DS90C032BTM

{
  "schema_version": 1,
  "type": "component",
  "slug": "ds90c032btm",
  "title": "DS90C032BTM",
  "brief": "Texas Instruments Pre-ordered Chips, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface ics",
    "ds90c032btm",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "DS90C032BTM",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16",
    "pin_count": 16,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ds90c032btm.pdf",
    "parts": {
      "symbol": "ds90c032btm.kicad_sym",
      "footprint": "ds90c032btm.kicad_mod",
      "model_3d": "ds90c032btm-hero.glb",
      "model_3d_plain": "ds90c032btm-etched.glb",
      "model_3d_step": "ds90c032btm-etched.step",
      "model_3d_step_plain": "ds90c032btm.step",
      "lbr": "ds90c032btm.lbr"
    },
    "distributor_links": {
      "lcsc": "C1544100",
      "digikey": "DS90C032BTM-ND",
      "mouser": "926-DS90C032BTM"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T22:56:59Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "DS90C032BTM-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "926-DS90C032BTM",
        "status": "found",
        "lifecycle": "Obsolete"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RIN−",
        "type": "input",
        "description": "Inverting receiver input pin; each LVDS input operates over 0V to +2.4V measured from each pin to ground, and unused receiver inputs must be left open rather than tied to ground or any other voltage."
      },
      {
        "number": "2",
        "name": "RIN+",
        "type": "input",
        "description": "Non-inverting receiver input pin; each LVDS input operates over 0V to +2.4V measured from each pin to ground, and the receiver detects signals as low as 100 mV over a ±1V common-mode range centered around +1.2V."
      },
      {
        "number": "3",
        "name": "ROUT",
        "type": "tri_state",
        "description": "Receiver CMOS (TTL compatible) output that goes HIGH for both failsafe conditions and is in TRI-STATE when the receiver is disabled."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "Active high enable pin, OR-ed with EN*; the receiver is disabled (output Z) when EN is low and EN* is high."
      },
      {
        "number": "5",
        "name": "ROUT",
        "type": "tri_state",
        "description": "Receiver CMOS (TTL compatible) output that goes HIGH for both failsafe conditions and is in TRI-STATE when the receiver is disabled."
      },
      {
        "number": "6",
        "name": "RIN+",
        "type": "input",
        "description": "Non-inverting receiver input pin; each LVDS input operates over 0V to +2.4V measured from each pin to ground, and the receiver detects signals as low as 100 mV over a ±1V common-mode range centered around +1.2V."
      },
      {
        "number": "7",
        "name": "RIN−",
        "type": "input",
        "description": "Inverting receiver input pin; each LVDS input operates over 0V to +2.4V measured from each pin to ground, and unused receiver inputs must be left open rather than tied to ground or any other voltage."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin for the device."
      },
      {
        "number": "9",
        "name": "RIN−",
        "type": "input",
        "description": "Inverting receiver input pin; each LVDS input operates over 0V to +2.4V measured from each pin to ground, and unused receiver inputs must be left open rather than tied to ground or any other voltage."
      },
      {
        "number": "10",
        "name": "RIN+",
        "type": "input",
        "description": "Non-inverting receiver input pin; each LVDS input operates over 0V to +2.4V measured from each pin to ground, and the receiver detects signals as low as 100 mV over a ±1V common-mode range centered around +1.2V."
      },
      {
        "number": "11",
        "name": "ROUT",
        "type": "tri_state",
        "description": "Receiver CMOS (TTL compatible) output that goes HIGH for both failsafe conditions and is in TRI-STATE when the receiver is disabled."
      },
      {
        "number": "12",
        "name": "EN*",
        "type": "input",
        "description": "Active low enable pin, OR-ed with EN; the receiver is disabled (output Z) when EN* is high and EN is low."
      },
      {
        "number": "13",
        "name": "ROUT",
        "type": "tri_state",
        "description": "Receiver CMOS (TTL compatible) output that goes HIGH for both failsafe conditions and is in TRI-STATE when the receiver is disabled."
      },
      {
        "number": "14",
        "name": "RIN+",
        "type": "input",
        "description": "Non-inverting receiver input pin; each LVDS input operates over 0V to +2.4V measured from each pin to ground, and the receiver detects signals as low as 100 mV over a ±1V common-mode range centered around +1.2V."
      },
      {
        "number": "15",
        "name": "RIN−",
        "type": "input",
        "description": "Inverting receiver input pin; each LVDS input operates over 0V to +2.4V measured from each pin to ground, and unused receiver inputs must be left open rather than tied to ground or any other voltage."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply pin, +5V ± 10% (recommended supply range +4.5 V to +5.5 V)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives ROUT as a receiver output with a TRI-STATE function but does not explicitly clas; The pin table does not name channels, so each RIN+/RIN− pin is listed with the plain name from the d; The package addendum lists DS90C032BTM as NRND (Not recommended for new designs), and the DS90C032BT"
        ],
        "pages_sent": 17,
        "cost_usd": 0.0609,
        "at": "2026-10-30T22:56:42"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ds90c032btm.pdf",
        "pages": 17,
        "sha256": "b0972de640159839",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ds90c032btm.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ds90c032btm-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "9e2a672d70f88a7564c40092b0d65db3be1454e19bcfc006416d577e1de9bb87",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "D",
      "E1": {
        "nom_mm": 3.9,
        "range_mm": null
      },
      "E": {
        "nom_mm": 6,
        "range_mm": null
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": null
      },
      "source": "TI package designator D (no drawing in the datasheet)",
      "model_check": {
        "file": "ds90c032btm.step",
        "verdict": "SKIP",
        "reasons": [
          "the datasheet dimensions give no height or body size to compare"
        ],
        "by": "factory/package_fit.py"
      }
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SOIC-16",
      "Category": "Interface ICs",
      "Pins": "16"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "b0972de6401598391082be3e38b226c511c033a38336284da1e4495c9161152e",
      "rows": [
        {
          "name": "Differential Input High Threshold",
          "symbol": "VTH",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "VCM = +1.2V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Differential Input Low Threshold",
          "symbol": "VTL",
          "kind": "electrical",
          "unit": "mV",
          "min": -100,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Input Current (RIN+/RIN-)",
          "symbol": "IIN",
          "kind": "electrical",
          "unit": "μA",
          "min": -10,
          "typ": 1,
          "max": 10,
          "conditions": "VCC = 5.5V or 0V, VIN = +2.4V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Output High Voltage",
          "symbol": "VOH",
          "kind": "electrical",
          "unit": "V",
          "min": 3.8,
          "typ": 4.9,
          "max": null,
          "conditions": "IOH = −0.4 mA, VID = +200 mV",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Output High Voltage (input terminated)",
          "symbol": "VOH",
          "kind": "electrical",
          "unit": "V",
          "min": 3.8,
          "typ": 4.9,
          "max": null,
          "conditions": "IOH = −0.4 mA, Input terminated",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Output Low Voltage",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 0.07,
          "max": 0.3,
          "conditions": "IOL = 2 mA, VID = −200 mV",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Output Short Circuit Current",
          "symbol": "IOS",
          "kind": "electrical",
          "unit": "mA",
          "min": -15,
          "typ": -60,
          "max": -100,
          "conditions": "Enabled, VOUT = 0V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Output TRI-STATE Current",
          "symbol": "IOZ",
          "kind": "electrical",
          "unit": "μA",
          "min": -10,
          "typ": 1,
          "max": 10,
          "conditions": "Disabled, VOUT = 0V or VCC",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Input High Voltage (EN, EN*)",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "V",
          "min": 2,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Input Low Voltage (EN, EN*)",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.8,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Input Current (EN, EN*)",
          "symbol": "II",
          "kind": "electrical",
          "unit": "μA",
          "min": -10,
          "typ": 1,
          "max": 10,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Input Clamp Voltage",
          "symbol": "VCL",
          "kind": "electrical",
          "unit": "V",
          "min": -1.5,
          "typ": null,
          "max": -0.8,
          "conditions": "ICL = −18 mA",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "No Load Supply Current, Receivers Enabled",
          "symbol": "ICC",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 3.5,
          "max": 10,
          "conditions": "EN, EN* = VCC or GND, Inputs Open",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "No Load Supply Current, Receivers Enabled",
          "symbol": "ICC",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 3.7,
          "max": 11,
          "conditions": "EN, EN* = 2.4 or 0.5, Inputs Open",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "No Load Supply Current, Receivers Disabled",
          "symbol": "ICCZ",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 3.5,
          "max": 10,
          "conditions": "EN = GND, EN* = VCC, Inputs Open",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Differential Propagation Delay High to Low",
          "symbol": "tPHLD",
          "kind": "timing",
          "unit": "ns",
          "min": 1.5,
          "typ": 3.4,
          "max": 5,
          "conditions": "VCC = +5.0V, TA = +25°C; CL = 5 pF, VID = 200 mV",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Differential Propagation Delay Low to High",
          "symbol": "tPLHD",
          "kind": "timing",
          "unit": "ns",
          "min": 1.5,
          "typ": 3.48,
          "max": 5,
          "conditions": "VCC = +5.0V, TA = +25°C; CL = 5 pF, VID = 200 mV",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Differential Skew |tPHLD − tPLHD|",
          "symbol": "tSKD",
          "kind": "timing",
          "unit": "ps",
          "min": 0,
          "typ": 80,
          "max": 600,
          "conditions": "VCC = +5.0V, TA = +25°C; CL = 5 pF, VID = 200 mV",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Channel-to-Channel Skew",
          "symbol": "tSK1",
          "kind": "timing",
          "unit": "ns",
          "min": 0,
          "typ": 0.6,
          "max": 1,
          "conditions": "VCC = +5.0V, TA = +25°C; CL = 5 pF, VID = 200 mV",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Rise Time",
          "symbol": "tTLH",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 0.5,
          "max": 2,
          "conditions": "VCC = +5.0V, TA = +25°C; CL = 5 pF, VID = 200 mV",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Fall Time",
          "symbol": "tTHL",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 0.5,
          "max": 2,
          "conditions": "VCC = +5.0V, TA = +25°C; CL = 5 pF, VID = 200 mV",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Disable Time High to Z",
          "symbol": "tPHZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 10,
          "max": 15,
          "conditions": "VCC = +5.0V, TA = +25°C; RL = 2 kΩ, CL = 10 pF",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Disable Time Low to Z",
          "symbol": "tPLZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 10,
          "max": 15,
          "conditions": "VCC = +5.0V, TA = +25°C; RL = 2 kΩ, CL = 10 pF",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Enable Time Z to High",
          "symbol": "tPZH",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 4,
          "max": 10,
          "conditions": "VCC = +5.0V, TA = +25°C; RL = 2 kΩ, CL = 10 pF",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Enable Time Z to Low",
          "symbol": "tPZL",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 4,
          "max": 10,
          "conditions": "VCC = +5.0V, TA = +25°C; RL = 2 kΩ, CL = 10 pF",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Differential Propagation Delay High to Low",
          "symbol": "tPHLD",
          "kind": "timing",
          "unit": "ns",
          "min": 1,
          "typ": 3.4,
          "max": 6,
          "conditions": "VCC = +5.0V ± 10%, TA = −40°C to +85°C; CL = 5 pF, VID = 200 mV",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Differential Propagation Delay Low to High",
          "symbol": "tPLHD",
          "kind": "timing",
          "unit": "ns",
          "min": 1,
          "typ": 3.48,
          "max": 6,
          "conditions": "VCC = +5.0V ± 10%, TA = −40°C to +85°C; CL = 5 pF, VID = 200 mV",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Differential Skew |tPHLD − tPLHD|",
          "symbol": "tSKD",
          "kind": "timing",
          "unit": "ns",
          "min": 0,
          "typ": 0.08,
          "max": 1.2,
          "conditions": "VCC = +5.0V ± 10%, TA = −40°C to +85°C; CL = 5 pF, VID = 200 mV",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Channel-to-Channel Skew",
          "symbol": "tSK1",
          "kind": "timing",
          "unit": "ns",
          "min": 0,
          "typ": 0.6,
          "max": 1.5,
          "conditions": "VCC = +5.0V ± 10%, TA = −40°C to +85°C; CL = 5 pF, VID = 200 mV",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Chip to Chip Skew",
          "symbol": "tSK2",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 5,
          "conditions": "VCC = +5.0V ± 10%, TA = −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Rise Time",
          "symbol": "tTLH",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 0.5,
          "max": 2.5,
          "conditions": "VCC = +5.0V ± 10%, TA = −40°C to +85°C; CL = 5 pF, VID = 200 mV",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Fall Time",
          "symbol": "tTHL",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 0.5,
          "max": 2.5,
          "conditions": "VCC = +5.0V ± 10%, TA = −40°C to +85°C; CL = 5 pF, VID = 200 mV",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Disable Time High to Z",
          "symbol": "tPHZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 10,
          "max": 20,
          "conditions": "VCC = +5.0V ± 10%, TA = −40°C to +85°C; RL = 2 kΩ, CL = 10 pF",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Disable Time Low to Z",
          "symbol": "tPLZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 10,
          "max": 20,
          "conditions": "VCC = +5.0V ± 10%, TA = −40°C to +85°C; RL = 2 kΩ, CL = 10 pF",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Enable Time Z to High",
          "symbol": "tPZH",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 4,
          "max": 15,
          "conditions": "VCC = +5.0V ± 10%, TA = −40°C to +85°C; RL = 2 kΩ, CL = 10 pF",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Enable Time Z to Low",
          "symbol": "tPZL",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 4,
          "max": 15,
          "conditions": "VCC = +5.0V ± 10%, TA = −40°C to +85°C; RL = 2 kΩ, CL = 10 pF",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Supply Voltage (VCC)",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 4.5,
          "typ": 5,
          "max": 5.5,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Receiver Input Voltage",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 2.4,
          "conditions": "Minimum printed as GND",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Operating Free Air Temperature",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": 25,
          "max": 85,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Supply Voltage (VCC)",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 6,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Input Voltage (RIN+, RIN−)",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 5.8,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Enable Input Voltage (EN, EN*)",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "Maximum printed as (VCC + 0.3V)",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Output Voltage (ROUT)",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "Maximum printed as (VCC + 0.3V)",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Maximum Package Power Dissipation",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mW",
          "min": null,
          "typ": null,
          "max": 1025,
          "conditions": "at +25°C",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Derate Power Dissipation",
          "symbol": "",
          "kind": "thermal",
          "unit": "mW/°C",
          "min": null,
          "typ": null,
          "max": 8.2,
          "conditions": "above +25°C",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Storage Temperature Range",
          "symbol": "Tstg",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Maximum Lead Temperature, Soldering",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 260,
          "conditions": "4 seconds",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Maximum Junction Temperature",
          "symbol": "TJ",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "ESD HBM",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "kV",
          "min": 2,
          "typ": null,
          "max": null,
          "conditions": "HBM, 1.5 kΩ, 100 pF",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "ESD EIAJ",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": 250,
          "typ": null,
          "max": null,
          "conditions": "EIAJ, 0 Ω, 200 pF",
          "source_page": 2,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ds90c032btm"
  ],
  "discovery_pitch": "DS90C032BTM (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ds90c032btm.kicad_sym",
    "ds90c032btm.kicad_mod",
    "ds90c032btm.glb",
    "ds90c032btm.step",
    "ds90c032btm.lbr",
    "docs/hero.png",
    "docs/ds90c032btm-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ds90c032btm-hero.glb",
    "ds90c032btm-hero.overlay.json",
    "ds90c032btm-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}