component
DS8562-30S5
Public Made by Adomby adom
DSTECH Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownDS8562-30S5
DSTECH · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT23-5
DS8562-30S5 from DSTECH, in a SOT23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply voltage for the regulator, specified from 1.2V to 6V with absolute maximum VIN to GND of -0.3V to 7V. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | EN | input | Enable control input: pulling it low (VIL 0.4V max) shuts the device down with about 100nA typical shutdown current, and it must be above VIH 1.0V to enable; absolute maximum voltage on EN to GND is -0.3V to 6V. |
| 4 | NC | unconnected | No internal connection. |
| 5 | VOUT | power_out | Regulated output of the LDO, rated for up to 600mA load current and needing a 1µF to 22µF output capacitor with at least 1mΩ ESR. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | DSTECH |
| Package | SOT23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
DS8562-30S5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT23-5 (KiCad packages3D, STEP)
- 3D model files:
ds8562-30s5-etched.step/ds8562-30s5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ds8562-30s5.step/ds8562-30s5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: DSTECH datasheet (17 pp, sha256
ac758b289bdea453, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).