component
DS90LV048ATMTC
Public Made by Adomby adom
Texas Instruments LVDS ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDS90LV048ATMTC
Texas Instruments · LVDS ICs · TSSOP-16
DS90LV048ATMTC from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RIN− | input | Inverting receiver input; the absolute input voltage range is -0.3 V to 3.6 V and the common-mode range for AC specifications is 0.1 V to 2.3 V. |
| 2 | RIN+ | input | Noninverting receiver input; the absolute input voltage range is -0.3 V to 3.6 V and the common-mode range for AC specifications is 0.1 V to 2.3 V. |
| 3 | RIN+ | input | Noninverting receiver input; the absolute input voltage range is -0.3 V to 3.6 V and the common-mode range for AC specifications is 0.1 V to 2.3 V. |
| 4 | RIN− | input | Inverting receiver input; the absolute input voltage range is -0.3 V to 3.6 V and the common-mode range for AC specifications is 0.1 V to 2.3 V. |
| 5 | RIN− | input | Inverting receiver input; the absolute input voltage range is -0.3 V to 3.6 V and the common-mode range for AC specifications is 0.1 V to 2.3 V. |
| 6 | RIN+ | input | Noninverting receiver input; the absolute input voltage range is -0.3 V to 3.6 V and the common-mode range for AC specifications is 0.1 V to 2.3 V. |
| 7 | RIN+ | input | Noninverting receiver input; the absolute input voltage range is -0.3 V to 3.6 V and the common-mode range for AC specifications is 0.1 V to 2.3 V. |
| 8 | RIN− | input | Inverting receiver input; the absolute input voltage range is -0.3 V to 3.6 V and the common-mode range for AC specifications is 0.1 V to 2.3 V. |
| 9 | EN* | input | Active-low receiver enable: when EN* is high the receiver is disabled, and when EN* is low or open and EN is high the receiver is enabled. |
| 10 | ROUT | output | Receiver output, which goes to TRI-STATE when the receiver is disabled and is limited to -0.3 V to VCC + 0.3 V. |
| 11 | ROUT | output | Receiver output, which goes to TRI-STATE when the receiver is disabled and is limited to -0.3 V to VCC + 0.3 V. |
| 12 | GND | power_in | Ground pin; all voltages are referenced to this pin. |
| 13 | VCC | power_in | Power supply pin, +3.3 V ±0.3 V (recommended supply range 3 V to 3.6 V, absolute maximum 4 V). |
| 14 | ROUT | output | Receiver output, which goes to TRI-STATE when the receiver is disabled and is limited to -0.3 V to VCC + 0.3 V. |
| 15 | ROUT | output | Receiver output, which goes to TRI-STATE when the receiver is disabled and is limited to -0.3 V to VCC + 0.3 V. |
| 16 | EN | input | Active-high receiver enable: when EN is low the receiver is disabled, and when EN is high and EN* is low or open the receiver is enabled. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
DS90LV048ATMTC - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
ds90lv048atmtc-etched.step/ds90lv048atmtc-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ds90lv048atmtc.step/ds90lv048atmtc.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
59aca1e089c7c4a4, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).