component
DS90C032BTM
Public Made by Adomby adom
Texas Instruments Pre-ordered Chips, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268
{
"slug": "ds90c032btm",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Pre-ordered Chips, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface ics",
"ds90c032btm",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ds90c032btm.kicad_sym",
"ds90c032btm.kicad_mod",
"ds90c032btm.glb",
"ds90c032btm.step",
"ds90c032btm.lbr",
"docs/hero.png",
"docs/ds90c032btm-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ds90c032btm-hero.glb",
"ds90c032btm-hero.overlay.json",
"ds90c032btm-etched.glb"
],
"component": {
"mpn": "DS90C032BTM",
"manufacturer": "Texas Instruments",
"package": "SOIC-16",
"pin_count": 16,
"category": "Interface ICs",
"subcategory": "Pre-ordered Chips",
"datasheet": "https://www.ti.com/lit/ds/symlink/ds90c032btm.pdf",
"parts": {
"symbol": "ds90c032btm.kicad_sym",
"footprint": "ds90c032btm.kicad_mod",
"model_3d": "ds90c032btm-hero.glb",
"model_3d_plain": "ds90c032btm-etched.glb",
"model_3d_step": "ds90c032btm-etched.step",
"model_3d_step_plain": "ds90c032btm.step",
"lbr": "ds90c032btm.lbr"
},
"distributor_links": {
"lcsc": "C1544100",
"digikey": "DS90C032BTM-ND",
"mouser": "926-DS90C032BTM"
},
"distributor_check": {
"checked_at": "2026-10-30T22:56:59Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "DS90C032BTM-ND",
"status": "found",
"lifecycle": "Obsolete"
},
"mouser": {
"pn": "926-DS90C032BTM",
"status": "found",
"lifecycle": "Obsolete"
}
},
"pins": [
{
"number": "1",
"name": "RIN−",
"type": "input",
"description": "Inverting receiver input pin; each LVDS input operates over 0V to +2.4V measured from each pin to ground, and unused receiver inputs must be left open rather than tied to ground or any other voltage."
},
{
"number": "2",
"name": "RIN+",
"type": "input",
"description": "Non-inverting receiver input pin; each LVDS input operates over 0V to +2.4V measured from each pin to ground, and the receiver detects signals as low as 100 mV over a ±1V common-mode range centered around +1.2V."
},
{
"number": "3",
"name": "ROUT",
"type": "tri_state",
"description": "Receiver CMOS (TTL compatible) output that goes HIGH for both failsafe conditions and is in TRI-STATE when the receiver is disabled."
},
{
"number": "4",
"name": "EN",
"type": "input",
"description": "Active high enable pin, OR-ed with EN*; the receiver is disabled (output Z) when EN is low and EN* is high."
},
{
"number": "5",
"name": "ROUT",
"type": "tri_state",
"description": "Receiver CMOS (TTL compatible) output that goes HIGH for both failsafe conditions and is in TRI-STATE when the receiver is disabled."
},
{
"number": "6",
"name": "RIN+",
"type": "input",
"description": "Non-inverting receiver input pin; each LVDS input operates over 0V to +2.4V measured from each pin to ground, and the receiver detects signals as low as 100 mV over a ±1V common-mode range centered around +1.2V."
},
{
"number": "7",
"name": "RIN−",
"type": "input",
"description": "Inverting receiver input pin; each LVDS input operates over 0V to +2.4V measured from each pin to ground, and unused receiver inputs must be left open rather than tied to ground or any other voltage."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "Ground pin for the device."
},
{
"number": "9",
"name": "RIN−",
"type": "input",
"description": "Inverting receiver input pin; each LVDS input operates over 0V to +2.4V measured from each pin to ground, and unused receiver inputs must be left open rather than tied to ground or any other voltage."
},
{
"number": "10",
"name": "RIN+",
"type": "input",
"description": "Non-inverting receiver input pin; each LVDS input operates over 0V to +2.4V measured from each pin to ground, and the receiver detects signals as low as 100 mV over a ±1V common-mode range centered around +1.2V."
},
{
"number": "11",
"name": "ROUT",
"type": "tri_state",
"description": "Receiver CMOS (TTL compatible) output that goes HIGH for both failsafe conditions and is in TRI-STATE when the receiver is disabled."
},
{
"number": "12",
"name": "EN*",
"type": "input",
"description": "Active low enable pin, OR-ed with EN; the receiver is disabled (output Z) when EN* is high and EN is low."
},
{
"number": "13",
"name": "ROUT",
"type": "tri_state",
"description": "Receiver CMOS (TTL compatible) output that goes HIGH for both failsafe conditions and is in TRI-STATE when the receiver is disabled."
},
{
"number": "14",
"name": "RIN+",
"type": "input",
"description": "Non-inverting receiver input pin; each LVDS input operates over 0V to +2.4V measured from each pin to ground, and the receiver detects signals as low as 100 mV over a ±1V common-mode range centered around +1.2V."
},
{
"number": "15",
"name": "RIN−",
"type": "input",
"description": "Inverting receiver input pin; each LVDS input operates over 0V to +2.4V measured from each pin to ground, and unused receiver inputs must be left open rather than tied to ground or any other voltage."
},
{
"number": "16",
"name": "VCC",
"type": "power_in",
"description": "Power supply pin, +5V ± 10% (recommended supply range +4.5 V to +5.5 V)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet gives ROUT as a receiver output with a TRI-STATE function but does not explicitly clas; The pin table does not name channels, so each RIN+/RIN− pin is listed with the plain name from the d; The package addendum lists DS90C032BTM as NRND (Not recommended for new designs), and the DS90C032BT"
],
"pages_sent": 17,
"cost_usd": 0.0609,
"at": "2026-10-30T22:56:42"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/ds90c032btm.pdf",
"pages": 17,
"sha256": "b0972de640159839",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ds90c032btm.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
9.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ds90c032btm-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
9.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "9e2a672d70f88a7564c40092b0d65db3be1454e19bcfc006416d577e1de9bb87",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "D",
"E1": {
"nom_mm": 3.9,
"range_mm": null
},
"E": {
"nom_mm": 6.0,
"range_mm": null
},
"e": {
"nom_mm": 1.27,
"range_mm": null
},
"source": "TI package designator D (no drawing in the datasheet)",
"model_check": {
"file": "ds90c032btm.step",
"verdict": "SKIP",
"reasons": [
"the datasheet dimensions give no height or body size to compare"
],
"by": "factory/package_fit.py"
}
}
}
}