component
DX12410-L
Public Made by Adomby adom
Dersem LED Drivers, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
DX12410-L
Dersem · LED Drivers · ESOP-8
DX12410-L from Dersem, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIM | input | PWM dimming input, internally pulled up with about 100uA and defaulting high when floating; output turns off when held low and the chip enters sleep mode after low for more than 120ms, with an absolute maximum rating of -0.3 to 6.0V. |
| 2 | NC | unconnected | No connection; the datasheet specifies this pin as floating (悬空). |
| 3 | CS1 | passive | Output current sense pin 1; output current is set by the external sense resistor as IOUT = 0.137 / RCS, and the CS port is rated -0.3 to 6V. |
| 4 | CS2 | passive | Output current sense pin 2; output current is set by the external sense resistor as IOUT = 0.137 / RCS, and the CS port is rated -0.3 to 6V. |
| 5 | VDDO | power_out | 5V supply pin that can power an external PWM control chip when needed (DX1240 and DX12410 only); the datasheet lists VDDO as 5.6V and the VDD port rating as -0.3 to 6V. |
| 6 | DRAIN | output | LED driver pin connected to the internal NMOS drain; for DX12410 the output (VIOUT) withstand voltage is -0.3 to 100V. |
| 7 | VIN | power_in | Supply input with an operating range of 3.0 to 40V per the electrical table (2.5V minimum operation stated in the text) and an absolute maximum rating of -0.3 to 46V; a clamp to GND is recommended above 36V. |
| 8 | GND | power_in | Chip ground. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Dersem |
| Package | ESOP-8 |
| Category | LED Drivers |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN voltage range (operating) | VIN | 3 | 40 | V | 4 | ||
| Constant-current regulation voltage | VCS | 132 | 137 | 142 | mV | VCC＝5V | 4 |
| Output current | IOUT | 2 | A | 4 | |||
| Chip supply voltage (absolute maximum) | VIN | -0.3 | 46 | V | 3 | ||
| Output port withstand voltage, DX12410 | VIOUT | -0.3 | 100 | V | DX12410 | 3 | |
| PWM input voltage | VDIM | -0.3 | 6 | V | 3 | ||
| CS port withstand voltage | VCS | -0.3 | 6 | V | 3 | ||
| DRV port withstand voltage | VDRV | -0.3 | 6 | V | 3 | ||
| VDD port withstand voltage | VDD | -0.3 | 6 | V | 3 | ||
| Storage temperature | TSTG | -40 | 150 | ℃ | 3 | ||
| Operating temperature | TA | -40 | 125 | ℃ | 3 | ||
| ESD HBM rating | VESD | 2 | KV | HBM; printed as '>2 KV' | 3 |
CAD (KiCad official)
- Symbol:
DX12410-L - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
dx12410-l-etched.step/dx12410-l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dx12410-l.step/dx12410-l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Dersem datasheet (9 pp, sha256
dcd1102efc9dac6e, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# DX12410-L
**Dersem** · LED Drivers · ESOP-8
DX12410-L from Dersem, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIM | input | PWM dimming input, internally pulled up with about 100uA and defaulting high when floating; output turns off when held low and the chip enters sleep mode after low for more than 120ms, with an absolute maximum rating of -0.3 to 6.0V. |
| 2 | NC | unconnected | No connection; the datasheet specifies this pin as floating (悬空). |
| 3 | CS1 | passive | Output current sense pin 1; output current is set by the external sense resistor as IOUT = 0.137 / RCS, and the CS port is rated -0.3 to 6V. |
| 4 | CS2 | passive | Output current sense pin 2; output current is set by the external sense resistor as IOUT = 0.137 / RCS, and the CS port is rated -0.3 to 6V. |
| 5 | VDDO | power_out | 5V supply pin that can power an external PWM control chip when needed (DX1240 and DX12410 only); the datasheet lists VDDO as 5.6V and the VDD port rating as -0.3 to 6V. |
| 6 | DRAIN | output | LED driver pin connected to the internal NMOS drain; for DX12410 the output (VIOUT) withstand voltage is -0.3 to 100V. |
| 7 | VIN | power_in | Supply input with an operating range of 3.0 to 40V per the electrical table (2.5V minimum operation stated in the text) and an absolute maximum rating of -0.3 to 46V; a clamp to GND is recommended above 36V. |
| 8 | GND | power_in | Chip ground. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Dersem |
| Package | ESOP-8 |
| Category | LED Drivers |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN voltage range (operating) | VIN | 3 | | 40 | V | | 4 |
| Constant-current regulation voltage | VCS | 132 | 137 | 142 | mV | VCC＝5V | 4 |
| Output current | IOUT | | | 2 | A | | 4 |
| Chip supply voltage (absolute maximum) | VIN | -0.3 | | 46 | V | | 3 |
| Output port withstand voltage, DX12410 | VIOUT | -0.3 | | 100 | V | DX12410 | 3 |
| PWM input voltage | VDIM | -0.3 | | 6 | V | | 3 |
| CS port withstand voltage | VCS | -0.3 | | 6 | V | | 3 |
| DRV port withstand voltage | VDRV | -0.3 | | 6 | V | | 3 |
| VDD port withstand voltage | VDD | -0.3 | | 6 | V | | 3 |
| Storage temperature | TSTG | -40 | | 150 | ℃ | | 3 |
| Operating temperature | TA | -40 | | 125 | ℃ | | 3 |
| ESD HBM rating | VESD | 2 | | | KV | HBM; printed as '>2 KV' | 3 |
## CAD (KiCad official)
- Symbol: `DX12410-L`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm`
- 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files: `dx12410-l-etched.step` / `dx12410-l-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `dx12410-l.step` / `dx12410-l.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Dersem datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603378641678458880) (9 pp, sha256 `dcd1102efc9dac6e`, retrieved 2026-10-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/dx12410-l-datasheet.pdf)