main
Ray
Publish 0.1.0
7d85d87
E22-900M22S
**** · LoRa Modules · SMD, 20x14mm
E22-900M22S from , in a SMD, 20x14mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground wire, connected to the power reference ground. |
| 2 | GND | power_in | Ground wire, connected to the power reference ground. |
| 3 | GND | power_in | Ground wire, connected to the power reference ground. |
| 4 | GND | power_in | Ground wire, connected to the power reference ground. |
| 5 | GND | power_in | Ground wire, connected to the power reference ground. |
| 6 | RXEN | input | RF switch receiving control pin, connected to external microcontroller IO, valid in high level. |
| 7 | TXEN | input | RF switch transmitting control pin, connected to external microcontroller IO or DIO2, valid in high level. |
| 8 | DIO2 | bidirectional | Configurable universal IO port, see SX1262 manual for details. |
| 9 | VCC | power_in | Power supply, 1.8~3.7V, and it is recommended to add an external ceramic filter capacitor. |
| 10 | GND | power_in | Ground wire, connected to the power reference ground. |
| 11 | GND | power_in | Ground wire, connected to the power reference ground. |
| 12 | GND | power_in | Ground wire, connected to the power reference ground. |
| 13 | DIO1 | bidirectional | Configurable universal IO port, see SX1262 manual for details. |
| 14 | BUSY | output | For status indication, see SX1262 manual for details. |
| 15 | NRST | input | Chip reset trigger input pin, valid in low level. |
| 16 | MISO | output | SPI data output pin. |
| 17 | MOSI | input | SPI data output pin as printed in the function column, though the direction column lists Input. |
| 18 | SCK | input | SPI data output pin as printed in the function column, though the direction column lists Input. |
| 19 | NSS | input | Module chip select pin for starting an SPI communication. |
| 20 | GND | power_in | Ground wire, connected to the power reference ground. |
| 21 | ANT | passive | Antenna interface, stamp hole with 50 ohm characteristic impedance. |
| 22 | GND | power_in | Ground wire, connected to the power reference ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | |
| Package | SMD, 20x14mm |
| Category | IoT/Communication Modules |
| Pins | 22 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply | 0 | 3.7 | V | Voltage over 3.7V will cause permanent damage to module | 4 | ||
| Blocking power | -10 | dBm | Chances of burn is slim when modules are used in short distance | 4 | |||
| Operating temperature | -40 | 85 | °C | 4 | |||
| Operating voltage | 1.8 | 3.3 | 3.7 | V | 4 | ||
| Operating temperature | -40 | 85 | °C | Industrial design | 4 | ||
| Operating frequency | 850 | 930 | GHz | Support ISM band | 4 | ||
| Max Tx power | 21.4 | 21.5 | 22.3 | dBm | 4 | ||
| Receiving sensitivity | -144 | -146 | -147 | dBm | Air data rate is 0.3kbps | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | spread on the Top Layer of the module contact part(All copper-covered and well grounded), and must be close to | 8 |
CAD (Adom-generated)
- Symbol:
E22-900M22S - Footprint:
Adom_Gen:Chengdu_Ebyte_Elec_Tech_E22_76a870 - 3D model: generated to fit the land (STEP)
- 3D model files:
e22-900m22s-etched.step/e22-900m22s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);e22-900m22s.step/e22-900m22s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: datasheet (12 pp, sha256
7106fd06fc3089ab, retrieved 2026-11-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Ebyte gives module pad only; lands 1.6x0.8, 0.7 past the module edge, review #2688
# E22-900M22S
**** · LoRa Modules · SMD, 20x14mm
E22-900M22S from , in a SMD, 20x14mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground wire, connected to the power reference ground. |
| 2 | GND | power_in | Ground wire, connected to the power reference ground. |
| 3 | GND | power_in | Ground wire, connected to the power reference ground. |
| 4 | GND | power_in | Ground wire, connected to the power reference ground. |
| 5 | GND | power_in | Ground wire, connected to the power reference ground. |
| 6 | RXEN | input | RF switch receiving control pin, connected to external microcontroller IO, valid in high level. |
| 7 | TXEN | input | RF switch transmitting control pin, connected to external microcontroller IO or DIO2, valid in high level. |
| 8 | DIO2 | bidirectional | Configurable universal IO port, see SX1262 manual for details. |
| 9 | VCC | power_in | Power supply, 1.8~3.7V, and it is recommended to add an external ceramic filter capacitor. |
| 10 | GND | power_in | Ground wire, connected to the power reference ground. |
| 11 | GND | power_in | Ground wire, connected to the power reference ground. |
| 12 | GND | power_in | Ground wire, connected to the power reference ground. |
| 13 | DIO1 | bidirectional | Configurable universal IO port, see SX1262 manual for details. |
| 14 | BUSY | output | For status indication, see SX1262 manual for details. |
| 15 | NRST | input | Chip reset trigger input pin, valid in low level. |
| 16 | MISO | output | SPI data output pin. |
| 17 | MOSI | input | SPI data output pin as printed in the function column, though the direction column lists Input. |
| 18 | SCK | input | SPI data output pin as printed in the function column, though the direction column lists Input. |
| 19 | NSS | input | Module chip select pin for starting an SPI communication. |
| 20 | GND | power_in | Ground wire, connected to the power reference ground. |
| 21 | ANT | passive | Antenna interface, stamp hole with 50 ohm characteristic impedance. |
| 22 | GND | power_in | Ground wire, connected to the power reference ground. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | |
| Package | SMD, 20x14mm |
| Category | IoT/Communication Modules |
| Pins | 22 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply | | 0 | | 3.7 | V | Voltage over 3.7V will cause permanent damage to module | 4 |
| Blocking power | | | | -10 | dBm | Chances of burn is slim when modules are used in short distance | 4 |
| Operating temperature | | -40 | | 85 | °C | | 4 |
| Operating voltage | | 1.8 | 3.3 | 3.7 | V | | 4 |
| Operating temperature | | -40 | | 85 | °C | Industrial design | 4 |
| Operating frequency | | 850 | | 930 | GHz | Support ISM band | 4 |
| Max Tx power | | 21.4 | 21.5 | 22.3 | dBm | | 4 |
| Receiving sensitivity | | -144 | -146 | -147 | dBm | Air data rate is 0.3kbps | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | spread on the Top Layer of the module contact part(All copper-covered and well grounded), and must be close to | 8 |
## CAD (Adom-generated)
- Symbol: `E22-900M22S`
- Footprint: `Adom_Gen:Chengdu_Ebyte_Elec_Tech_E22_76a870`
- 3D model: generated to fit the land (STEP)
- 3D model files: `e22-900m22s-etched.step` / `e22-900m22s-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `e22-900m22s.step` / `e22-900m22s.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ datasheet](docs/e22-900m22s-datasheet.pdf) (12 pp, sha256 `7106fd06fc3089ab`, retrieved 2026-11-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Ebyte gives module pad only; lands 1.6x0.8, 0.7 past the module edge, review #2688
[Datasheet PDF](docs/e22-900m22s-datasheet.pdf)