component
DS8607-50A3
Public Made by Adomby adom
DSTECH Linear Voltage Regulators (LDO), SOT-89-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownDS8607-50A3
DSTECH · Linear Voltage Regulators (LDO) · SOT-89-3
DS8607-50A3 from DSTECH, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin; the input and output capacitor ground connections must return to this pin with short, wide traces. |
| 2 | VIN | power_in | Power input port; the datasheet specifies an input voltage range of 2V to 55V and recommends at least 1uF input capacitance placed close to VIN and GND. |
| 3 | VOUT | power_out | Power output port for the fixed output voltage; dropout is 0.66V at VOUT of 5V and ILOAD of 100mA, and the current limit is 300mA typical. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | DSTECH |
| Package | SOT-89-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 2 | 55 | V | 5 | ||
| Input voltage (recommended operating) | VIN | 2 | 55 | V | 4 | ||
| Output voltage accuracy | -1 | 1 | % | ILOAD =0.1mA | 5 | ||
| Dropout voltage | VDROP | 0.66 | V | ILOAD=100mA, VOUT >= 5V | 5 | ||
| Quiescent current | IQ | 2.2 | μA | ILOAD = 0mA, VOUT <= 5V | 5 | ||
| Input voltage regulation | ΔLINE | 0.3 | % | ILOAD =1mA, 5 <= VIN <= 55V | 5 | ||
| Load voltage regulation | ΔLOAD | 0.1 | % | 1mA <= ILOAD <= 0.2A | 5 | ||
| Output current limit | ILIM | 201 | 300 | mA | VOUT =0 | 5 | |
| Power supply rejection ratio | PSRR | 70 | dB | VOUT =5V, ILOAD =1mA, VIN = 12V, f = 100Hz | 5 | ||
| Over-temperature shutdown temperature | TSD | 160 | °C | ILOAD =10mA | 5 | ||
| Over-temperature shutdown hysteresis | ΔTSD | 15 | °C | 5 | |||
| VIN to GND voltage | VIN | -0.3 | 60 | V | VIN to GND | 4 | |
| VOUT to GND voltage | VOUT | -0.3 | 14 | V | VOUT to GND | 4 | |
| VOUT to VIN voltage | VOUT | -60 | 0.3 | V | VOUT to VIN | 4 | |
| Thermal resistance junction to ambient | θJA | 120 | °C/W | SOT-89-3, TA = 25°C, DSTECH EVB board | 4 | ||
| Junction temperature | 150 | °C | 4 | ||||
| Soldering temperature | 260 | °C | Soldering, 10 sec. | 4 | |||
| Storage temperature range | -60 | 150 | °C | 4 | |||
| ESD HBM | 2 | KV | HBM | 4 | |||
| ESD MM | 200 | V | MM | 4 | |||
| Application junction temperature range | -40 | 125 | °C | 4 | |||
| Application ambient temperature range | -40 | 85 | °C | 4 |
CAD (KiCad official)
- Symbol:
DS8607-50A3 - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files:
ds8607-50a3-etched.step/ds8607-50a3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ds8607-50a3.step/ds8607-50a3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: DSTECH datasheet (9 pp, sha256
a2ced40246d0d903, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).