component
DS18B20-MS
Public Made by Adomby adom
MSKSEMI Temperature Sensors, TO-92. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
DS18B20-MS
MSKSEMI · Temperature Sensors · TO-92
DS18B20-MS from MSKSEMI, in a TO-92. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin for the DS18B20 (TO-92 pin 1, 1-Wire bus and supply return). |
| 2 | DQ | bidirectional | Data input/output pin of the 1-Wire bus; it needs an external pull-up (about 4.7 kΩ to 5 kΩ shown in the datasheet) and also powers the chip in parasitic mode, where a strong pull-up is required during temperature conversion and EEPROM copy. |
| 3 | VDD | power_in | Supply pin, 2.5 V to 5.5 V in local-supply mode; it must be connected to GND when the device runs in parasitic power mode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | TO-92 |
| Category | Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 各引脚对地电压范围 | -0.5 | 6 | V | 各引脚对地的电压范围 | 20 | ||
| 工作温度范围 | -55 | 125 | ℃ | 20 | |||
| 储存范围 | -55 | 125 | ℃ | 20 | |||
| 供电电压 | VDD | 2.5 | 5.5 | V | 局部供电 | 20 | |
| 上拉供电电压 (寄生供电) | VPU | 2.5 | 5.5 | V | 寄生供电 | 20 | |
| 上拉供电电压 (局部供电) | VPU | 2.5 | V | 局部供电 | 20 | ||
| 输入逻辑低电平 | VIL | -0.3 | 0.8 | V | 20 | ||
| 输入逻辑高电平 (局部供电) | VIH | 2.2 | 5.5 | V | 局部供电 | 20 | |
| 输入逻辑高电平 (寄生供电) | VIH | 2.5 | V | 寄生供电 | 20 | ||
| 灌电流 | IL | 4 | mA | VI/O = 0.4V | 20 | ||
| 待机电流 | IDDS | 750 | 1000 | nA | note 7: 70℃; note 8: GND ≤ DQ ≤ GND+0.3V or VDD−0.3V ≤ DQ ≤ VDD | 20 | |
| 工作电流 | IDD | 1 | 1.5 | mA | VDD = 5V | 20 | |
| 温度误差 (-10℃~+85℃) | tERR | -0.4 | 0.4 | ℃ | -10℃~+85℃ | 20 | |
| 温度误差 (-55℃~+125℃) | tERR | -1.2 | 1.2 | ℃ | -55℃~+125℃ | 20 | |
| 漂移 | -0.2 | 0.2 | ℃ | note 11: after 1000 h at +125℃, VDD = 5.5V | 20 | ||
| 温度转换时间 (9-bit) | tCONV | 50 | ms | 9-bit resolution | 21 | ||
| 温度转换时间 (10-bit) | tCONV | 100 | ms | 10-bit resolution | 21 | ||
| 温度转换时间 (11-bit) | tCONV | 200 | ms | 11-bit resolution | 21 | ||
| 温度转换时间 (12-bit) | tCONV | 400 | ms | 12-bit resolution | 21 | ||
| Time to Strong Pullup On | tSPON | 10 | µs | Start Convert T Command Issued | 21 | ||
| Time Slot | tSLOT | 60 | 120 | µs | 21 | ||
| Recovery Time | tREC | 1 | µs | 21 | |||
| Write 0 Low Time | tLOW0 | 60 | 120 | µs | 21 | ||
| Write 1 Low Time | tLOW1 | 1 | 15 | µs | 21 | ||
| Read Data Valid | tRDV | 15 | µs | 21 | |||
| Reset Time High | tRSTH | 480 | µs | 21 | |||
| Presence-Detect High | tPDHIGH | 15 | 60 | µs | 21 | ||
| Presence-Detect Low | tPDLOW | 60 | 240 | µs | 21 | ||
| NV Write Cycle Time | tWR | 8 | 12 | ms | 21 | ||
| EEPROM Writes | NEEWR | 1000 | writes | -55°C to +55°C | 21 | ||
| EEPROM Data Retention | tEEDR | 10 | years | -55°C to +55°C | 21 |
CAD (KiCad official)
- Symbol:
DS18B20-MS - Footprint:
Package_TO_SOT_THT:TO-92_Inline - 3D model: TO-92 (KiCad packages3D, STEP)
- 3D model files:
ds18b20-ms-etched.step/ds18b20-ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ds18b20-ms.step/ds18b20-ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (27 pp, sha256
e6f402932e96c15e, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# DS18B20-MS
**MSKSEMI** · Temperature Sensors · TO-92
DS18B20-MS from MSKSEMI, in a TO-92. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin for the DS18B20 (TO-92 pin 1, 1-Wire bus and supply return). |
| 2 | DQ | bidirectional | Data input/output pin of the 1-Wire bus; it needs an external pull-up (about 4.7 kΩ to 5 kΩ shown in the datasheet) and also powers the chip in parasitic mode, where a strong pull-up is required during temperature conversion and EEPROM copy. |
| 3 | VDD | power_in | Supply pin, 2.5 V to 5.5 V in local-supply mode; it must be connected to GND when the device runs in parasitic power mode. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | TO-92 |
| Category | Sensors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 各引脚对地电压范围 | | -0.5 | | 6 | V | 各引脚对地的电压范围 | 20 |
| 工作温度范围 | | -55 | | 125 | ℃ | | 20 |
| 储存范围 | | -55 | | 125 | ℃ | | 20 |
| 供电电压 | VDD | 2.5 | | 5.5 | V | 局部供电 | 20 |
| 上拉供电电压 (寄生供电) | VPU | 2.5 | | 5.5 | V | 寄生供电 | 20 |
| 上拉供电电压 (局部供电) | VPU | 2.5 | | | V | 局部供电 | 20 |
| 输入逻辑低电平 | VIL | -0.3 | | 0.8 | V | | 20 |
| 输入逻辑高电平 (局部供电) | VIH | 2.2 | | 5.5 | V | 局部供电 | 20 |
| 输入逻辑高电平 (寄生供电) | VIH | 2.5 | | | V | 寄生供电 | 20 |
| 灌电流 | IL | 4 | | | mA | VI/O = 0.4V | 20 |
| 待机电流 | IDDS | | 750 | 1000 | nA | note 7: 70℃; note 8: GND ≤ DQ ≤ GND+0.3V or VDD−0.3V ≤ DQ ≤ VDD | 20 |
| 工作电流 | IDD | | 1 | 1.5 | mA | VDD = 5V | 20 |
| 温度误差 (-10℃~+85℃) | tERR | -0.4 | | 0.4 | ℃ | -10℃~+85℃ | 20 |
| 温度误差 (-55℃~+125℃) | tERR | -1.2 | | 1.2 | ℃ | -55℃~+125℃ | 20 |
| 漂移 | | -0.2 | | 0.2 | ℃ | note 11: after 1000 h at +125℃, VDD = 5.5V | 20 |
| 温度转换时间 (9-bit) | tCONV | | | 50 | ms | 9-bit resolution | 21 |
| 温度转换时间 (10-bit) | tCONV | | | 100 | ms | 10-bit resolution | 21 |
| 温度转换时间 (11-bit) | tCONV | | | 200 | ms | 11-bit resolution | 21 |
| 温度转换时间 (12-bit) | tCONV | | | 400 | ms | 12-bit resolution | 21 |
| Time to Strong Pullup On | tSPON | | | 10 | µs | Start Convert T Command Issued | 21 |
| Time Slot | tSLOT | 60 | | 120 | µs | | 21 |
| Recovery Time | tREC | 1 | | | µs | | 21 |
| Write 0 Low Time | tLOW0 | 60 | | 120 | µs | | 21 |
| Write 1 Low Time | tLOW1 | 1 | | 15 | µs | | 21 |
| Read Data Valid | tRDV | | | 15 | µs | | 21 |
| Reset Time High | tRSTH | 480 | | | µs | | 21 |
| Presence-Detect High | tPDHIGH | 15 | | 60 | µs | | 21 |
| Presence-Detect Low | tPDLOW | 60 | | 240 | µs | | 21 |
| NV Write Cycle Time | tWR | | 8 | 12 | ms | | 21 |
| EEPROM Writes | NEEWR | 1000 | | | writes | -55°C to +55°C | 21 |
| EEPROM Data Retention | tEEDR | 10 | | | years | -55°C to +55°C | 21 |
## CAD (KiCad official)
- Symbol: `DS18B20-MS`
- Footprint: `Package_TO_SOT_THT:TO-92_Inline`
- 3D model: TO-92 (KiCad packages3D, STEP)
- 3D model files: `ds18b20-ms-etched.step` / `ds18b20-ms-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ds18b20-ms.step` / `ds18b20-ms.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MSKSEMI datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904450401705984) (27 pp, sha256 `e6f402932e96c15e`, retrieved 2026-10-19, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ds18b20-ms-datasheet.pdf)