component
DS8571-28S5
Public Made by Adomby adom
DSTECH Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
DS8571-28S5
DSTECH · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
DS8571-28S5 from DSTECH, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input of supply voltage, operating range 2.3V to 6V, with absolute maximum VIN to GND of 7V; place at least a 1µF input capacitor close to this pin and GND. |
| 2 | GND | power_in | Ground reference for the regulator; the input and output capacitor grounds must return to this pin through a short, wide trace. |
| 3 | EN | input | Enable control input that shuts the regulator down when pulled low (VIL 0.4V falling, VIH 1.0V rising, 6V absolute maximum to GND), with shutdown ground current of 0.1µA typical. |
| 4 | NC | unconnected | No internal connection on this package variant. |
| 5 | VOUT | power_out | Output of the regulator, 300mA maximum output current, stable with a 1µF to 22µF ceramic or tantalum output capacitor with at least 1mΩ ESR, placed close to VOUT and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | DSTECH |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VIN | 2.3 | 6 | V | 7 | ||
| DC Output Voltage Accuracy | -2 | 2 | % | ILOAD =0.1mA | 7 | ||
| Output Current Limit | ILIM | 301 | 550 | mA | VOUT = 0V | 7 | |
| Input Voltage (recommended operating) | VIN | 2.3 | 6 | V | 6 | ||
| Junction Temperature Range | TJ | -40 | 125 | oC | 6 | ||
| Ambient Temperature Range | TA | -40 | 85 | oC | 6 | ||
| VIN to GND | VIN | -0.3 | 7 | V | 6 | ||
| VOUT, EN to GND | VOUT, EN | -0.3 | 6 | V | 6 | ||
| VOUT to VIN | VOUT-VIN | -6 | 0.3 | V | 6 | ||
| Lead Temperature (Soldering, 10 sec.) | 260 | oC | Soldering, 10 sec | 6 | |||
| Junction Temperature | TJ | 150 | oC | 6 | |||
| Storage Temperature Range | TSTG | -60 | 150 | oC | 6 | ||
| ESD Susceptibility MM | MM | 200 | V | 6 | |||
| Package Thermal Resistance SOT-23-5 / SOT-23-3 | θJA | 220 | oC/W | TA=25°C, DSTECH EVB board (Note 2) | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | must be back to the DS8571 ground pin using as wide and as short of a copper trace as is practical. | 12 |
CAD (KiCad official)
- Symbol:
DS8571-28S5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ds8571-28s5-etched.step/ds8571-28s5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ds8571-28s5.step/ds8571-28s5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: DSTECH datasheet (18 pp, sha256
481282d70f89eeec, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# DS8571-28S5
**DSTECH** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
DS8571-28S5 from DSTECH, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input of supply voltage, operating range 2.3V to 6V, with absolute maximum VIN to GND of 7V; place at least a 1µF input capacitor close to this pin and GND. |
| 2 | GND | power_in | Ground reference for the regulator; the input and output capacitor grounds must return to this pin through a short, wide trace. |
| 3 | EN | input | Enable control input that shuts the regulator down when pulled low (VIL 0.4V falling, VIH 1.0V rising, 6V absolute maximum to GND), with shutdown ground current of 0.1µA typical. |
| 4 | NC | unconnected | No internal connection on this package variant. |
| 5 | VOUT | power_out | Output of the regulator, 300mA maximum output current, stable with a 1µF to 22µF ceramic or tantalum output capacitor with at least 1mΩ ESR, placed close to VOUT and GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | DSTECH |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VIN | 2.3 | | 6 | V | | 7 |
| DC Output Voltage Accuracy | | -2 | | 2 | % | ILOAD =0.1mA | 7 |
| Output Current Limit | ILIM | 301 | 550 | | mA | VOUT = 0V | 7 |
| Input Voltage (recommended operating) | VIN | 2.3 | | 6 | V | | 6 |
| Junction Temperature Range | TJ | -40 | | 125 | oC | | 6 |
| Ambient Temperature Range | TA | -40 | | 85 | oC | | 6 |
| VIN to GND | VIN | -0.3 | | 7 | V | | 6 |
| VOUT, EN to GND | VOUT, EN | -0.3 | | 6 | V | | 6 |
| VOUT to VIN | VOUT-VIN | -6 | | 0.3 | V | | 6 |
| Lead Temperature (Soldering, 10 sec.) | | | | 260 | oC | Soldering, 10 sec | 6 |
| Junction Temperature | TJ | | | 150 | oC | | 6 |
| Storage Temperature Range | TSTG | -60 | | 150 | oC | | 6 |
| ESD Susceptibility MM | MM | | | 200 | V | | 6 |
| Package Thermal Resistance SOT-23-5 / SOT-23-3 | θJA | | 220 | | oC/W | TA=25°C, DSTECH EVB board (Note 2) | 6 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | must be back to the DS8571 ground pin using as wide and as short of a copper trace as is practical. | 12 |
## CAD (KiCad official)
- Symbol: `DS8571-28S5`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `ds8571-28s5-etched.step` / `ds8571-28s5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ds8571-28s5.step` / `ds8571-28s5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [DSTECH datasheet](docs/ds8571-28s5-datasheet.pdf) (18 pp, sha256 `481282d70f89eeec`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ds8571-28s5-datasheet.pdf)