DS3232MZ+TRL

{
  "slug": "ds3232mz-trl",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Inc Maxim Integrated Real Time Clocks, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "clock-timing",
    "ds3232mz+trl",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ds3232mz-trl.kicad_sym",
    "ds3232mz-trl.kicad_mod",
    "ds3232mz-trl.glb",
    "ds3232mz-trl.step",
    "ds3232mz-trl.lbr",
    "docs/hero.png",
    "docs/ds3232mz-trl-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ds3232mz-trl-hero.glb",
    "ds3232mz-trl-hero.overlay.json",
    "ds3232mz-trl-etched.glb"
  ],
  "component": {
    "mpn": "DS3232MZ+TRL",
    "manufacturer": "Analog Devices Inc Maxim Integrated",
    "package": "SO-8",
    "pin_count": 8,
    "category": "Clock/Timing",
    "subcategory": "Real Time Clocks",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590184546961690624",
    "parts": {
      "symbol": "ds3232mz-trl.kicad_sym",
      "footprint": "ds3232mz-trl.kicad_mod",
      "model_3d": "ds3232mz-trl-hero.glb",
      "model_3d_plain": "ds3232mz-trl-etched.glb",
      "model_3d_step": "ds3232mz-trl-etched.step",
      "model_3d_step_plain": "ds3232mz-trl.step",
      "lbr": "ds3232mz-trl.lbr"
    },
    "distributor_links": {
      "lcsc": "C2827535"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T21:24:55Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "32KHZ",
        "type": "output",
        "description": "32.768kHz push-pull output with 50% duty cycle, active on VCC when EN32KHZ = 1 and on VBAT when BB32KHZ = 1, forced low when disabled, and may be left unconnected if not used."
      },
      {
        "number": "2",
        "name": "VCC",
        "type": "power_in",
        "description": "Primary power supply pin that should be decoupled using a 0.1µF to 1.0µF capacitor, and connected to ground if not used."
      },
      {
        "number": "3",
        "name": "INT/SQW",
        "type": "output",
        "description": "Open-drain active-low interrupt or 1Hz square-wave output that requires an external pullup to a supply of 4.5V or less and may be left open if not used."
      },
      {
        "number": "4",
        "name": "RST",
        "type": "bidirectional",
        "description": "Open-drain active-low reset input/output that indicates VCC status relative to VPF and doubles as a debounced pushbutton input, with an internal 50kΩ nominal pullup to VCC, so no external pullup should be connected."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "6",
        "name": "VBAT",
        "type": "power_in",
        "description": "Backup power-supply input that should be decoupled with a 0.1µF to 1.0µF low-leakage capacitor when used as the primary source, is not required when used as backup, and should be connected to ground if not used."
      },
      {
        "number": "7",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Open-drain I2C serial data input/output that requires an external pullup resistor, with the pullup voltage up to 4.5V regardless of the voltage on VCC."
      },
      {
        "number": "8",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial clock input that synchronizes data movement on the serial interface, with the pullup voltage up to 4.5V regardless of the voltage on VCC."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN suffix 'TRL' (tape-and-reel packaging) does not appear in the supplied datasheet. The Orderi; The datasheet describes INT/SQW and RST as open-drain without an explicit KiCad class. INT/SQW was m"
        ],
        "pages_sent": 6,
        "cost_usd": 0.0374,
        "at": "2026-10-18T21:24:40"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590184546961690624",
        "pages": 23,
        "sha256": "50daf411ed74bd83",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ds3232mz-trl.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ds3232mz-trl-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "df3b6d854170ee536fe616f73611381198d0c7d78c6668108bc9108ae1bca50e",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}