component
DW03
Public Made by Adomby adom
Slkor SLKORMICRO Elec Battery Management, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownDW03
Slkor SLKORMICRO Elec · Battery Management · SOT-23-5
DW03 from Slkor SLKORMICRO Elec, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VT | passive | Test pin; the datasheet names it only as a test pin and gives no function or electrical limits for it. |
| 2 | GND | power_in | Ground pin; connect the negative terminal of the battery to this pin. |
| 3 | VDD | power_in | Power supply pin; the VDD input pin voltage is rated -0.3 V to +6.0 V absolute maximum. |
| 4 | VM | input | Connects to the negative terminal of the charger and to the internal discharge FET switch, which connects this terminal to GND; VM input pin voltage is rated -6.0 V to +10 V absolute maximum. |
| 5 | VM | input | Connects to the negative terminal of the charger and to the internal discharge FET switch, which connects this terminal to GND; VM input pin voltage is rated -6.0 V to +10 V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Overcharge Detection Voltage | VCU | 4.25 | 4.3 | 4.35 | V | 3 | |
| Overcharge Release Voltage | VCL | 4.05 | 4.1 | 4.15 | V | 3 | |
| Overdischarge Detection Voltage | VDL | 2.3 | 2.4 | 2.5 | V | 3 | |
| Overdischarge Release Voltage | VDR | 2.9 | 3 | 3.1 | V | 3 | |
| Current Consumption in Power Down | IPDN | 1.5 | 6 | μA | Vdd=2V, VM floating | 3 | |
| VDD input pin voltage | VIN | -0.3 | 6 | V | 3 | ||
| VM input pin voltage | VVM | -6 | 10 | V | 3 | ||
| Power Dissipation | PD | 400 | mW | Ta=25℃ | 3 | ||
| Maximum Junction Temperature | TJ | 125 | ℃ | 3 | |||
| Lead Temperature | TL | 300 | ℃ | 3 | |||
| Operating Junction Temperature | Topr | -40 | 85 | ℃ | 3 | ||
| Storage Temperature | Tstg | -55 | 150 | ℃ | 3 | ||
| ESD | ESD | 2000 | V | 3 | |||
| Charger Detection Voltage | VCHA | -0.12 | V | 3 | |||
| Overdischarge Current1 Detection | IIOV1 | 3 | A | Vdd=3.5V | 3 | ||
| Load Short-Circuiting Detection | ISHORT | 12 | A | Vdd=3.5V | 3 | ||
| Current Consumption in Normal Operation | IOPE | 2.8 | μA | Vdd=3.5V, VM=0V | 3 | ||
| Equivalent FET on Resistance | RDS | 65 | mΩ | Vdd=3.6V, IVM=1A | 3 | ||
| Over Temperature Protection | TSHD+ | 120 | ℃ | 3 | |||
| Over Temperature Recovery Degree | TSHD- | 100 | ℃ | 3 | |||
| Overcharge Voltage Detection Delay Time | TCU | 128 | ms | VDD=3.6V~4.4V | 3 | ||
| Overdischarge Voltage Detection Delay Time | TDL | 32 | ms | VDD=3.6V~2.0V | 3 | ||
| Overdischarge Current1 Detection Delay Time | TIOV1 | 8 | ms | VDD=3.6V | 3 | ||
| Load Short-Circuiting Detection Delay Time | TSHORT | 32 | μS | VDD=3.6V | 3 | ||
| Package Thermal Resistance, junction to ambient | RθJA | 250 | ℃/W | 3 | |||
| Package Thermal Resistance, junction to case | RθJc | 130 | ℃/W | 3 |
CAD (KiCad official)
- Symbol:
DW03 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
dw03-etched.step/dw03-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dw03.step/dw03.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor SLKORMICRO Elec datasheet (11 pp, sha256
cd6c9cdec7d2810b, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).