main
Ray
Publish 0.1.0
f3ab58d
DSC1123CI2-200.0000T
Microchip · Crystals, Oscillators, Resonators · 6-VDFN
DSC1123CI2-200.0000T from Microchip, in a 6-VDFN. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable (Enable/Disable mode on DSC1123: Table 2-2). |
| 2 | NC | no_connect | Do not connect. |
| 3 | GND | power_in | Ground. |
| 4 | OUT | output | LVDS clock output +. |
| 5 | OUT- | output | LVDS clock output -. |
| 6 | VDD | power_in | Supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip |
| Package | 6-VDFN |
| Category | Crystals, Oscillators, Resonators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2.25 | 3.63 | V | 2 | ||
| Supply Current (EN low, outputs disabled) | IDD | 20 | 22 | mA | DSC1123, EN pin low; all outputs disabled | 2 | |
| Frequency Stability | Δf | -25 | 25 | ppm | Includes frequency variations due to initial tolerance, temp., and power supply voltage | 2 | |
| Aging - First Year | ΔfY1 | -5 | 5 | ppm | One year at +25°C | 2 | |
| Aging - After First Year | ΔfY2+ | 1 | ppm/yr | Year two and beyond at +25°C; printed <±1 | 2 | ||
| Start-up Time | tSU | 5 | ms | T = +25°C | 2 | ||
| Input Logic High | VIH | 0.75 | V | 0.75 x VDD, Input logic high | 2 | ||
| Input Logic Low | VIL | 0.25 | V | 0.25 x VDD, Input logic low | 2 | ||
| Output Disable Time | tDA | 5 | ns | 2 | |||
| Output Enable Time | tEN | 20 | ns | DSC1123 | 2 | ||
| Supply Current (LVDS output enabled) | IDD | 29 | 32 | mA | Output enabled, RL = 100Ω | 2 | |
| Output Offset Voltage | VOS | 1.125 | 1.4 | V | R = 100Ω Differential | 2 | |
| Delta Offset Voltage | ΔVOS | 50 | mV | 2 | |||
| Output Frequency | f0 | 2.3 | 460 | MHz | -20°C to +70°C & -40°C to +85°C | 3 | |
| Output Duty Cycle | SYM | 48 | 52 | % | Differential | 3 | |
| Integrated Phase Noise (12 kHz to 20 MHz) | JPH | 1.7 | 2 | psRMS | 12 kHz to 20 MHz @156.25 MHz | 3 | |
| Operating Temperature Range | TA | -40 | 85 | °C | Ordering Option I | 4 | |
| Maximum Junction Temperature | TJ | 150 | °C | 4 | |||
| Storage Temperature Range | TS | -55 | 150 | °C | 4 | ||
| Soldering Temperature | 260 | °C | 40 sec. max. | 4 | |||
| Supply Voltage (absolute maximum) | VDD | -0.3 | 4 | V | 2 | ||
| Input Voltage (absolute maximum) | -0.3 | V | -0.3V to VDD+0.3V | 2 | |||
| ESD Protection (HBM) | 4 | kV | HBM | 2 | |||
| Enable Pull-Up Resistor | RPU | 40 | kΩ | Pull-up resistor exist | 2 | ||
| Peak-to-Peak Output Swing | VPP | 350 | mV | Single-Ended | 2 | ||
| Output Transition Rise/Fall Time | tR/tF | 200 | ps | 20% to 80%, RL = 50Ω, CL = 2 pF | 3 | ||
| Period Jitter | JPER | 2.5 | psRMS | 3 | |||
| Integrated Phase Noise (200 kHz to 20 MHz) | JPH | 0.28 | psRMS | 200 kHz to 20 MHz @156.25 MHz | 3 | ||
| Integrated Phase Noise (100 kHz to 20 MHz) | JPH | 0.4 | psRMS | 100 kHz to 20 MHz @156.25 MHz | 3 |
CAD (Adom-generated)
- Symbol:
DSC1123CI2-200.0000T - Footprint:
Adom_Gen:Microchip_DSC1123_026348 - 3D model: generated to fit the land (STEP)
- 3D model files:
dsc1123ci2-200-0000t-etched.step/dsc1123ci2-200-0000t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dsc1123ci2-200-0000t.step/dsc1123ci2-200-0000t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip datasheet (27 pp, sha256
4e58bb7768601ddb, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Microchip DSC1103/23 DS20005745E p.14 '6-Lead VDFN 3.2 mm x 2.5 mm Package Outline and Recommended Land Pattern' (drawing C04-3007A): contact pitch E 1.05 BSC, contact pad spacing C 1.60, outer pads X1 1.00 max (x4), middle pads X2 0.60 max (x2), pad length Y 0.85 max, G1 0.25 min; pin 1 bottom-left, 2 bottom-middle, 6 top-left (counter-clockwise). Body from p.16 (H5A, 3.2x2.5 mm VDFN): D 3.20, E 2.50, A 0.80/0.85/0.90.
# DSC1123CI2-200.0000T
**Microchip** · Crystals, Oscillators, Resonators · 6-VDFN
DSC1123CI2-200.0000T from Microchip, in a 6-VDFN. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable (Enable/Disable mode on DSC1123: Table 2-2). |
| 2 | NC | no_connect | Do not connect. |
| 3 | GND | power_in | Ground. |
| 4 | OUT | output | LVDS clock output +. |
| 5 | OUT- | output | LVDS clock output -. |
| 6 | VDD | power_in | Supply voltage. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip |
| Package | 6-VDFN |
| Category | Crystals, Oscillators, Resonators |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2.25 | | 3.63 | V | | 2 |
| Supply Current (EN low, outputs disabled) | IDD | | 20 | 22 | mA | DSC1123, EN pin low; all outputs disabled | 2 |
| Frequency Stability | Δf | -25 | | 25 | ppm | Includes frequency variations due to initial tolerance, temp., and power supply voltage | 2 |
| Aging - First Year | ΔfY1 | -5 | | 5 | ppm | One year at +25°C | 2 |
| Aging - After First Year | ΔfY2+ | | | 1 | ppm/yr | Year two and beyond at +25°C; printed <±1 | 2 |
| Start-up Time | tSU | | | 5 | ms | T = +25°C | 2 |
| Input Logic High | VIH | 0.75 | | | V | 0.75 x VDD, Input logic high | 2 |
| Input Logic Low | VIL | | | 0.25 | V | 0.25 x VDD, Input logic low | 2 |
| Output Disable Time | tDA | | | 5 | ns | | 2 |
| Output Enable Time | tEN | | | 20 | ns | DSC1123 | 2 |
| Supply Current (LVDS output enabled) | IDD | | 29 | 32 | mA | Output enabled, RL = 100Ω | 2 |
| Output Offset Voltage | VOS | 1.125 | | 1.4 | V | R = 100Ω Differential | 2 |
| Delta Offset Voltage | ΔVOS | | | 50 | mV | | 2 |
| Output Frequency | f0 | 2.3 | | 460 | MHz | -20°C to +70°C & -40°C to +85°C | 3 |
| Output Duty Cycle | SYM | 48 | | 52 | % | Differential | 3 |
| Integrated Phase Noise (12 kHz to 20 MHz) | JPH | | 1.7 | 2 | psRMS | 12 kHz to 20 MHz @156.25 MHz | 3 |
| Operating Temperature Range | TA | -40 | | 85 | °C | Ordering Option I | 4 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 4 |
| Storage Temperature Range | TS | -55 | | 150 | °C | | 4 |
| Soldering Temperature | | | | 260 | °C | 40 sec. max. | 4 |
| Supply Voltage (absolute maximum) | VDD | -0.3 | | 4 | V | | 2 |
| Input Voltage (absolute maximum) | | -0.3 | | | V | -0.3V to VDD+0.3V | 2 |
| ESD Protection (HBM) | | | | 4 | kV | HBM | 2 |
| Enable Pull-Up Resistor | RPU | | 40 | | kΩ | Pull-up resistor exist | 2 |
| Peak-to-Peak Output Swing | VPP | | 350 | | mV | Single-Ended | 2 |
| Output Transition Rise/Fall Time | tR/tF | | 200 | | ps | 20% to 80%, RL = 50Ω, CL = 2 pF | 3 |
| Period Jitter | JPER | | 2.5 | | psRMS | | 3 |
| Integrated Phase Noise (200 kHz to 20 MHz) | JPH | | 0.28 | | psRMS | 200 kHz to 20 MHz @156.25 MHz | 3 |
| Integrated Phase Noise (100 kHz to 20 MHz) | JPH | | 0.4 | | psRMS | 100 kHz to 20 MHz @156.25 MHz | 3 |
## CAD (Adom-generated)
- Symbol: `DSC1123CI2-200.0000T`
- Footprint: `Adom_Gen:Microchip_DSC1123_026348`
- 3D model: generated to fit the land (STEP)
- 3D model files: `dsc1123ci2-200-0000t-etched.step` / `dsc1123ci2-200-0000t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `dsc1123ci2-200-0000t.step` / `dsc1123ci2-200-0000t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/TCG/ProductDocuments/DataSheets/DSC1103-23-Low-Jitter-Precision-LVDS-Oscillator-DS20005745.pdf) (27 pp, sha256 `4e58bb7768601ddb`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Microchip DSC1103/23 DS20005745E p.14 '6-Lead VDFN 3.2 mm x 2.5 mm Package Outline and Recommended Land Pattern' (drawing C04-3007A): contact pitch E 1.05 BSC, contact pad spacing C 1.60, outer pads X1 1.00 max (x4), middle pads X2 0.60 max (x2), pad length Y 0.85 max, G1 0.25 min; pin 1 bottom-left, 2 bottom-middle, 6 top-left (counter-clockwise). Body from p.16 (H5A, 3.2x2.5 mm VDFN): D 3.20, E 2.50, A 0.80/0.85/0.90.
[Datasheet PDF](docs/dsc1123ci2-200-0000t-datasheet.pdf)