component
DRV8703QRHBTQ1
Public Made by Adomby adom
Texas Instruments Brushed DC Motor Drivers, VQFN-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344
{
"slug": "drv8703qrhbtq1",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Brushed DC Motor Drivers, VQFN-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"motor driver ics",
"drv8703qrhbtq1",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"drv8703qrhbtq1.kicad_sym",
"drv8703qrhbtq1.kicad_mod",
"drv8703qrhbtq1.glb",
"drv8703qrhbtq1.step",
"drv8703qrhbtq1.lbr",
"docs/hero.png",
"docs/drv8703qrhbtq1-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"drv8703qrhbtq1-hero.glb",
"drv8703qrhbtq1-hero.overlay.json",
"drv8703qrhbtq1-etched.glb"
],
"component": {
"mpn": "DRV8703QRHBTQ1",
"manufacturer": "Texas Instruments",
"package": "VQFN-32(5x5)",
"pin_count": 33,
"category": "Motor Driver ICs",
"subcategory": "Brushed DC Motor Drivers",
"datasheet": "https://www.ti.com/lit/ds/symlink/drv8703-q1.pdf",
"parts": {
"symbol": "drv8703qrhbtq1.kicad_sym",
"footprint": "drv8703qrhbtq1.kicad_mod",
"model_3d": "drv8703qrhbtq1-hero.glb",
"model_3d_plain": "drv8703qrhbtq1-etched.glb",
"model_3d_step": "drv8703qrhbtq1-etched.step",
"model_3d_step_plain": "drv8703qrhbtq1.step",
"lbr": "drv8703qrhbtq1.lbr"
},
"distributor_links": {
"lcsc": "C3681164",
"digikey": "296-48127-2-ND",
"mouser": "595-DRV8703QRHBTQ1"
},
"distributor_check": {
"checked_at": "2026-11-05T23:28:15Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-48127-2-ND",
"status": "found"
},
"mouser": {
"pn": "595-DRV8703QRHBTQ1",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GND",
"type": "power_in",
"description": "Device ground that must be connected to the system ground."
},
{
"number": "2",
"name": "IN1/PH",
"type": "input",
"description": "Input control pin whose logic function depends on the MODE pin and which has an internal pulldown resistor."
},
{
"number": "3",
"name": "IN2/EN",
"type": "input",
"description": "Input control pin whose logic function depends on the MODE pin and which has an internal pulldown resistor."
},
{
"number": "4",
"name": "SDO",
"type": "output",
"description": "SPI output that is an open-drain output requiring an external pullup resistor."
},
{
"number": "5",
"name": "nSCS",
"type": "input",
"description": "SPI chip select and enable, active low."
},
{
"number": "6",
"name": "SDI",
"type": "input",
"description": "SPI input signal with an internal pulldown resistor."
},
{
"number": "7",
"name": "SCLK",
"type": "input",
"description": "SPI clock signal with an internal pulldown resistor."
},
{
"number": "8",
"name": "nSLEEP",
"type": "input",
"description": "Pull to logic low to put the device into low-power sleep mode with the FETs in Hi-Z; has an internal pulldown resistor."
},
{
"number": "9",
"name": "nWDFLT",
"type": "output",
"description": "Watchdog fault indication pin that is pulled logic low on a watchdog fault and requires an external pullup resistor (open-drain)."
},
{
"number": "10",
"name": "nFAULT",
"type": "output",
"description": "Fault indication open-drain output that is pulled logic low when a fault condition occurs and requires an external pullup resistor."
},
{
"number": "11",
"name": "MODE",
"type": "input",
"description": "Control interface select pin latched on power-up or exit from sleep: logic low for PH/EN, high for independent half-bridge, Hi-Z for PWM."
},
{
"number": "12",
"name": "DVDD",
"type": "power_out",
"description": "Logic regulator output for the 3.3V logic supply, to be bypassed to ground with a 6.3V, 1µF ceramic capacitor."
},
{
"number": "13",
"name": "GND",
"type": "power_in",
"description": "Device ground that must be connected to the system ground."
},
{
"number": "14",
"name": "AVDD",
"type": "power_out",
"description": "5V analog supply regulator output, to be bypassed to ground with a 6.3V, 1µF ceramic capacitor."
},
{
"number": "15",
"name": "VREF",
"type": "power_in",
"description": "Current set reference input whose voltage sets the chopping current; valid range is 0.3 V to 3.6 V."
},
{
"number": "16",
"name": "SO",
"type": "output",
"description": "Shunt-amplifier output equal to SP voltage times AV plus offset, with no more than 1 nF of capacitance allowed on this pin."
},
{
"number": "17",
"name": "GND",
"type": "power_in",
"description": "Device ground that must be connected to the system ground."
},
{
"number": "18",
"name": "GH1",
"type": "output",
"description": "High-side gate drive output that connects to the high-side FET gate."
},
{
"number": "19",
"name": "SH1",
"type": "input",
"description": "High-side source connection that must be connected to the high-side FET source."
},
{
"number": "20",
"name": "GL1",
"type": "output",
"description": "Low-side gate drive output that connects to the low-side FET gate."
},
{
"number": "21",
"name": "SP",
"type": "input",
"description": "Shunt-amplifier positive input that connects to the current-sense resistor."
},
{
"number": "22",
"name": "SN",
"type": "input",
"description": "Shunt-amplifier negative input that connects to the current-sense resistor."
},
{
"number": "23",
"name": "SL2",
"type": "input",
"description": "Low-side source connection that must be connected to the low-side FET source."
},
{
"number": "24",
"name": "GL2",
"type": "output",
"description": "Low-side gate drive output that connects to the low-side FET gate."
},
{
"number": "25",
"name": "SH2",
"type": "input",
"description": "High-side source connection that must be connected to the high-side FET source."
},
{
"number": "26",
"name": "GH2",
"type": "output",
"description": "High-side gate drive output that connects to the high-side FET gate."
},
{
"number": "27",
"name": "VDRAIN",
"type": "input",
"description": "High-side FET drain connection that is common to the two H-bridges."
},
{
"number": "28",
"name": "VM",
"type": "power_in",
"description": "Motor supply input that is bypassed with a 0.1µF ceramic plus a 10µF (minimum) capacitor."
},
{
"number": "29",
"name": "VCP",
"type": "power_out",
"description": "Charge-pump output that connects to VM through a 16V, 1µF ceramic capacitor."
},
{
"number": "30",
"name": "CPH",
"type": "passive",
"description": "Charge-pump switching node that connects to CPL through a 0.1µF X7R capacitor rated for the supply voltage (VM)."
},
{
"number": "31",
"name": "CPL",
"type": "passive",
"description": "Charge-pump switching node that connects to CPH through a 0.1µF X7R capacitor rated for the supply voltage (VM)."
},
{
"number": "32",
"name": "NC",
"type": "unconnected",
"description": "No connect pin with no internal connection."
},
{
"number": "33",
"name": "PAD",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Addendum lists DRV8703QRHBTQ1 as Obsolete (Call TI) in VQFN (RHB) 32-pin package, so availability sh"
],
"pages_sent": 21,
"cost_usd": 0.0388,
"at": "2026-11-05T23:28:08"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/drv8703-q1.pdf",
"pages": 63,
"sha256": "41f247d459b34028",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 33,
"described": 33,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "drv8703qrhbtq1.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
"checked": "2026-11-05",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "drv8703qrhbtq1-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "08ba9b45f97cf77c54fad21591c23e75c6f89e5f85af41d2d3a2f8c58e8524e6",
"checked": "2026-11-05",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}