component
DSL14W
Public Made by Adomby adom
YFW Schottky Diodes, SOD-123FL. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
DSL14W
YFW · Schottky Diodes · SOD-123FL
DSL14W from YFW, in a SOD-123FL. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Cathode of the Schottky rectifier; reverse voltage rating is 40 V (DSL14W) or 60 V (DSL16W) and average forward current is 1.0 A. |
| 2 | Anode | passive | Anode of the Schottky rectifier; peak forward surge current is 30 A (8.3 ms half sine) and VF is 0.45 V (DSL14W) or 0.50 V (DSL16W) at 1 A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | YFW |
| Package | SOD-123FL |
| Category | Diodes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Repetitive Peak Reverse Voltage | VRRM | 40 | V | 1 | |||
| Maximum RMS Voltage | VRMS | 28 | V | 1 | |||
| Maximum DC Blocking Voltage | VDC | 40 | V | 1 | |||
| Maximum Average Forward Rectified Current | IF(AV) | 1 | A | 1 | |||
| Peak Forward Surge Current | IFSM | 30 | A | 8.3ms single half sine-wave superimposed on rated load (JEDEC method) | 1 | ||
| Maximum Instantaneous Forward Voltage | VF | 0.45 | V | at 1 A | 1 | ||
| Maximum Instantaneous Reverse Current | IR | 0.2 | mA | TA = 25°C, at rated DC reverse voltage | 1 | ||
| Maximum Instantaneous Reverse Current | IR | 5 | mA | TA = 100°C, at rated DC reverse voltage | 1 | ||
| Operating Junction Temperature Range | Tj | -55 | 150 | °C | 1 | ||
| Storage Temperature Range | Tstg | -55 | 150 | °C | 1 | ||
| Typical Junction Capacitance | Cj | 180 | pF | Measured at 1 MHz and applied reverse voltage of 4 V D.C | 1 | ||
| Typical Thermal Resistance | RθJA | 90 | °C/W | P.C.B. mounted with 2.0" X 2.0" (5 X 5 cm) copper pad areas | 1 |
CAD (KiCad official)
- Symbol:
DSL14W - Footprint:
Diode_SMD:D_SOD-123F - 3D model: SOD-123FL (KiCad packages3D, STEP)
- 3D model files:
dsl14w-etched.step/dsl14w-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dsl14w.step/dsl14w.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: YFW datasheet (3 pp, sha256
890c14b5851956cc, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# DSL14W
**YFW** · Schottky Diodes · SOD-123FL
DSL14W from YFW, in a SOD-123FL. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Cathode of the Schottky rectifier; reverse voltage rating is 40 V (DSL14W) or 60 V (DSL16W) and average forward current is 1.0 A. |
| 2 | Anode | passive | Anode of the Schottky rectifier; peak forward surge current is 30 A (8.3 ms half sine) and VF is 0.45 V (DSL14W) or 0.50 V (DSL16W) at 1 A. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | YFW |
| Package | SOD-123FL |
| Category | Diodes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Repetitive Peak Reverse Voltage | VRRM | | | 40 | V | | 1 |
| Maximum RMS Voltage | VRMS | | | 28 | V | | 1 |
| Maximum DC Blocking Voltage | VDC | | | 40 | V | | 1 |
| Maximum Average Forward Rectified Current | IF(AV) | | | 1 | A | | 1 |
| Peak Forward Surge Current | IFSM | | | 30 | A | 8.3ms single half sine-wave superimposed on rated load (JEDEC method) | 1 |
| Maximum Instantaneous Forward Voltage | VF | | | 0.45 | V | at 1 A | 1 |
| Maximum Instantaneous Reverse Current | IR | | | 0.2 | mA | TA = 25°C, at rated DC reverse voltage | 1 |
| Maximum Instantaneous Reverse Current | IR | | | 5 | mA | TA = 100°C, at rated DC reverse voltage | 1 |
| Operating Junction Temperature Range | Tj | -55 | | 150 | °C | | 1 |
| Storage Temperature Range | Tstg | -55 | | 150 | °C | | 1 |
| Typical Junction Capacitance | Cj | | 180 | | pF | Measured at 1 MHz and applied reverse voltage of 4 V D.C | 1 |
| Typical Thermal Resistance | RθJA | | 90 | | °C/W | P.C.B. mounted with 2.0" X 2.0" (5 X 5 cm) copper pad areas | 1 |
## CAD (KiCad official)
- Symbol: `DSL14W`
- Footprint: `Diode_SMD:D_SOD-123F`
- 3D model: SOD-123FL (KiCad packages3D, STEP)
- 3D model files: `dsl14w-etched.step` / `dsl14w-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `dsl14w.step` / `dsl14w.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [YFW datasheet](docs/dsl14w-datasheet.pdf) (3 pp, sha256 `890c14b5851956cc`, retrieved 2026-10-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/dsl14w-datasheet.pdf)