DRV8932PRGER

{
  "slug": "drv8932prger",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Gate Drive ICs, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "drv8932prger",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "drv8932prger.kicad_sym",
    "drv8932prger.kicad_mod",
    "drv8932prger.glb",
    "drv8932prger.step",
    "drv8932prger.lbr",
    "docs/hero.png",
    "docs/drv8932prger-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "drv8932prger-hero.glb",
    "drv8932prger-hero.overlay.json",
    "drv8932prger-etched.glb"
  ],
  "component": {
    "mpn": "DRV8932PRGER",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-24-EP(4x4)",
    "pin_count": 25,
    "category": "Power Supply Chip",
    "subcategory": "Gate Drive ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/drv8932",
    "parts": {
      "symbol": "drv8932prger.kicad_sym",
      "footprint": "drv8932prger.kicad_mod",
      "model_3d": "drv8932prger-hero.glb",
      "model_3d_plain": "drv8932prger-etched.glb",
      "model_3d_step": "drv8932prger-etched.step",
      "model_3d_step_plain": "drv8932prger.step",
      "lbr": "drv8932prger.lbr"
    },
    "distributor_links": {
      "lcsc": "C2876703",
      "digikey": "296-DRV8932PRGERTR-ND",
      "mouser": "595-DRV8932PRGER"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T17:19:57Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-DRV8932PRGERTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-DRV8932PRGER",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VM",
        "type": "power_in",
        "description": "Power supply pin connected to the supply voltage, bypassed to PGND with two 0.01 µF ceramic capacitors (one per pin) and a bulk capacitor rated for VM."
      },
      {
        "number": "2",
        "name": "PGND",
        "type": "power_in",
        "description": "Common power ground for all four half-bridges, connected to the system ground."
      },
      {
        "number": "3",
        "name": "OUT1",
        "type": "output",
        "description": "Output of half-bridge 1."
      },
      {
        "number": "4",
        "name": "OUT2",
        "type": "output",
        "description": "Output of half-bridge 2."
      },
      {
        "number": "5",
        "name": "OUT4",
        "type": "output",
        "description": "Output of half-bridge 4."
      },
      {
        "number": "6",
        "name": "OUT3",
        "type": "output",
        "description": "Output of half-bridge 3."
      },
      {
        "number": "7",
        "name": "PGND",
        "type": "power_in",
        "description": "Common power ground for all four half-bridges, connected to the system ground."
      },
      {
        "number": "8",
        "name": "VM",
        "type": "power_in",
        "description": "Power supply pin connected to the supply voltage, bypassed to PGND with two 0.01 µF ceramic capacitors (one per pin) and a bulk capacitor rated for VM."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground, connected to the system ground."
      },
      {
        "number": "10",
        "name": "DVDD",
        "type": "power_out",
        "description": "Logic supply voltage from the internal regulator; bypass to GND with a 0.47 µF to 1 µF X7R ceramic capacitor rated 6.3 V or 10 V."
      },
      {
        "number": "11",
        "name": "nFAULT",
        "type": "output",
        "description": "Fault indication output that is pulled low during a fault; it is open-drain and requires an external pull-up resistor."
      },
      {
        "number": "12",
        "name": "VREF34",
        "type": "input",
        "description": "Reference voltage input that sets the current level of half-bridges 3 and 4."
      },
      {
        "number": "13",
        "name": "VREF12",
        "type": "input",
        "description": "Reference voltage input that sets the current level of half-bridges 1 and 2."
      },
      {
        "number": "14",
        "name": "TOFF",
        "type": "input",
        "description": "Four-level pin that sets the off-time during current chopping."
      },
      {
        "number": "15",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "16",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "17",
        "name": "IN4",
        "type": "input",
        "description": "PWM input that controls the state of half-bridge 4; internal pull-down."
      },
      {
        "number": "18",
        "name": "IN3",
        "type": "input",
        "description": "PWM input that controls the state of half-bridge 3; internal pull-down."
      },
      {
        "number": "19",
        "name": "IN2",
        "type": "input",
        "description": "PWM input that controls the state of half-bridge 2; internal pull-down."
      },
      {
        "number": "20",
        "name": "IN1",
        "type": "input",
        "description": "PWM input that controls the state of half-bridge 1; internal pull-down."
      },
      {
        "number": "21",
        "name": "nSLEEP",
        "type": "input",
        "description": "Sleep mode input: logic high enables the device, logic low puts it into low-power sleep mode; internal pull-down."
      },
      {
        "number": "22",
        "name": "CPL",
        "type": "passive",
        "description": "Charge pump negative switch node; connect a X7R 0.022 µF ceramic capacitor rated VM between CPH and CPL."
      },
      {
        "number": "23",
        "name": "CPH",
        "type": "passive",
        "description": "Charge pump switch node; connect a X7R 0.022 µF ceramic capacitor rated VM between CPH and CPL."
      },
      {
        "number": "24",
        "name": "VCP",
        "type": "output",
        "description": "Charge pump output; connect a X7R 0.22 µF 16 V ceramic capacitor between VCP and VM."
      },
      {
        "number": "25",
        "name": "PAD",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed thermal pad is unnumbered in the datasheet table (shown as '-' and labeled PAD); it is l; The datasheet labels these charge-pump pins as 'PWR'; mapped to KiCad 'passive' because they are the; The datasheet labels DVDD as 'PWR'; mapped to power_out because it is the output of the internal lin",
          "exposed pad 25 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 42,
        "cost_usd": 0.1259,
        "at": "2026-10-30T17:19:43"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/drv8932",
        "pages": 42,
        "sha256": "0c8af1781c344c22",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "drv8932prger.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "drv8932prger-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "10410814afe8062dea6effb93ca067f375ba8940730f5d2bb69400fa83fdb205",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "RGE0024B",
      "source_page": 39,
      "D": {
        "nom_mm": 4.0,
        "range_mm": [
          3.9,
          4.1
        ]
      },
      "E1": {
        "nom_mm": 4.0,
        "range_mm": [
          3.9,
          4.1
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.0,
        "range_mm": [
          null,
          1.0
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "drv8932prger.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}