component
DRV8353RHRGZR
Public Made by Adomby adom
Texas Instruments Brushless DC (BLDC) Motor Driver, VQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+12−9@@ -59,7 +59,7 @@ "number": "2", "name": "VGLS", "type": "power_out",- "description": "11-V internal regulator output. Connect a X5R or X7R, 1-\u00b5F, 16-V ceramic capacitor between the VGLS and GND pins."+ "description": "11-V internal regulator output. Connect a X5R or X7R, 1-µF, 16-V ceramic capacitor between the VGLS and GND pins." }, { "number": "3",@@ -77,7 +77,7 @@ "number": "5", "name": "VM", "type": "power_in",- "description": "Gate driver power supply input. Connect to either VDRAIN or separate gate driver supply voltage with 0.1-\u00b5F, VM-rated ceramic and \u226510-\u00b5F local capacitance between the VM and GND pins."+ "description": "Gate driver power supply input. Connect to either VDRAIN or separate gate driver supply voltage with 0.1-µF, VM-rated ceramic and ≥10-µF local capacitance between the VM and GND pins." }, { "number": "6",@@ -89,7 +89,7 @@ "number": "7", "name": "VCP", "type": "power_out",- "description": "Charge pump output. Connect a X5R or X7R, 1-\u00b5F, 16-V ceramic capacitor between the VCP and VDRAIN pins."+ "description": "Charge pump output. Connect a X5R or X7R, 1-µF, 16-V ceramic capacitor between the VCP and VDRAIN pins." }, { "number": "8",@@ -203,7 +203,7 @@ "number": "26", "name": "VREF", "type": "power_out",- "description": "Shunt amplifier power supply input and reference. Connect a X5R or X7R, 0.1-\u00b5F, 6.3-V ceramic capacitor between the VREF and AGND pins."+ "description": "Shunt amplifier power supply input and reference. Connect a X5R or X7R, 0.1-µF, 6.3-V ceramic capacitor between the VREF and AGND pins." }, { "number": "27",@@ -245,7 +245,7 @@ "number": "33", "name": "ENABLE", "type": "input",- "description": "Gate driver enable. When this pin is logic low the device goes to a low power sleep mode. An 8 to 40-\u00b5s low pulse can be used to reset fault conditions."+ "description": "Gate driver enable. When this pin is logic low the device goes to a low power sleep mode. An 8 to 40-µs low pulse can be used to reset fault conditions." }, { "number": "34",@@ -287,7 +287,7 @@ "number": "40", "name": "DVDD", "type": "power_out",- "description": "5-V internal regulator output. Connect a X5R or X7R, 1-\u00b5F, 6.3-V ceramic capacitor between the DVDD and DGND pins. This regulator can source up to 10 mA externally."+ "description": "5-V internal regulator output. Connect a X5R or X7R, 1-µF, 6.3-V ceramic capacitor between the DVDD and DGND pins. This regulator can source up to 10 mA externally." }, { "number": "41",@@ -311,13 +311,13 @@ "number": "44", "name": "VCC", "type": "power_out",- "description": "7-V internal regulator output. Gate supply for buck switch. Connect a X5R or X7R, 0.47-\u00b5F, 16-V ceramic capacitor between the VCC and GND pins."+ "description": "7-V internal regulator output. Gate supply for buck switch. Connect a X5R or X7R, 0.47-µF, 16-V ceramic capacitor between the VCC and GND pins." }, { "number": "45", "name": "BST", "type": "power_in",- "description": "Buck regulator bootstrap input. Connect a X5R or X7R, 0.01-\u00b5F, 16-V, capacitor between the BST and SW pins."+ "description": "Buck regulator bootstrap input. Connect a X5R or X7R, 0.01-µF, 16-V, capacitor between the BST and SW pins." }, { "number": "46",@@ -421,5 +421,8 @@ "docs/drv8353rhrgzr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }