component
DS9801AS6
Public Made by Adomby adom
DSTECH Surge Suppressors, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownDS9801AS6
DSTECH · Surge Suppressors · SOT-23-6
DS9801AS6 from DSTECH, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin, one of four GND pins (1, 2, 5, 6) in the SOT-23-6 package. |
| 2 | GND | power_in | Ground pin, one of four GND pins (1, 2, 5, 6) in the SOT-23-6 package. |
| 3 | VIN | power_in | Power input; recommended 2.2V to 6V, absolute maximum -0.3V to 36V, and the internal MOSFET turns off above the 6.0V typical OVP threshold. |
| 4 | VOUT | power_out | Power output through the 100mΩ typical internal MOSFET; absolute maximum -0.3V to 6V, with 2A (Type A, 2.5A typical) overcurrent protection on the DS9801AS6. |
| 5 | GND | power_in | Ground pin, one of four GND pins (1, 2, 5, 6) in the SOT-23-6 package. |
| 6 | GND | power_in | Ground pin, one of four GND pins (1, 2, 5, 6) in the SOT-23-6 package. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | DSTECH |
| Package | SOT-23-6 |
| Category | TVS/Fuse/Board Level Protection |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Over-voltage protection threshold | VOVP | 5.82 | 6 | 6.18 | V | VIN=5V, TA=25°C | 4 |
| Over-current protection point (Type A) | 2 | 2.5 | A | Type A | 4 | ||
| Input voltage | VIN | 2.2 | 6 | V | 4 | ||
| Input voltage recommended | VIN | 2.2 | 6 | V | 3 | ||
| VIN to GND | VIN | -0.3 | 36 | V | 3 | ||
| VOUT to GND | VOUT | -0.3 | 6 | V | 3 | ||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Storage temperature | -60 | 150 | °C | 3 | |||
| Lead soldering temperature | 260 | °C | 10 sec | 3 | |||
| ESD HBM | HBM | 2 | kV | 3 | |||
| ESD MM | MM | 200 | V | 3 | |||
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| Operating ambient temperature | TA | -40 | 85 | °C | 3 | ||
| Thermal resistance junction-to-ambient | θJA | 200 | °C/W | SOT-23-6, TA=25°C, DSTECH EVB | 3 | ||
| UVLO threshold | VIN_UVLO | 2.9 | V | VIN Rising | 4 | ||
| UVLO hysteresis | VUVLO_HYS | 1 | V | 4 | |||
| Quiescent current | IQ | 50 | μA | 4 | |||
| POR deglitch time | TPOR | 20 | mS | 4 | |||
| Soft-start time | TSS | 1 | mS | VOUT 10% to 90% | 4 | ||
| VIN-to-VOUT on resistance | RON | 100 | mΩ | 4 | |||
| VOUT discharge resistance | RDIS | 500 | Ω | 4 | |||
| OVP hysteresis | VOVP_HYS | 300 | mV | 4 | |||
| OVP turn-off delay | TOVP_PD | 0.2 | uS | 4 | |||
| OVP recovery delay | TOVP_RD | 20 | mS | 4 | |||
| OCP blanking time | TOCP_BT | 8 | mS | 4 | |||
| OCP recovery delay | TOCP_RD | 800 | mS | 4 | |||
| Thermal shutdown temperature | TSD | 150 | °C | ILOAD=10mA | 4 | ||
| Thermal shutdown hysteresis | ΔTSD | 30 | °C | 4 |
CAD (KiCad official)
- Symbol:
DS9801AS6 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ds9801as6-etched.step/ds9801as6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ds9801as6.step/ds9801as6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: DSTECH datasheet (9 pp, sha256
1555c398ab3e8602, retrieved 2026-10-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).