DSC6101ML3B-025.0000 from Microchip Tech, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OE/STDBY/FS	input	Control pin configured as OE for this MPN (selection code 0): H = output active, L = output disabled (high impedance), with a 300 kΩ internal pull-up on DSC610xB/1xB/3xB parts and VIH of 0.7 x VDD minimum and VIL of 0.3 x VDD maximum.
2	GND	power_in	Ground terminal of the oscillator.
3	Output	output	Oscillator clock output; standard drive (61x1) delivers greater than 3 mA at 20%/80% of the supply voltage.
4	VDD	power_in	Power supply input, 1.71 V to 3.63 V, which should be filtered with a 0.1 µF capacitor.

Key specifications

Parameter	Value
Manufacturer	Microchip Tech
Package	SMD2016-4P
Category	Crystal Oscillator/Oscillator/Resonator
Pins	4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Max	Unit	Conditions	Page
Supply Voltage	VDD	1.71	3.63	V	Note 1	3
Power Supply Ramp	tPU	0.1	100	ms	Note 8	3
Frequency	f0	0.0035	100	MHz		3
Frequency Stability	Δf	-20	20	ppm	All temp ranges, Note 3	3
Aging, 1st year	Δf	-5	5	ppm	1st year @ 25°C	3
Aging, per year after first year	Δf	-1	1	ppm	Per year after first year	3
Startup Time	tSU		1.5	ms	From 90% VDD to valid clock output, T = 25°C	3
Input Logic High	VIH	0.7		x VDD	Input Logic High, Note 4 (printed 0.7 x VDD)	3
Input Logic Low	VIL		0.3	x VDD	Input Logic Low, Note 4 (printed 0.3 x VDD)	3
Output Disable Time	tDA		200	ns	Printed as 200 + 2 Periods ns; Note 5: up to two output periods + 200 ns	3
Output Enable Time	tEN		1	µs	For parts configured with OE, not Standby; Note 6	3
Output Duty Cycle	SYM	45	55	%		3
Output Logic High (Std. Drive)	VOH	0.8		x VDD	Output Logic High, I = 3 mA, Std. Drive (printed 0.8 x VDD)	4
Output Logic Low (Std. Drive)	VOL		0.2	x VDD	Output Logic Low, I = -3 mA, Std. Drive (printed 0.2 x VDD)	4
Output Transition Time Rise/Fall (DSC61x1)	tRY/tFY		2	ns	DSC61x1 Std Drive, 20% to 80%, CL = 10 pF, VDD = 1.8V	4
Output Transition Time Rise/Fall (DSC61x1)	tRY/tFY		1.2	ns	VDD = 2.5V/3.3V (DSC61x1 Std Drive, 20% to 80%, CL = 10 pF as printed in the block)	4
Cycle-to-Cycle Jitter (Peak)	JCy-Cy		70	ps	fOUT = 27 MHz, VDD = 1.8V	4
Cycle-to-Cycle Jitter (Peak)	JCy-Cy		60	ps	fOUT = 27 MHz, VDD = 2.5V/3.3V	4
Junction Operating Temperature	TJ	-40	150	°C		5
Storage Ambient Temperature Range	TA	-55	150	°C		5
Supply Voltage (absolute maximum)	VDD	-0.3	4	V	Absolute Maximum Ratings	3
Input Voltage (absolute maximum)	VIN	-0.3		V	Printed max as VDD+0.3V	3
ESD Protection HBM			4	kV	HBM	3
ESD Protection MM			400	V	MM	3
ESD Protection CDM			2	kV	CDM	3

CAD (KiCad official)

Symbol: DSC6101ML3B-025.0000
Footprint: Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm
3D model: SMD2016-4P (KiCad packages3D, STEP)
3D model files: dsc6101ml3b-025-0000-etched.step / dsc6101ml3b-025-0000-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); dsc6101ml3b-025-0000.step / dsc6101ml3b-025-0000.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Microchip Tech datasheet (24 pp, sha256 67da14342431965c, retrieved 2026-11-12, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

DSC6101ML3B-025.0000

Verified DSC6101ML3B-025.0000

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README