component
DS90UB929TRGCRQ1
Public Made by Adomby adom
Texas Instruments Serializers, Deserializers, VQFN-64-EP(9x9). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+35−32@@ -32,7 +32,7 @@ "number": "1", "name": "CEC", "type": "bidirectional",- "description": "HDMI Consumer Electronic Control (CEC) channel input/output. Open-drain; requires an external 27 k\u03a9 pullup to 3.3 V."+ "description": "HDMI Consumer Electronic Control (CEC) channel input/output. Open-drain; requires an external 27 kΩ pullup to 3.3 V." }, { "number": "2",@@ -44,7 +44,7 @@ "number": "3", "name": "VDDIO", "type": "power_in",- "description": "1.8 V (\u00b15%) IO supply."+ "description": "1.8 V (±5%) IO supply." }, { "number": "4",@@ -62,25 +62,25 @@ "number": "6", "name": "SCLK/I2CSEL", "type": "bidirectional",- "description": "I2CSEL strap at power-up (LVCMOS input): tie to VDDIO via 10 k\u03a9 for 1.8 V I2C, leave floating for 3.3 V I2C. After power-up the pin switches to Master-mode I2S Clock output (SCLK), shared with GPIO1 function."+ "description": "I2CSEL strap at power-up (LVCMOS input): tie to VDDIO via 10 kΩ for 1.8 V I2C, leave floating for 3.3 V I2C. After power-up the pin switches to Master-mode I2S Clock output (SCLK), shared with GPIO1 function." }, { "number": "7", "name": "VDDL11", "type": "power_in",- "description": "1.1 V (\u00b15%) digital supply."+ "description": "1.1 V (±5%) digital supply." }, { "number": "8", "name": "VDDA11", "type": "power_in",- "description": "1.1 V (\u00b15%) analog supply (inferred from pinout diagram - the Pin Functions text table only lists pin 9 for VDDA11)."+ "description": "1.1 V (±5%) analog supply (inferred from pinout diagram - the Pin Functions text table only lists pin 9 for VDDA11)." }, { "number": "9", "name": "VDDA11", "type": "power_in",- "description": "1.1 V (\u00b15%) analog supply."+ "description": "1.1 V (±5%) analog supply." }, { "number": "10",@@ -104,19 +104,19 @@ "number": "13", "name": "INTB", "type": "output",- "description": "Local interrupt output. Open-drain, active LOW. Pull up to VDDIO with 4.7 k\u03a9."+ "description": "Local interrupt output. Open-drain, active LOW. Pull up to VDDIO with 4.7 kΩ." }, { "number": "14", "name": "SDA", "type": "bidirectional",- "description": "I2C serial data. Open-drain; external pull-up to 1.8 V or 3.3 V required (see I2CSEL). Recommended 4.7 k\u03a9. Do not float."+ "description": "I2C serial data. Open-drain; external pull-up to 1.8 V or 3.3 V required (see I2CSEL). Recommended 4.7 kΩ. Do not float." }, { "number": "15", "name": "SCL", "type": "bidirectional",- "description": "I2C serial clock. Open-drain; external pull-up to 1.8 V or 3.3 V required (see I2CSEL). Recommended 4.7 k\u03a9. Do not float."+ "description": "I2C serial clock. Open-drain; external pull-up to 1.8 V or 3.3 V required (see I2CSEL). Recommended 4.7 kΩ. Do not float." }, { "number": "16",@@ -128,7 +128,7 @@ "number": "17", "name": "VDDP11", "type": "power_in",- "description": "1.1 V (\u00b15%) PLL supply."+ "description": "1.1 V (±5%) PLL supply." }, { "number": "18",@@ -152,7 +152,7 @@ "number": "21", "name": "VDDHS11", "type": "power_in",- "description": "1.1 V (\u00b15%) supply."+ "description": "1.1 V (±5%) supply." }, { "number": "22",@@ -170,31 +170,31 @@ "number": "24", "name": "VDD18", "type": "power_in",- "description": "1.8 V (\u00b15%) analog supply."+ "description": "1.8 V (±5%) analog supply." }, { "number": "25", "name": "VDDS11", "type": "power_in",- "description": "1.1 V (\u00b15%) serializer supply."+ "description": "1.1 V (±5%) serializer supply." }, { "number": "26", "name": "DOUT-", "type": "output",- "description": "FPD-Link III inverting differential output. AC-couple with 0.1 \u00b5F (92x deserializers) or 33 nF (94x deserializers)."+ "description": "FPD-Link III inverting differential output. AC-couple with 0.1 µF (92x deserializers) or 33 nF (94x deserializers)." }, { "number": "27", "name": "DOUT+", "type": "output",- "description": "FPD-Link III true differential output. AC-couple with 0.1 \u00b5F (92x deserializers) or 33 nF (94x deserializers)."+ "description": "FPD-Link III true differential output. AC-couple with 0.1 µF (92x deserializers) or 33 nF (94x deserializers)." }, { "number": "28", "name": "VDDHS11", "type": "power_in",- "description": "1.1 V (\u00b15%) supply."+ "description": "1.1 V (±5%) supply." }, { "number": "29",@@ -206,7 +206,7 @@ "number": "30", "name": "RES2", "type": "passive",- "description": "Reserved. Connect with a 50 \u03a9 resistor to GND."+ "description": "Reserved. Connect with a 50 Ω resistor to GND." }, { "number": "31",@@ -260,25 +260,25 @@ "number": "39", "name": "X1", "type": "input",- "description": "Optional oscillator input. 25 MHz \u00b10.1% (1000 ppm), 45-55% duty, CMOS-level 1.8 V reference clock used only for CEC. Leave open if unused."+ "description": "Optional oscillator input. 25 MHz ±0.1% (1000 ppm), 45-55% duty, CMOS-level 1.8 V reference clock used only for CEC. Leave open if unused." }, { "number": "40", "name": "REM_INTB", "type": "output",- "description": "Remote interrupt output. Open-drain; mirrors the deserializer's INTB_IN status. Pull up to 1.8 V (recommended 4.7 k\u03a9). H = normal, L = interrupt request."+ "description": "Remote interrupt output. Open-drain; mirrors the deserializer's INTB_IN status. Pull up to 1.8 V (recommended 4.7 kΩ). H = normal, L = interrupt request." }, { "number": "41", "name": "VDDL11", "type": "power_in",- "description": "1.1 V (\u00b15%) digital supply."+ "description": "1.1 V (±5%) digital supply." }, { "number": "42", "name": "HPD", "type": "output",- "description": "HDMI Hot Plug Detect output. Open-drain; pull up to RX_5V with a 1 k\u03a9 resistor."+ "description": "HDMI Hot Plug Detect output. Open-drain; pull up to RX_5V with a 1 kΩ resistor." }, { "number": "43",@@ -290,19 +290,19 @@ "number": "44", "name": "DDC_SDA", "type": "bidirectional",- "description": "HDMI DDC slave serial data. Open-drain; pull up to RX_5V with 47 k\u03a9."+ "description": "HDMI DDC slave serial data. Open-drain; pull up to RX_5V with 47 kΩ." }, { "number": "45", "name": "DDC_SCL", "type": "input",- "description": "HDMI DDC slave serial clock. Open-drain; pull up to RX_5V with 47 k\u03a9."+ "description": "HDMI DDC slave serial clock. Open-drain; pull up to RX_5V with 47 kΩ." }, { "number": "46", "name": "VDDIO", "type": "power_in",- "description": "1.8 V (\u00b15%) IO supply."+ "description": "1.8 V (±5%) IO supply." }, { "number": "47",@@ -332,13 +332,13 @@ "number": "51", "name": "VDD18", "type": "power_in",- "description": "1.8 V (\u00b15%) analog supply."+ "description": "1.8 V (±5%) analog supply." }, { "number": "52", "name": "VDDHA11", "type": "power_in",- "description": "1.1 V (\u00b15%) TMDS supply."+ "description": "1.1 V (±5%) TMDS supply." }, { "number": "53",@@ -350,7 +350,7 @@ "number": "54", "name": "VDDHA11", "type": "power_in",- "description": "1.1 V (\u00b15%) TMDS supply."+ "description": "1.1 V (±5%) TMDS supply." }, { "number": "55",@@ -368,13 +368,13 @@ "number": "57", "name": "VTERM", "type": "power_in",- "description": "HDMI TMDS input termination supply. Connect to 3.3 V (\u00b15%) for DC-coupled input, or 1.8 V (\u00b15%) for AC-coupled input."+ "description": "HDMI TMDS input termination supply. Connect to 3.3 V (±5%) for DC-coupled input, or 1.8 V (±5%) for AC-coupled input." }, { "number": "58", "name": "VDDHA11", "type": "power_in",- "description": "1.1 V (\u00b15%) TMDS supply."+ "description": "1.1 V (±5%) TMDS supply." }, { "number": "59",@@ -392,7 +392,7 @@ "number": "61", "name": "VDDHA11", "type": "power_in",- "description": "1.1 V (\u00b15%) TMDS supply."+ "description": "1.1 V (±5%) TMDS supply." }, { "number": "62",@@ -410,7 +410,7 @@ "number": "64", "name": "VDD18", "type": "power_in",- "description": "1.8 V (\u00b15%) analog supply."+ "description": "1.8 V (±5%) analog supply." }, { "number": "65",@@ -490,5 +490,8 @@ "docs/ds90ub929trgcrq1-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }