component
DSC6101JL2B-033.3333
Public Made by Adomby adom
Microchip Tech Programmable Oscillators, SMD2520-4P. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownDSC6101JL2B-033.3333
Microchip Tech · Programmable Oscillators · SMD2520-4P
DSC6101JL2B-033.3333 from Microchip Tech, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable pin, configured as OE for this part number (pin 1 code 0): H enables the output and L disables it to high impedance; the DSC610xB variant has a 300 kΩ internal pull-up resistor on this pin. |
| 2 | GND | power_in | Ground supply terminal for the oscillator. |
| 3 | OUT | output | Oscillator clock output; the buffer is Standard Drive for this part (drive code 1), which the datasheet specifies at more than 3 mA at 20%/80% of the supply voltage. |
| 4 | VDD | power_in | Power supply input, 1.71 V to 3.63 V, which the datasheet says should be filtered with a 0.1 µF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SMD2520-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 1.71 | 3.63 | V | Note 1 | 3 | |
| Supply Voltage (absolute maximum) | -0.3 | 4 | V | 3 | |||
| Power Supply Ramp | tPU | 0.1 | 100 | ms | Note 8 | 3 | |
| Output Duty Cycle | SYM | 45 | 55 | % | 3 | ||
| Frequency Range | f0 | 0.0035 | 100 | MHz | 3 | ||
| Frequency Stability | Δf | -25 | 25 | ppm | All temp ranges, Note 3 | 3 | |
| Aging, 1st year | Δf | -5 | 5 | ppm | 1st year @ 25°C | 3 | |
| Aging, after first year | Δf | -1 | 1 | ppm | Per year after first year | 3 | |
| Startup Time | tSU | 1.5 | ms | From 90% VDD to valid clock output, T = 25°C | 3 | ||
| Output Enable Time | tEN | 1 | µs | Note 6 | 3 | ||
| Cycle-to-Cycle Jitter (Peak) | JCy-Cy | 50 | 70 | ps | fOUT = 27 MHz, VDD = 1.8V | 4 | |
| Cycle-to-Cycle Jitter (Peak) | JCy-Cy | 35 | 60 | ps | fOUT = 27 MHz, VDD = 2.5V/3.3V | 4 | |
| Output Rise/Fall Time, Std Drive (DSC61x1) | tRY/tFY | 1.2 | 2 | ns | DSC61x1 Std Drive, 20% to 80%, CL = 10 pF, VDD = 1.8V | 4 | |
| Output Rise/Fall Time, Std Drive (DSC61x1) | tRY/tFY | 0.6 | 1.2 | ns | DSC61x1 Std Drive, 20% to 80%, CL = 10 pF, VDD = 2.5V/3.3V | 4 | |
| Junction Operating Temperature | TJ | -40 | 150 | °C | 5 | ||
| Storage Ambient Temperature Range | TA | -55 | 150 | °C | 5 | ||
| Operating Temperature Range, Extended Industrial grade (L) | -40 | 105 | °C | Part-number temperature code L; Features list | 1 |
CAD (KiCad official)
- Symbol:
DSC6101JL2B-033.3333 - Footprint:
Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm - 3D model: SMD2520-4P (KiCad packages3D, STEP)
- 3D model files:
dsc6101jl2b-033-3333-etched.step/dsc6101jl2b-033-3333-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dsc6101jl2b-033-3333.step/dsc6101jl2b-033-3333.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (24 pp, sha256
67da14342431965c, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).