component
DRV8800PWPR
Public Made by Adomby adom
Texas Instruments Brushed DC Motor Drivers, TSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+54@@ -0,0 +1,54 @@+# DRV8800PWPR++**Texas Instruments** · Brushed DC Motor Drivers · TSSOP-16-EP++DRV8800PWPR from Texas Instruments, in a TSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | nFAULT | output | Open-drain fault output, pulled low on motor fault, supply undervoltage, or junction temperature exceeding 160°C; requires external pullup resistor. |+| 2 | MODE | input | Mode selection input. Logic high selects slow-decay mode, logic low selects fast-decay mode. Input threshold VIH ≥ 2V, VIL ≤ 0.8V. |+| 3 | PHASE | input | Phase/direction control input. Logic high = forward, logic low = reverse. Controls H-bridge direction. Input threshold VIH ≥ 2V, VIL ≤ 0.8V. |+| 4 | GND | power_in | Device ground and return path for power supply and signal circuits. |+| 5 | nSLEEP | input | Sleep mode enable input. Logic high enables device operation, logic low enters low-power sleep mode with <10µA quiescent current. Internal pulldown resistor. Input threshold VIH ≥ 2.7V, VIL ≤ 0.8V. |+| 6 | ENABLE | input | Output enable control input. Logic high enables H-bridge, logic low disables output. Input threshold VIH ≥ 2V, VIL ≤ 0.8V. |+| 7 | OUT+ | output | H-bridge positive output to motor. Rated for ±2.8A peak current, typical RDS(on) = 0.4Ω at 25°C, 0.7Ω at 125°C. |+| 8 | SENSE | output | Current sense return output. Connect external 0.2Ω sense resistor between SENSE pin and ground to set overcurrent threshold at 500mV (2.8A typical); adjustable via RSENSE value. |+| 9 | VBB | power_in | Motor driver supply voltage input, operating range 8V to 36V. Bypass to GND with 0.1µF ceramic + 100µF bulk capacitor. Undervoltage lockout threshold 6.5V rising. |+| 10 | OUT- | output | H-bridge negative output to motor. Rated for ±2.8A peak current, typical RDS(on) = 0.4Ω at 25°C, 0.7Ω at 125°C. |+| 11 | CP1 | passive | Charge pump switching node. Connect 0.1µF X7R ceramic capacitor between CP1 and CP2; capacitor must be rated for VBB voltage. |+| 12 | CP2 | passive | Charge pump switching node. Connect 0.1µF X7R ceramic capacitor between CP1 and CP2; capacitor must be rated for VBB voltage. |+| 13 | GND | power_in | Device ground and return path for power supply and signal circuits. |+| 14 | VCP | power_out | Charge pump output and gate drive supply reservoir. Connect 0.1µF 16V X7R ceramic capacitor to VBB. Monitored internally; outputs disable if VCP falls below charge pump undervoltage threshold. |+| 15 | VREG | output | Regulated 7.5V reference voltage output. Leave disconnected in normal operation; provides internal regulator voltage reference measurement point. Do not load. |+| 16 | NC | unconnected | No connection. Must remain unconnected to any circuit node. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16-EP |+| Category | Motor Driver ICs |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `DRV8800PWPR`+- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16-EP (KiCad packages3D, STEP)+- 3D model files: `drv8800pwpr-etched.step` / `drv8800pwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `drv8800pwpr.step` / `drv8800pwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/drv8800) (40 pp, sha256 `8498d1c74347b1a9`, retrieved 2026-09-21, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/drv8800pwpr-datasheet.pdf)
page.jsonadded+199@@ -0,0 +1,199 @@+{+ "slug": "drv8800pwpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Brushed DC Motor Drivers, TSSOP-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "motor driver ics",+ "drv8800pwpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "drv8800pwpr.kicad_sym",+ "drv8800pwpr.kicad_mod",+ "drv8800pwpr.glb",+ "drv8800pwpr.step",+ "drv8800pwpr.lbr",+ "docs/hero.png",+ "docs/drv8800pwpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "DRV8800PWPR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-16-EP",+ "pin_count": 17,+ "category": "Motor Driver ICs",+ "subcategory": "Brushed DC Motor Drivers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/drv8800",+ "parts": {+ "symbol": "drv8800pwpr.kicad_sym",+ "footprint": "drv8800pwpr.kicad_mod",+ "model_3d": "drv8800pwpr-etched.glb",+ "model_3d_plain": "drv8800pwpr.glb",+ "model_3d_step": "drv8800pwpr-etched.step",+ "model_3d_step_plain": "drv8800pwpr.step",+ "lbr": "drv8800pwpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C32579"+ },+ "pins": [+ {+ "number": "1",+ "name": "nFAULT",+ "type": "output",+ "description": "Open-drain fault output, pulled low on motor fault, supply undervoltage, or junction temperature exceeding 160°C; requires external pullup resistor."+ },+ {+ "number": "2",+ "name": "MODE",+ "type": "input",+ "description": "Mode selection input. Logic high selects slow-decay mode, logic low selects fast-decay mode. Input threshold VIH ≥ 2V, VIL ≤ 0.8V."+ },+ {+ "number": "3",+ "name": "PHASE",+ "type": "input",+ "description": "Phase/direction control input. Logic high = forward, logic low = reverse. Controls H-bridge direction. Input threshold VIH ≥ 2V, VIL ≤ 0.8V."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground and return path for power supply and signal circuits."+ },+ {+ "number": "5",+ "name": "nSLEEP",+ "type": "input",+ "description": "Sleep mode enable input. Logic high enables device operation, logic low enters low-power sleep mode with <10µA quiescent current. Internal pulldown resistor. Input threshold VIH ≥ 2.7V, VIL ≤ 0.8V."+ },+ {+ "number": "6",+ "name": "ENABLE",+ "type": "input",+ "description": "Output enable control input. Logic high enables H-bridge, logic low disables output. Input threshold VIH ≥ 2V, VIL ≤ 0.8V."+ },+ {+ "number": "7",+ "name": "OUT+",+ "type": "output",+ "description": "H-bridge positive output to motor. Rated for ±2.8A peak current, typical RDS(on) = 0.4Ω at 25°C, 0.7Ω at 125°C."+ },+ {+ "number": "8",+ "name": "SENSE",+ "type": "output",+ "description": "Current sense return output. Connect external 0.2Ω sense resistor between SENSE pin and ground to set overcurrent threshold at 500mV (2.8A typical); adjustable via RSENSE value."+ },+ {+ "number": "9",+ "name": "VBB",+ "type": "power_in",+ "description": "Motor driver supply voltage input, operating range 8V to 36V. Bypass to GND with 0.1µF ceramic + 100µF bulk capacitor. Undervoltage lockout threshold 6.5V rising."+ },+ {+ "number": "10",+ "name": "OUT-",+ "type": "output",+ "description": "H-bridge negative output to motor. Rated for ±2.8A peak current, typical RDS(on) = 0.4Ω at 25°C, 0.7Ω at 125°C."+ },+ {+ "number": "11",+ "name": "CP1",+ "type": "passive",+ "description": "Charge pump switching node. Connect 0.1µF X7R ceramic capacitor between CP1 and CP2; capacitor must be rated for VBB voltage."+ },+ {+ "number": "12",+ "name": "CP2",+ "type": "passive",+ "description": "Charge pump switching node. Connect 0.1µF X7R ceramic capacitor between CP1 and CP2; capacitor must be rated for VBB voltage."+ },+ {+ "number": "13",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground and return path for power supply and signal circuits."+ },+ {+ "number": "14",+ "name": "VCP",+ "type": "power_out",+ "description": "Charge pump output and gate drive supply reservoir. Connect 0.1µF 16V X7R ceramic capacitor to VBB. Monitored internally; outputs disable if VCP falls below charge pump undervoltage threshold."+ },+ {+ "number": "15",+ "name": "VREG",+ "type": "output",+ "description": "Regulated 7.5V reference voltage output. Leave disconnected in normal operation; provides internal regulator voltage reference measurement point. Do not load."+ },+ {+ "number": "16",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. Must remain unconnected to any circuit node."+ },+ {+ "number": "17",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: PowerPAD exposed pad designated as 'EP' per industry convention for exposed pad; datasheet does not ",+ "exposed pad 17 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 40,+ "cost_usd": 0.4216,+ "at": "2026-09-21T23:31:23"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/drv8800",+ "pages": 40,+ "sha256": "8498d1c74347b1a9",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}