component
DRV8832DGQR
Public Made by Adomby adom
Texas Instruments Brushed DC Motor Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDRV8832DGQR
Texas Instruments · Brushed DC Motor Drivers · MSOP-10-EP
DRV8832DGQR from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT2 | output | Bridge output 2 for motor winding connection, capable of delivering 0-1 A DC/RMS or peak current. |
| 2 | ISENSE | bidirectional | Current sense input/output for external sense resistor with 160-240 mV threshold to set motor current limit. |
| 3 | OUT1 | output | Bridge output 1 for motor winding connection, capable of delivering 0-1 A DC/RMS or peak current. |
| 4 | VCC | power_in | Device and motor supply voltage input from 2.75-6.8 V; bypass to ground with 0.1 μF minimum ceramic capacitor. |
| 5 | GND | power_in | Device and motor ground reference. |
| 6 | FAULTn | tri_state | Open-drain fault output driven low upon overcurrent (1.3-3 A trip level), thermal shutdown (150-180 °C), or undervoltage lockout condition. |
| 7 | VSET | input | Voltage set input with 0.25 × VCC to 0.5 × VCC logic thresholds for regulating motor output voltage. |
| 8 | VREF | power_in | Reference voltage output of 1.235-1.335 V typical for external resistive divider to set motor voltage. |
| 9 | IN1 | input | Bridge A control input 1 with 0.25 × VCC to 0.5 × VCC logic thresholds; logic high sets OUT1 high for forward motor drive. |
| 10 | IN2 | input | Bridge A control input 2 with 0.25 × VCC to 0.5 × VCC logic thresholds; logic high sets OUT2 high for reverse motor drive. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-10-EP |
| Category | Motor Driver ICs |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
DRV8832DGQR - Footprint:
Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm - 3D model: MSOP-10-EP (KiCad packages3D, STEP)
- 3D model files:
drv8832dgqr-etched.step/drv8832dgqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);drv8832dgqr.step/drv8832dgqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
4e5c8cbcc3e06270, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).