V; input bias ~-10nA.
4 RUN input Enable / on-off control input. Drive high (>=1.5V) to enable the converter, low (<=0.5V) to shut down (ISD ~0.1uA). Must not be left floating. Abs-max +18V.
5 PWR power_in Device power input supply, 2.2V to 16V (abs-max +18V). Decouple with a 22uF X5R/X7R MLCC placed as close to the pin as possible to avoid noise interference.
6 OC input Adjustable peak-switch current-limit programming pin. Connect a 19kΩ-96kΩ resistor (R3) from OC to GND to set IOC from 2.5A down to 0.5A (IOC = 48000 / R3). May be left floating, in which case the internal 2.5A current limit is used. Keep the trace short.

Key specifications

Parameter Value
Manufacturer Everanalog IC design
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • EA2208LT6R

CAD (KiCad official)

  • Symbol: EA2208LT6R
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: ea2208lt6r-etched.step / ea2208lt6r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ea2208lt6r.step / ea2208lt6r.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
ea2208lt6r.step 97 KB You want the bare part, or you mark your own boards.
ea2208lt6r-etched.step 2.0 MB You want the part with EA2208LT6R already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 498 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Everanalog IC design datasheet (8 pp, sha256 ccd9c1e971e6ab43, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF