main
History Download
Ray Initial commit: component/drv8601drbr 55632d8

DRV8601DRBR

Texas Instruments · Brushed DC Motor Drivers · VSON-8-EP(3x3)

DRV8601DRBR from Texas Instruments, in a VSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable input with 1.8-V compatibility; activates normal operation when high (≥1.15 V) and enters low-power shutdown consuming 10 nA when low (≤0.5 V).
2 REFOUT output Reference voltage output set to VDD/2 by internal voltage divider; requires external capacitor for noise filtering and PSRR improvement.
3 IN2 input Single-ended analog input accepting PWM or DC voltage for motor control with input impedance of 2 MΩ.
4 IN1 input Single-ended analog input accepting PWM or DC voltage for motor control with input impedance of 2 MΩ.
5 OUT+ output Positive differential motor drive output capable of sourcing and sinking up to 400 mA with output voltage swing from 0 to VDD.
6 VDD power_in Power supply input with recommended operating range of 2.5 V to 5.5 V; requires decoupling capacitor placed close to pin.
7 GND power_in Power supply ground reference for all signal levels.
8 OUT- output Negative differential motor drive output capable of sourcing and sinking up to 400 mA with output voltage swing from ground to VDD.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSON-8-EP(3x3)
Category Motor Driver ICs
Pins 9

CAD (KiCad official)

  • Symbol: DRV8601DRBR
  • Footprint: Package_SON:VSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm
  • 3D model: VSON-8-EP(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal VQFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: drv8601drbr-etched.step / drv8601drbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); drv8601drbr.step / drv8601drbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 a916e1157bd322ee, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF