component
DS36C200MX
Public Made by Adomby adom
Texas Instruments Interface - Specialized, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownDS36C200MX
Texas Instruments · Interface - Specialized · SOIC-14
DS36C200MX from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DI/RO | bidirectional | Serves as the TTL/CMOS driver input (DI) in transmit mode and the receiver output (RO) in receive mode, with the mode selected by DE and RE*. |
| 2 | VCC | power_in | Positive power supply pin, +5 V ±10%; recommended supply range is 4.5 V to 5.5 V. |
| 3 | DE | input | Transmit driver enable: the driver is disabled when driven low and enabled when driven high, and DE should be routed together with RE* so the driver and receiver are never enabled at the same time. |
| 4 | RE* | input | Receiver enable, active low: the receiver is enabled when driven low and disabled when driven high. |
| 5 | GND | power_in | Ground pin for the device, used as the transmit and ground reference; all voltages are referenced to ground except VOD and VID. |
| 6 | NC | unconnected | No connect pin. |
| 7 | DI/RO | bidirectional | Serves as the TTL/CMOS driver input (DI) in transmit mode and the receiver output (RO) in receive mode, with the mode selected by DE and RE*. |
| 8 | NC | unconnected | No connect pin. |
| 9 | NC | unconnected | No connect pin. |
| 10 | DO+/RI+ | bidirectional | Acts as the non-inverting driver output (DO+) in transmit mode, which drives a 55 Ω load at VOD of 172 mV to 285 mV, and as the positive receiver input (RI+) in receive mode. |
| 11 | DO-/RI- | bidirectional | Acts as the inverting driver output (DO-) in transmit mode and as the negative receiver input (RI-) in receive mode. |
| 12 | DO-/RI- | bidirectional | Acts as the inverting driver output (DO-) in transmit mode and as the negative receiver input (RI-) in receive mode. |
| 13 | DO+/RI+ | bidirectional | Acts as the non-inverting driver output (DO+) in transmit mode, which drives a 55 Ω load at VOD of 172 mV to 285 mV, and as the positive receiver input (RI+) in receive mode. |
| 14 | NC | unconnected | No connect pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Interface |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
DS36C200MX - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
ds36c200mx-etched.step/ds36c200mx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ds36c200mx.step/ds36c200mx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (19 pp, sha256
6095107cb9abb7f9, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).