DRV8836DSSR

{
  "schema_version": 1,
  "type": "component",
  "slug": "drv8836dssr",
  "title": "DRV8836DSSR",
  "brief": "Texas Instruments Stepper Motor Driver, WSON-12-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "motor driver ics",
    "drv8836dssr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "DRV8836DSSR",
    "manufacturer": "Texas Instruments",
    "package": "WSON-12-EP(2x3)",
    "pin_count": 13,
    "category": "Motor Driver ICs",
    "subcategory": "Stepper Motor Driver",
    "datasheet": "https://www.ti.com/cn/lit/gpn/drv8836",
    "parts": {
      "symbol": "drv8836dssr.kicad_sym",
      "footprint": "drv8836dssr.kicad_mod",
      "model_3d": "drv8836dssr-etched.glb",
      "model_3d_plain": "drv8836dssr.glb",
      "model_3d_step": "drv8836dssr-etched.step",
      "model_3d_step_plain": "drv8836dssr.step",
      "lbr": "drv8836dssr.lbr"
    },
    "distributor_links": {
      "lcsc": "C191002",
      "digikey": "296-30392-2-ND",
      "mouser": "595-DRV8836DSSR"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T18:55:06Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-30392-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-DRV8836DSSR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Device and motor supply, 2 V to 7 V operating range; bypass to GND with a 0.1-µF (minimum) ceramic capacitor."
      },
      {
        "number": "2",
        "name": "AOUT1",
        "type": "output",
        "description": "Bridge A output 1; connect to motor winding A, up to 1.5 A continuous per H-bridge."
      },
      {
        "number": "3",
        "name": "AOUT2",
        "type": "output",
        "description": "Bridge A output 2; connect to motor winding A, up to 1.5 A continuous per H-bridge."
      },
      {
        "number": "4",
        "name": "BOUT1",
        "type": "output",
        "description": "Bridge B output 1; connect to motor winding B, up to 1.5 A continuous per H-bridge."
      },
      {
        "number": "5",
        "name": "BOUT2",
        "type": "output",
        "description": "Bridge B output 2; connect to motor winding B, up to 1.5 A continuous per H-bridge."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground."
      },
      {
        "number": "7",
        "name": "BIN2/BENBL",
        "type": "input",
        "description": "Bridge B input 2 (logic high sets BOUT2 high in IN/IN mode) or ENABLE input (logic high enables H-bridge B in PH/EN mode); internal pulldown resistor of about 100 kΩ."
      },
      {
        "number": "8",
        "name": "BIN1/BPHASE",
        "type": "input",
        "description": "Bridge B input 1 (logic high sets BOUT1 high in IN/IN mode) or PHASE input (sets direction of H-bridge B in PH/EN mode); internal pulldown resistor of about 100 kΩ."
      },
      {
        "number": "9",
        "name": "AIN2/AENBL",
        "type": "input",
        "description": "Bridge A input 2 (logic high sets AOUT2 high in IN/IN mode) or ENABLE input (logic high enables H-bridge A in PH/EN mode); internal pulldown resistor of about 100 kΩ."
      },
      {
        "number": "10",
        "name": "AIN1/APHASE",
        "type": "input",
        "description": "Bridge A input 1 (logic high sets AOUT1 high in IN/IN mode) or PHASE input (sets direction of H-bridge A in PH/EN mode); internal pulldown resistor of about 100 kΩ."
      },
      {
        "number": "11",
        "name": "MODE",
        "type": "input",
        "description": "Input mode select: logic low selects IN/IN mode, logic high selects PH/EN mode; internal pulldown resistor of about 100 kΩ."
      },
      {
        "number": "12",
        "name": "nSLEEP",
        "type": "input",
        "description": "Sleep input: active low places the part in low-power sleep state (max 95 nA sleep supply current at 5 V); internal pulldown resistor of about 100 kΩ."
      },
      {
        "number": "13",
        "name": "GND (PPAD)",
        "type": "power_in",
        "description": "Exposed thermal pad, labeled GND (PPAD) in the pinout; must be soldered to PCB copper/ground plane for heat dissipation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 13 added from the footprint"
        ],
        "pages_sent": 21,
        "cost_usd": 0.057,
        "at": "2026-10-01T18:54:45"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/drv8836",
        "pages": 21,
        "sha256": "95bcd16e666dc6f3",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 13,
        "described": 13,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WSON-12-EP(2x3)",
      "Category": "Motor Driver ICs",
      "Pins": "13"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "drv8836dssr"
  ],
  "discovery_pitch": "DRV8836DSSR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "drv8836dssr.kicad_sym",
    "drv8836dssr.kicad_mod",
    "drv8836dssr.glb",
    "drv8836dssr.step",
    "drv8836dssr.lbr",
    "docs/hero.png",
    "docs/drv8836dssr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  }
}