← Commit history
README.md+121−69
@@ -1,71 +1,123 @@ # DRV8300DPWR -Three-phase non-inverting gate driver, 5-20 V GVDD, 750 mA source / 1.5 A sink, integrated bootstrap diodes, TSSOP-20.--The preview places the part on a thin display fixture; the STEP and GLB contain only the component.--DPWR uses non-inverting high and low inputs. The DIPWR low-input-inverting variant is not a drop-in substitution. Use at least 1 uF bootstrap capacitance and 10 uF local GVDD decoupling as specified by TI.--## Native library--This page includes a KiCad symbol and footprint, STEP and OCCT-converted GLB models, canonical Adom library JSON, and an EAGLE/Fusion library. Pin numbers are preserved across formats.--| Pin | Name | Electrical type |-| --- | --- | --- |-| 1 | INHA | input |-| 2 | INHB | input |-| 3 | INHC | input |-| 4 | INLA | input |-| 5 | INLB | input |-| 6 | INLC | input |-| 7 | GVDD | power_in |-| 8 | GND | power_in |-| 9 | GLC | output |-| 10 | GLB | output |-| 11 | GLA | output |-| 12 | SHC | passive |-| 13 | GHC | output |-| 14 | BSTC | passive |-| 15 | SHB | passive |-| 16 | GHB | output |-| 17 | BSTB | passive |-| 18 | SHA | passive |-| 19 | GHA | output |-| 20 | BSTA | passive |--## Source and validation--- [Manufacturer data](https://www.ti.com/lit/ds/symlink/drv8300.pdf)-- Native footprint: `Package_SO:Texas_PW0020A_TSSOP-20_4.4x6.5mm_P0.65mm` from KiCad 10.0.3, with the documented package-specific adjustments above.-- Symbol: authored against the manufacturer pin table.-- CAD and dimensions reviewed 2026-09-04. The model is for board clearance and visualization; use the current manufacturer drawing for production tolerances.-- Native KiCad library data is distributed under CC-BY-SA-4.0 with the KiCad library exception; manufacturer documents retain their original rights.---<!-- astra-asset-provenance:start -->-## CAD provenance and independent review--**Audit by Codex Astra (AI).** [Per-file provenance, sources and checks](https://wiki.adom.inc/adom/drv8300dpwr/files/PROVENANCE.md) documents the current file hashes, source or generation inputs, modifications, verification limits and unknown origins. AI-created models are identified explicitly; a wiki upload is not manufacturer verification.--**Unresolved original provenance:** symbol, footprint, step, glb. See the record before treating these as source-verified assets.--[Report a component problem](https://wiki.adom.inc/adom/drv8300dpwr/issues) with the filename/hash and evidence.-<!-- astra-asset-provenance:end -->---[Optional MPN-marked model, preview and provenance](MPN-MARKING.md)---## Displayed model and review status--The main 3D viewer uses [drv8300dpwr-hero-mpn.glb](drv8300dpwr-hero-mpn.glb), derived from the reviewed [drv8300dpwr-mpn.glb](drv8300dpwr-mpn.glb). The exact MPN is AI-added identification artwork, not a factory marking. [Marking inputs, fit and licensing](MPN-MARKING.md) and [source provenance](PROVENANCE.md) remain applicable.--The hero applies only a 180-degree Z display rotation; no geometry is scaled. Use the original-frame marked STEP/GLB downloads for board assemblies. The rendered package and readable mark were reviewed; that does not establish manufacturer-exact dimensions, polarity, or native-tool qualification. [Binding and file hashes](hero-binding.json).---## Footprint-aware inspection hero--The current hero adds separate nonphysical reference layers: teal dashed copper boundaries at 50% opacity, silkscreen at 30% opacity and actual symbol pin names (unique pad numbers when unnamed) at 50% opacity. Orbit underneath to compare physical terminals, copper and pin1 marks. Copper outlines are not soldermask/paste. Existing MPN, materials, animations and lights are preserved. These helpers are excluded from board-use STEP/GLB files. [Geometry, mapping and source hashes](drv8300dpwr-hero-footprint.overlay.json); [pin-map input](hero-pin-map.json). Physical body can occlude seating-plane artwork; inspect the underside or isolate it. Generated display-font contours are not native fab artwork.---The inspection audit found no visible silk contours in the prior footprint. AI-added/restored outline strokes now appear in the actual footprint and hero; the DRV8300 pin1 triangle was restored from its existing fabrication drawing. Copper pads are unchanged. [Revision method and hashes](hero-footprint-revision.json). Native parser validation is separate from fabrication approval.+**Texas Instruments** · Brushless DC (BLDC) Motor Driver · TSSOP-20++DRV8300DPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | INHA | input | High-side gate driver control input that controls the output of the high-side gate driver. |+| 2 | INHB | input | High-side gate driver control input that controls the output of the high-side gate driver. |+| 3 | INHC | input | High-side gate driver control input that controls the output of the high-side gate driver. |+| 4 | INLA | input | Low-side gate driver control input that controls the output of the low-side gate driver. |+| 5 | INLB | input | Low-side gate driver control input that controls the output of the low-side gate driver. |+| 6 | INLC | input | Low-side gate driver control input that controls the output of the low-side gate driver. |+| 7 | GVDD | power_in | Gate driver power supply input; connect a X5R or X7R, GVDD-rated ceramic of at least 10 uF local capacitance between GVDD and GND. |+| 8 | GND | power_in | Device ground. |+| 9 | GLC | output | Low-side gate driver output; connect to the gate of the low-side power MOSFET. |+| 10 | GLB | output | Low-side gate driver output; connect to the gate of the low-side power MOSFET. |+| 11 | GLA | output | Low-side gate driver output; connect to the gate of the low-side power MOSFET. |+| 12 | SHC | input | High-side source sense input; connect to the high-side power MOSFET source. |+| 13 | GHC | output | High-side gate driver output; connect to the gate of the high-side power MOSFET. |+| 14 | BSTC | output | Bootstrap output pin; connect capacitor between BSTC and SHC. |+| 15 | SHB | input | High-side source sense input; connect to the high-side power MOSFET source. |+| 16 | GHB | output | High-side gate driver output; connect to the gate of the high-side power MOSFET. |+| 17 | BSTB | output | Bootstrap output pin; connect capacitor between BSTB and SHB. |+| 18 | SHA | input | High-side source sense input; connect to the high-side power MOSFET source. |+| 19 | GHA | output | High-side gate driver output; connect to the gate of the high-side power MOSFET. |+| 20 | BSTA | output | Bootstrap output pin; connect capacitor between BSTA and SHA. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-20 |+| Category | Motor Driver ICs |+| Pins | 20 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Gate driver regulator pin voltage GVDD |  | -0.3 |  | 21.5 | V |  | 6 |+| Bootstrap pin voltage BSTx |  | -0.3 |  | 125 | V |  | 6 |+| Bootstrap pin voltage BSTx with respect to SHx |  | -0.3 |  | 21.5 | V |  | 6 |+| Logic pin voltage INHx, INLx, MODE, DT |  | -0.3 |  |  | V | max printed as VGVDD+0.3 | 6 |+| High-side gate drive pin voltage GHx |  | -22 |  | 125 | V |  | 6 |+| High-side gate drive pin voltage GHx with respect to SHx |  | -0.3 |  | 22 | V |  | 6 |+| Transient 500-ns high-side gate drive pin voltage GHx with respect to SHx |  | -5 |  | 22 | V | Transient 500-ns | 6 |+| Low-side gate drive pin voltage GLx |  | -0.3 |  |  | V | max printed as VGVDD+0.3 | 6 |+| Transient 500-ns low-side gate drive pin voltage GLx |  | -5 |  |  | V | Transient 500-ns; max printed as VGVDD+0.3 | 6 |+| High-side source pin voltage SHx |  | -22 |  | 110 | V |  | 6 |+| Ambient temperature TA |  | -40 |  | 125 | °C |  | 6 |+| Junction temperature TJ |  | -40 |  | 150 | °C |  | 6 |+| Storage temperature Tstg |  | -65 |  | 150 | °C |  | 6 |+| Gate driver supply voltage GVDD | VGVDD | 5 |  | 20 | V |  | 6 |+| High-side source pin voltage SHx | VSHx | -2 |  | 85 | V |  | 6 |+| Transient 2µs high-side source pin voltage SHx | VSHx | -22 |  | 85 | V | Transient 2µs | 6 |+| Bootstrap pin voltage BSTx | VBST | 5 |  | 105 | V |  | 6 |+| Bootstrap pin voltage BSTx with respect to SHx | VBST | 5 |  | 20 | V |  | 6 |+| Logic input voltage INHx, INLx, MODE, DT | VIN | 0 |  |  | V | max printed as GVDD | 6 |+| PWM frequency INHx, INLx | fPWM | 0 |  | 200 | kHz |  | 6 |+| Slew rate on SHx pin (DRV8300D and DRV8300DI) | VSHSL |  |  | 2 | V/ns | DRV8300D and DRV8300DI | 6 |+| Capacitor between BSTx and SHx (DRV8300D and DRV8300DI) | CBOOT |  |  | 1 | µF | DRV8300D and DRV8300DI | 6 |+| Operating ambient temperature TA | TA | -40 |  | 125 | °C |  | 6 |+| Operating junction temperature TJ | TJ | -40 |  | 150 | °C |  | 7 |+| GVDD standby mode current | IGVDD | 400 | 800 | 1400 | µA | INHx = INLX = 0; VBSTx = VGVDD | 7 |+| GVDD active mode current | IGVDD | 400 | 825 | 1400 | µA | INHx = INLX = Switching @20kHz; VBSTx = VGVDD; NO FETs connected | 7 |+| Bootstrap pin leakage current | ILBSx | 2 | 4 | 7 | µA | VBSTx = VSHx = 85V; VGVDD = 0V | 7 |+| Bootstrap pin active mode transient leakage current | ILBS_TRAN | 30 | 105 | 220 | µA | INHx = Switching@20kHz | 7 |+| Bootstrap pin active mode leakage static current | ILBS_DC | 30 | 85 | 150 | µA | INHx = High | 7 |+| High-side source pin leakage current | ILSHx | 30 | 55 | 80 | µA | INHx = INLX = 0; VBSTx - VSHx = 12V; VSHx = 0 to 85V | 7 |+| Input logic low voltage INLx, INHx pins | VIL |  |  | 0.8 | V | INLx, INHx pins | 7 |+| Input logic high voltage INLx, INHx pins | VIH | 2 |  |  | V | INLx, INHx pins | 7 |+| High-side gate drive low level voltage | VGHx_LO | 0 | 0.15 | 0.35 | V | IGLx = -100 mA; VGVDD = 12V; No FETs connected | 8 |+| High-side gate drive high level voltage (VBSTx - VGHx) | VGHx_HI | 0.3 | 0.6 | 1.2 | V | IGHx = 100 mA; VGVDD = 12V; No FETs connected | 8 |+| High-side peak source gate current | IDRIVEP_HS | 400 | 750 | 1200 | mA | GHx-SHx = 12V | 8 |+| High-side peak sink gate current | IDRIVEN_HS | 850 | 1500 | 2100 | mA | GHx-SHx = 0V | 8 |+| Low-side peak source gate current | IDRIVEP_LS | 400 | 750 | 1200 | mA | GLx = 12V | 8 |+| Low-side peak sink gate current | IDRIVEN_LS | 850 | 1500 | 2100 | mA | GLx = 0V | 8 |+| Input to output propagation delay | tPD | 70 | 125 | 180 | ns | INHx, INLx to GHx, GLx; VGVDD = VBSTx - VSHx > 8V; SHx = 0V, No load on GHx and GLx | 8 |+| Matching propagation delay per phase | tPD_match | -30 | 4 | 30 | ns | GHx turning OFF to GLx turning ON, GLx turning OFF to GHx turning ON; VGVDD = VBSTx - VSHx > 8V; SHx = 0V, No load on GHx and GLx | 8 |+| Matching propagation delay phase to phase | tPD_match | -30 | 4 | 30 | ns | GHx/GLx turning ON to GHy/GLy turning ON, GHx/GLx turning OFF to GHy/GLy turning OFF; VGVDD = VBSTx - VSHx > 8V; SHx = 0V, No load on GHx and GLx | 8 |+| GLx rise time (10% to 90%) | tR_GLx | 10 | 24 | 50 | ns | CLOAD = 1000 pF; VGVDD = VBSTx - VSHx > 8V; SHx = 0V | 8 |+| GHx rise time (10% to 90%) | tR_GHx | 10 | 24 | 50 | ns | CLOAD = 1000 pF; VGVDD = VBSTx - VSHx > 8V; SHx = 0V | 8 |+| GLx fall time (90% to 10%) | tF_GLx | 5 | 12 | 30 | ns | CLOAD = 1000 pF; VGVDD = VBSTx - VSHx > 8V; SHx = 0V | 8 |+| GHx fall time (90% to 10%) | tF_GHx | 5 | 12 | 30 | ns | CLOAD = 1000 pF; VGVDD = VBSTx - VSHx > 8V; SHx = 0V | 8 |+| Gate drive dead time | tDEAD | 150 | 215 | 280 | ns | DT pin floating | 8 |+| Minimum input pulse width on INHx, INLx that changes the output on GHx, GLx | tPW_MIN | 40 | 70 | 150 | ns |  | 8 |+| Bootstrap diode forward voltage | VBOOTD | 0.45 | 0.7 | 0.85 | V | IBOOT = 100 µA | 8 |+| Bootstrap diode forward voltage | VBOOTD | 2 | 2.3 | 3.1 | V | IBOOT = 100 mA | 8 |+| Bootstrap dynamic resistance (ΔVBOOTD/ΔIBOOT) | RBOOTD | 11 | 15 | 25 | Ω | IBOOT = 100 mA and 80 mA | 8 |+| Gate Driver Supply undervoltage lockout (GVDDUV) supply rising | VGVDDUV | 4.45 | 4.6 | 4.7 | V | Supply rising | 8 |+| Gate Driver Supply undervoltage lockout (GVDDUV) supply falling | VGVDDUV | 4.2 | 4.35 | 4.4 | V | Supply falling | 8 |+| Gate Driver Supply UV hysteresis | VGVDDUV_HYS | 250 | 280 | 310 | mV | Rising to falling threshold | 8 |+| Boot Strap undervoltage lockout (VBSTx - VSHx) supply rising | VBSTUV | 3.6 | 4.2 | 4.8 | V | Supply rising | 9 |+| Boot Strap undervoltage lockout (VBSTx - VSHx) supply falling | VBSTUV | 3.5 | 4 | 4.5 | V | Supply falling | 9 |+| Junction-to-ambient thermal resistance | RθJA |  | 97.4 |  | °C/W | PW (TSSOP) 20 pins | 7 |+| Junction-to-board thermal resistance | RθJB |  | 48.8 |  | °C/W | PW (TSSOP) 20 pins | 7 |+| Junction-to-case (top) thermal resistance | RθJC(top) |  | 38.3 |  | °C/W | PW (TSSOP) 20 pins | 7 |+| Junction-to-top characterization parameter | ΨJT |  | 4.3 |  | °C/W | PW (TSSOP) 20 pins | 7 |+| Junction-to-board characterization parameter | ΨJB |  | 48.4 |  | °C/W | PW (TSSOP) 20 pins | 7 |++## CAD (KiCad official)++- Symbol: `DRV8300DPWR`+- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`+- 3D model: TSSOP-20 (KiCad packages3D, STEP)+- 3D model files: `drv8300dpwr-etched.step` / `drv8300dpwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `drv8300dpwr.step` / `drv8300dpwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/drv8300.pdf) (35 pp, sha256 `bb467652a531335d`, retrieved 2026-11-16, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/drv8300dpwr-datasheet.pdf)
docs/drv8300dpwr-datasheet.pdfadded
⋯ 1 unchanged line ⋯
drv8300dpwr-hero.glbadded
⋯ 1 unchanged line ⋯
drv8300dpwr-hero.overlay.jsonadded+524
@@ -0,0 +1,524 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "DRV8300DPWR",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 20,+      "span_mm": 7.2,+      "dash_mm": 0.18,+      "gap_mm": 0.108,+      "pad_stroke_mm": 0.0432+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 3,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 20,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.576,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -3.2,+      3.2,+      -3.055,+      3.055+    ],+    "pads_bbox_mm": [+      -3.6,+      3.6,+      -3.125,+      3.125+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "drv8300dpwr-etched.glb",+    "glb_sha256": "1141ea065fc16a3fab21d3e9c64cd9fefff9e18cc5a7b1133dbf9e12334de66a",+    "footprint": "drv8300dpwr.kicad_mod",+    "footprint_sha256": "b7ca3a31dd45c1225609f9b94e8ba1534bd16edd193628c8d67a8ea669b26b72",+    "pins": "page.json component.pins",+    "pins_sha256": "294e577f57564a6c839961b473ce88f1409d3e5e6b12d3a851706b6f53cea41e"+  },+  "generator": "adom-wiki 1.8.25 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "INHA",+      "x": -4.29,+      "y": -2.925,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "2",+      "text": "INHB",+      "x": -3.7,+      "y": -2.275,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "3",+      "text": "INHC",+      "x": -3.7,+      "y": -1.625,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "4",+      "text": "INLA",+      "x": -3.7,+      "y": -0.975,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "5",+      "text": "INLB",+      "x": -3.7,+      "y": -0.325,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "6",+      "text": "INLC",+      "x": -3.7,+      "y": 0.325,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "7",+      "text": "GVDD",+      "x": -3.7,+      "y": 0.975,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "8",+      "text": "GND",+      "x": -3.7,+      "y": 1.625,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "9",+      "text": "GLC",+      "x": -3.7,+      "y": 2.275,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "10",+      "text": "GLB",+      "x": -3.7,+      "y": 2.925,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "11",+      "text": "GLA",+      "x": 3.7,+      "y": 2.925,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "12",+      "text": "SHC",+      "x": 3.7,+      "y": 2.275,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "13",+      "text": "GHC",+      "x": 3.7,+      "y": 1.625,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "14",+      "text": "BSTC",+      "x": 3.7,+      "y": 0.975,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "15",+      "text": "SHB",+      "x": 3.7,+      "y": 0.325,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "16",+      "text": "GHB",+      "x": 3.7,+      "y": -0.325,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "17",+      "text": "BSTB",+      "x": 3.7,+      "y": -0.975,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "18",+      "text": "SHA",+      "x": 3.7,+      "y": -1.625,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "19",+      "text": "GHA",+      "x": 3.7,+      "y": -2.275,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "20",+      "text": "BSTA",+      "x": 3.7,+      "y": -2.925,+      "align": "left",+      "vertical": false,+      "h": 0.325+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    }+  ]+}
drv8300dpwr.kicad_mod+336−1
@@ -1 +1,336 @@-(footprint "drv8300dpwr" (version 20260206) (generator "kicad-footprint-generator") (layer "F.Cu") (descr "Texas PW0020A TSSOP, 20 Pin (https://www.ti.com/lit/ml/mpds362a/mpds362a.pdf)") (tags "Texas TSSOP SO") (property "Reference" "REF**" (at 0 -4.2 0) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15)))) (property "Value" "Texas_PW0020A_TSSOP-20_4.4x6.5mm_P0.65mm" (at 0 4.2 0) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15)))) (property "KiLib_Generator" "package/gullwing" (at 0 0 0) (layer "F.SilkS") (hide yes) (effects (font (size 1 1) (thickness 0.15)))) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line (start -2.31 -3.41) (end 2.31 -3.41) (stroke (width 0.12) (type solid)) (layer "F.SilkS")) (fp_line (start 2.31 3.41) (end -2.31 3.41) (stroke (width 0.12) (type solid)) (layer "F.SilkS")) (fp_poly (pts (xy -3.91 -2.93) (xy -4.24 -2.69) (xy -4.24 -3.17)) (stroke (width 0.12) (type solid)) (fill yes) (layer "F.SilkS")) (fp_line (start -3.9 -3.4) (end -2.45 -3.4) (stroke (width 0.05) (type solid)) (layer "F.CrtYd")) (fp_line (start -3.9 3.4) (end -3.9 -3.4) (stroke (width 0.05) (type solid)) (layer "F.CrtYd")) (fp_line (start -2.45 -3.5) (end 2.45 -3.5) (stroke (width 0.05) (type solid)) (layer "F.CrtYd")) (fp_line (start -2.45 -3.4) (end -2.45 -3.5) (stroke (width 0.05) (type solid)) (layer "F.CrtYd")) (fp_line (start -2.45 3.4) (end -3.9 3.4) (stroke (width 0.05) (type solid)) (layer "F.CrtYd")) (fp_line (start -2.45 3.5) (end -2.45 3.4) (stroke (width 0.05) (type solid)) (layer "F.CrtYd")) (fp_line (start 2.45 -3.5) (end 2.45 -3.4) (stroke (width 0.05) (type solid)) (layer "F.CrtYd")) (fp_line (start 2.45 -3.4) (end 3.9 -3.4) (stroke (width 0.05) (type solid)) (layer "F.CrtYd")) (fp_line (start 2.45 3.4) (end 2.45 3.5) (stroke (width 0.05) (type solid)) (layer "F.CrtYd")) (fp_line (start 2.45 3.5) (end -2.45 3.5) (stroke (width 0.05) (type solid)) (layer "F.CrtYd")) (fp_line (start 3.9 -3.4) (end 3.9 3.4) (stroke (width 0.05) (type solid)) (layer "F.CrtYd")) (fp_line (start 3.9 3.4) (end 2.45 3.4) (stroke (width 0.05) (type solid)) (layer "F.CrtYd")) (fp_poly (pts (xy -1.2 -3.25) (xy 2.2 -3.25) (xy 2.2 3.25) (xy -2.2 3.25) (xy -2.2 -2.25)) (stroke (width 0.1) (type solid)) (fill no) (layer "F.Fab")) (fp_text user "${REFERENCE}" (at 0 0 0) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15)))) (pad "1" smd roundrect (at -2.9 -2.925) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "2" smd roundrect (at -2.9 -2.275) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "3" smd roundrect (at -2.9 -1.625) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "4" smd roundrect (at -2.9 -0.975) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "5" smd roundrect (at -2.9 -0.325) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "6" smd roundrect (at -2.9 0.325) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "7" smd roundrect (at -2.9 0.975) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "8" smd roundrect (at -2.9 1.625) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "9" smd roundrect (at -2.9 2.275) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "10" smd roundrect (at -2.9 2.925) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "11" smd roundrect (at 2.9 2.925) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "12" smd roundrect (at 2.9 2.275) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "13" smd roundrect (at 2.9 1.625) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "14" smd roundrect (at 2.9 0.975) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "15" smd roundrect (at 2.9 0.325) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "16" smd roundrect (at 2.9 -0.325) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "17" smd roundrect (at 2.9 -0.975) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "18" smd roundrect (at 2.9 -1.625) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "19" smd roundrect (at 2.9 -2.275) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (pad "20" smd roundrect (at 2.9 -2.925) (size 1.5 0.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)) (embedded_fonts no) (model "${KIPRJMOD}/drv8300dpwr.step" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0))))+(footprint "TSSOP-20_4.4x6.5mm_P0.65mm"+	(version 20260206)+	(generator "kicad-footprint-generator")+	(layer "F.Cu")+	(descr "TSSOP, 20 Pin (JEDEC MO-153 Var AC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153)")+	(tags "TSSOP SO")+	(property "Reference" "REF**"+		(at 0 -4.2 0)+		(layer "F.SilkS")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "Value" "TSSOP-20_4.4x6.5mm_P0.65mm"+		(at 0 4.2 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "KiLib_Generator" "package/gullwing"+		(at 0 0 0)+		(layer "F.SilkS")+		(hide yes)+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(attr smd)+	(duplicate_pad_numbers_are_jumpers no)+	(fp_line+		(start -2.31 -3.385)+		(end 2.31 -3.385)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 2.31 3.385)+		(end -2.31 3.385)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_poly+		(pts+			(xy -3.86 -2.93)+			(xy -4.19 -2.69)+			(xy -4.19 -3.17)+		)+		(stroke+			(width 0.12)+			(type solid)+		)+		(fill yes)+		(layer "F.SilkS")+	)+	(fp_line+		(start -3.85 -3.38)+		(end -2.45 -3.38)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -3.85 3.38)+		(end -3.85 -3.38)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -2.45 -3.5)+		(end 2.45 -3.5)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -2.45 -3.38)+		(end -2.45 -3.5)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -2.45 3.38)+		(end -3.85 3.38)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -2.45 3.5)+		(end -2.45 3.38)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 2.45 -3.5)+		(end 2.45 -3.38)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 2.45 -3.38)+		(end 3.85 -3.38)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 2.45 3.38)+		(end 2.45 3.5)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 2.45 3.5)+		(end -2.45 3.5)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 3.85 -3.38)+		(end 3.85 3.38)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 3.85 3.38)+		(end 2.45 3.38)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_poly+		(pts+			(xy -1.2 -3.25)+			(xy 2.2 -3.25)+			(xy 2.2 3.25)+			(xy -2.2 3.25)+			(xy -2.2 -2.25)+		)+		(stroke+			(width 0.1)+			(type solid)+		)+		(fill no)+		(layer "F.Fab")+	)+	(fp_text user "${REFERENCE}"+		(at 0 0 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(pad "1" smd roundrect+		(at -2.8625 -2.925)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "2" smd roundrect+		(at -2.8625 -2.275)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "3" smd roundrect+		(at -2.8625 -1.625)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "4" smd roundrect+		(at -2.8625 -0.975)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "5" smd roundrect+		(at -2.8625 -0.325)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "6" smd roundrect+		(at -2.8625 0.325)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "7" smd roundrect+		(at -2.8625 0.975)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "8" smd roundrect+		(at -2.8625 1.625)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "9" smd roundrect+		(at -2.8625 2.275)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "10" smd roundrect+		(at -2.8625 2.925)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "11" smd roundrect+		(at 2.8625 2.925)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "12" smd roundrect+		(at 2.8625 2.275)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "13" smd roundrect+		(at 2.8625 1.625)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "14" smd roundrect+		(at 2.8625 0.975)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "15" smd roundrect+		(at 2.8625 0.325)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "16" smd roundrect+		(at 2.8625 -0.325)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "17" smd roundrect+		(at 2.8625 -0.975)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "18" smd roundrect+		(at 2.8625 -1.625)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "19" smd roundrect+		(at 2.8625 -2.275)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "20" smd roundrect+		(at 2.8625 -2.925)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(embedded_fonts no)+	(model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/TSSOP-20_4.4x6.5mm_P0.65mm.step"+		(offset+			(xyz 0 0 0)+		)+		(scale+			(xyz 1 1 1)+		)+		(rotate+			(xyz 0 0 0)+		)+	)+)
drv8300dpwr.kicad_sym+93−1
@@ -1 +1,93 @@-(kicad_symbol_lib (version 20251024) (generator "kicad_symbol_editor") (symbol "DRV8300DPWR" (pin_names (offset 0.5)) (in_bom yes) (on_board yes) (property "Reference" "U" (at 0 16.51 0) (effects (font (size 1.27 1.27)))) (property "Value" "DRV8300DPWR" (at 0 -16.51 0) (effects (font (size 1.27 1.27)))) (symbol "DRV8300DPWR_0_1" (rectangle (start -10.16 13.97) (end 10.16 -13.97) (stroke (width 0.254) (type default)) (fill (type background)))) (symbol "DRV8300DPWR_1_1" (pin input line (at -12.7 11.43 0) (length 2.54) (name "INHA" (effects (font (size 1 1)))) (number "1" (effects (font (size 1 1))))) (pin input line (at -12.7 8.89 0) (length 2.54) (name "INHB" (effects (font (size 1 1)))) (number "2" (effects (font (size 1 1))))) (pin input line (at -12.7 6.3500000000000005 0) (length 2.54) (name "INHC" (effects (font (size 1 1)))) (number "3" (effects (font (size 1 1))))) (pin input line (at -12.7 3.8100000000000005 0) (length 2.54) (name "INLA" (effects (font (size 1 1)))) (number "4" (effects (font (size 1 1))))) (pin input line (at -12.7 1.2700000000000014 0) (length 2.54) (name "INLB" (effects (font (size 1 1)))) (number "5" (effects (font (size 1 1))))) (pin input line (at -12.7 -1.2699999999999996 0) (length 2.54) (name "INLC" (effects (font (size 1 1)))) (number "6" (effects (font (size 1 1))))) (pin power_in line (at -12.7 -3.8100000000000005 0) (length 2.54) (name "GVDD" (effects (font (size 1 1)))) (number "7" (effects (font (size 1 1))))) (pin power_in line (at -12.7 -6.35 0) (length 2.54) (name "GND" (effects (font (size 1 1)))) (number "8" (effects (font (size 1 1))))) (pin output line (at -12.7 -8.889999999999999 0) (length 2.54) (name "GLC" (effects (font (size 1 1)))) (number "9" (effects (font (size 1 1))))) (pin output line (at -12.7 -11.429999999999998 0) (length 2.54) (name "GLB" (effects (font (size 1 1)))) (number "10" (effects (font (size 1 1))))) (pin output line (at 12.7 11.43 180) (length 2.54) (name "GLA" (effects (font (size 1 1)))) (number "11" (effects (font (size 1 1))))) (pin passive line (at 12.7 8.89 180) (length 2.54) (name "SHC" (effects (font (size 1 1)))) (number "12" (effects (font (size 1 1))))) (pin output line (at 12.7 6.3500000000000005 180) (length 2.54) (name "GHC" (effects (font (size 1 1)))) (number "13" (effects (font (size 1 1))))) (pin passive line (at 12.7 3.8100000000000005 180) (length 2.54) (name "BSTC" (effects (font (size 1 1)))) (number "14" (effects (font (size 1 1))))) (pin passive line (at 12.7 1.2700000000000014 180) (length 2.54) (name "SHB" (effects (font (size 1 1)))) (number "15" (effects (font (size 1 1))))) (pin output line (at 12.7 -1.2699999999999996 180) (length 2.54) (name "GHB" (effects (font (size 1 1)))) (number "16" (effects (font (size 1 1))))) (pin passive line (at 12.7 -3.8100000000000005 180) (length 2.54) (name "BSTB" (effects (font (size 1 1)))) (number "17" (effects (font (size 1 1))))) (pin passive line (at 12.7 -6.35 180) (length 2.54) (name "SHA" (effects (font (size 1 1)))) (number "18" (effects (font (size 1 1))))) (pin output line (at 12.7 -8.889999999999999 180) (length 2.54) (name "GHA" (effects (font (size 1 1)))) (number "19" (effects (font (size 1 1))))) (pin passive line (at 12.7 -11.429999999999998 180) (length 2.54) (name "BSTA" (effects (font (size 1 1)))) (number "20" (effects (font (size 1 1)))))) (property "Footprint" "drv8300dpwr:drv8300dpwr" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "https://www.ti.com/lit/ds/symlink/drv8300.pdf" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "MPN" "DRV8300DPWR" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Manufacturer" "Texas Instruments" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Wiki" "adom/drv8300dpwr" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes)))))
+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+  (symbol "DRV8300DPWR" (in_bom yes) (on_board yes)+    (property "Reference" "U" (at 0 15.24 0) (effects (font (size 1.27 1.27))))+    (property "Value" "DRV8300DPWR" (at 0 -17.78 0) (effects (font (size 1.27 1.27))))+    (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+    (symbol "DRV8300DPWR_0_1"+    (rectangle (start -12.70 12.70) (end 12.70 -15.24)+      (stroke (width 0.254) (type default)) (fill (type background)))+    )+    (symbol "DRV8300DPWR_1_1"+    (pin input line (at -17.78 10.16 0) (length 5.08)+      (name "INHA" (effects (font (size 1.27 1.27))))+      (number "1" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 7.62 0) (length 5.08)+      (name "INHB" (effects (font (size 1.27 1.27))))+      (number "2" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 5.08 0) (length 5.08)+      (name "INHC" (effects (font (size 1.27 1.27))))+      (number "3" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 2.54 0) (length 5.08)+      (name "INLA" (effects (font (size 1.27 1.27))))+      (number "4" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 0.00 0) (length 5.08)+      (name "INLB" (effects (font (size 1.27 1.27))))+      (number "5" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 -2.54 0) (length 5.08)+      (name "INLC" (effects (font (size 1.27 1.27))))+      (number "6" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 -5.08 0) (length 5.08)+      (name "GVDD" (effects (font (size 1.27 1.27))))+      (number "7" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 -7.62 0) (length 5.08)+      (name "GND" (effects (font (size 1.27 1.27))))+      (number "8" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at -17.78 -10.16 0) (length 5.08)+      (name "GLC" (effects (font (size 1.27 1.27))))+      (number "9" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at -17.78 -12.70 0) (length 5.08)+      (name "GLB" (effects (font (size 1.27 1.27))))+      (number "10" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at 17.78 10.16 180) (length 5.08)+      (name "BSTA" (effects (font (size 1.27 1.27))))+      (number "20" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at 17.78 7.62 180) (length 5.08)+      (name "GHA" (effects (font (size 1.27 1.27))))+      (number "19" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 5.08 180) (length 5.08)+      (name "SHA" (effects (font (size 1.27 1.27))))+      (number "18" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at 17.78 2.54 180) (length 5.08)+      (name "BSTB" (effects (font (size 1.27 1.27))))+      (number "17" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at 17.78 0.00 180) (length 5.08)+      (name "GHB" (effects (font (size 1.27 1.27))))+      (number "16" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 -2.54 180) (length 5.08)+      (name "SHB" (effects (font (size 1.27 1.27))))+      (number "15" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at 17.78 -5.08 180) (length 5.08)+      (name "BSTC" (effects (font (size 1.27 1.27))))+      (number "14" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at 17.78 -7.62 180) (length 5.08)+      (name "GHC" (effects (font (size 1.27 1.27))))+      (number "13" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 -10.16 180) (length 5.08)+      (name "SHC" (effects (font (size 1.27 1.27))))+      (number "12" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at 17.78 -12.70 180) (length 5.08)+      (name "GLA" (effects (font (size 1.27 1.27))))+      (number "11" (effects (font (size 1.27 1.27))))+    )+    )+  )+)
drv8300dpwr.lbr+69−75
@@ -50,34 +50,34 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description>Three-phase non-inverting gate driver, 5-20 V GVDD, 750 mA source / 1.5 A sink, integrated bootstrap diodes, TSSOP-20</description>+<description></description> <packages>-<package name="drv8300dpwr">-  <description>20 pads, 7.3 x 6.3 mm. Texas PW0020A TSSOP, 20 Pin</description>-  <smd name="1" x="-2.9000" y="2.9250" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="2" x="-2.9000" y="2.2750" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="3" x="-2.9000" y="1.6250" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="4" x="-2.9000" y="0.9750" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="5" x="-2.9000" y="0.3250" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="6" x="-2.9000" y="-0.3250" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="7" x="-2.9000" y="-0.9750" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="8" x="-2.9000" y="-1.6250" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="9" x="-2.9000" y="-2.2750" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="10" x="-2.9000" y="-2.9250" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="11" x="2.9000" y="-2.9250" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="12" x="2.9000" y="-2.2750" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="13" x="2.9000" y="-1.6250" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="14" x="2.9000" y="-0.9750" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="15" x="2.9000" y="-0.3250" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="16" x="2.9000" y="0.3250" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="17" x="2.9000" y="0.9750" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="18" x="2.9000" y="1.6250" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="19" x="2.9000" y="2.2750" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <smd name="20" x="2.9000" y="2.9250" dx="1.5000" dy="0.4500" layer="1" roundness="50"/>-  <polygon width="0.1200" layer="51">-    <vertex x="-3.9100" y="2.9300"/>-    <vertex x="-4.2400" y="2.6900"/>-    <vertex x="-4.2400" y="3.1700"/>+<package name="TSSOP-20_4.4x6.5mm_P0.65mm">+  <description>TSSOP-20, 4.4 x 6.5 mm, 0.65 mm pitch</description>+  <smd name="1" x="-2.8625" y="2.9250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="2" x="-2.8625" y="2.2750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="3" x="-2.8625" y="1.6250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="4" x="-2.8625" y="0.9750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="5" x="-2.8625" y="0.3250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="6" x="-2.8625" y="-0.3250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="7" x="-2.8625" y="-0.9750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="8" x="-2.8625" y="-1.6250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="9" x="-2.8625" y="-2.2750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="10" x="-2.8625" y="-2.9250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="11" x="2.8625" y="-2.9250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="12" x="2.8625" y="-2.2750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="13" x="2.8625" y="-1.6250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="14" x="2.8625" y="-0.9750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="15" x="2.8625" y="-0.3250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="16" x="2.8625" y="0.3250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="17" x="2.8625" y="0.9750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="18" x="2.8625" y="1.6250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="19" x="2.8625" y="2.2750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="20" x="2.8625" y="2.9250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-3.8600" y="2.9300"/>+    <vertex x="-4.1900" y="2.6900"/>+    <vertex x="-4.1900" y="3.1700"/>   </polygon>   <polygon width="0.1000" layer="51">     <vertex x="-1.2000" y="3.2500"/>@@ -86,51 +86,50 @@     <vertex x="-2.2000" y="-3.2500"/>     <vertex x="-2.2000" y="2.2500"/>   </polygon>-  <wire x1="-2.3100" y1="3.4100" x2="2.3100" y2="3.4100" width="0.1200" layer="51"/>-  <wire x1="2.3100" y1="-3.4100" x2="-2.3100" y2="-3.4100" width="0.1200" layer="51"/>-  <text x="0" y="4.275" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>-  <text x="0" y="-4.275" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+  <wire x1="-2.3100" y1="3.3850" x2="2.3100" y2="3.3850" width="0.1200" layer="21"/>+  <wire x1="2.3100" y1="-3.3850" x2="-2.3100" y2="-3.3850" width="0.1200" layer="21"/>+  <text x="0" y="4.262" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-4.262" size="1.27" layer="27" align="top-center">&gt;VALUE</text> </package> </packages> <symbols> <symbol name="DRV8300DPWR">-  <description>Three-phase non-inverting gate driver, 5-20 V GVDD, 750 mA source / 1.5 A sink, integrated bootstrap diodes, TSSOP-20</description>-  <wire x1="-10.16" y1="13.97" x2="10.16" y2="13.97" width="0.254" layer="94"/>-  <wire x1="10.16" y1="13.97" x2="10.16" y2="-13.97" width="0.254" layer="94"/>-  <wire x1="10.16" y1="-13.97" x2="-10.16" y2="-13.97" width="0.254" layer="94"/>-  <wire x1="-10.16" y1="-13.97" x2="-10.16" y2="13.97" width="0.254" layer="94"/>-  <text x="0.0000" y="16.5100" size="1.27" layer="95" align="center">&gt;NAME</text>-  <text x="0.0000" y="-16.5100" size="1.27" layer="96" align="center">&gt;VALUE</text>-  <pin name="INHA" x="-12.7" y="11.43" length="short" direction="in"/>-  <pin name="INHB" x="-12.7" y="8.89" length="short" direction="in"/>-  <pin name="INHC" x="-12.7" y="6.3500000000000005" length="short" direction="in"/>-  <pin name="INLA" x="-12.7" y="3.8100000000000005" length="short" direction="in"/>-  <pin name="INLB" x="-12.7" y="1.2700000000000014" length="short" direction="in"/>-  <pin name="INLC" x="-12.7" y="-1.2699999999999996" length="short" direction="in"/>-  <pin name="GVDD" x="-12.7" y="-3.8100000000000005" length="short" direction="pwr"/>-  <pin name="GND" x="-12.7" y="-6.35" length="short" direction="pwr"/>-  <pin name="GLC" x="-12.7" y="-8.889999999999999" length="short" direction="out"/>-  <pin name="GLB" x="-12.7" y="-11.429999999999998" length="short" direction="out"/>-  <pin name="GLA" x="12.7" y="11.43" length="short" direction="out" rot="R180"/>-  <pin name="SHC" x="12.7" y="8.89" length="short" direction="pas" rot="R180"/>-  <pin name="GHC" x="12.7" y="6.3500000000000005" length="short" direction="out" rot="R180"/>-  <pin name="BSTC" x="12.7" y="3.8100000000000005" length="short" direction="pas" rot="R180"/>-  <pin name="SHB" x="12.7" y="1.2700000000000014" length="short" direction="pas" rot="R180"/>-  <pin name="GHB" x="12.7" y="-1.2699999999999996" length="short" direction="out" rot="R180"/>-  <pin name="BSTB" x="12.7" y="-3.8100000000000005" length="short" direction="pas" rot="R180"/>-  <pin name="SHA" x="12.7" y="-6.35" length="short" direction="pas" rot="R180"/>-  <pin name="GHA" x="12.7" y="-8.889999999999999" length="short" direction="out" rot="R180"/>-  <pin name="BSTA" x="12.7" y="-11.429999999999998" length="short" direction="pas" rot="R180"/>+  <wire x1="-12.7" y1="12.7" x2="12.7" y2="12.7" width="0.254" layer="94"/>+  <wire x1="12.7" y1="12.7" x2="12.7" y2="-15.24" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-15.24" x2="-12.7" y2="-15.24" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-15.24" x2="-12.7" y2="12.7" width="0.254" layer="94"/>+  <text x="0.0000" y="15.2400" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-17.7800" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="INHA" x="-17.78" y="10.16" length="middle" direction="in"/>+  <pin name="INHB" x="-17.78" y="7.62" length="middle" direction="in"/>+  <pin name="INHC" x="-17.78" y="5.08" length="middle" direction="in"/>+  <pin name="INLA" x="-17.78" y="2.54" length="middle" direction="in"/>+  <pin name="INLB" x="-17.78" y="0" length="middle" direction="in"/>+  <pin name="INLC" x="-17.78" y="-2.54" length="middle" direction="in"/>+  <pin name="GVDD" x="-17.78" y="-5.08" length="middle" direction="pwr"/>+  <pin name="GND" x="-17.78" y="-7.62" length="middle" direction="pwr"/>+  <pin name="GLC" x="-17.78" y="-10.16" length="middle" direction="out"/>+  <pin name="GLB" x="-17.78" y="-12.7" length="middle" direction="out"/>+  <pin name="BSTA" x="17.78" y="10.16" length="middle" direction="out" rot="R180"/>+  <pin name="GHA" x="17.78" y="7.62" length="middle" direction="out" rot="R180"/>+  <pin name="SHA" x="17.78" y="5.08" length="middle" direction="in" rot="R180"/>+  <pin name="BSTB" x="17.78" y="2.54" length="middle" direction="out" rot="R180"/>+  <pin name="GHB" x="17.78" y="0" length="middle" direction="out" rot="R180"/>+  <pin name="SHB" x="17.78" y="-2.54" length="middle" direction="in" rot="R180"/>+  <pin name="BSTC" x="17.78" y="-5.08" length="middle" direction="out" rot="R180"/>+  <pin name="GHC" x="17.78" y="-7.62" length="middle" direction="out" rot="R180"/>+  <pin name="SHC" x="17.78" y="-10.16" length="middle" direction="in" rot="R180"/>+  <pin name="GLA" x="17.78" y="-12.7" length="middle" direction="out" rot="R180"/> </symbol> </symbols> <devicesets> <deviceset name="DRV8300DPWR" prefix="U">-  <description>Three-phase non-inverting gate driver, 5-20 V GVDD, 750 mA source / 1.5 A sink, integrated bootstrap diodes, TSSOP-20</description>+  <description></description>   <gates>     <gate name="G$1" symbol="DRV8300DPWR" x="0" y="0"/>   </gates>   <devices>-    <device name="" package="drv8300dpwr">+    <device name="" package="TSSOP-20_4.4x6.5mm_P0.65mm">       <connects>         <connect gate="G$1" pin="INHA" pad="1"/>         <connect gate="G$1" pin="INHB" pad="2"/>@@ -142,23 +141,18 @@         <connect gate="G$1" pin="GND" pad="8"/>         <connect gate="G$1" pin="GLC" pad="9"/>         <connect gate="G$1" pin="GLB" pad="10"/>-        <connect gate="G$1" pin="GLA" pad="11"/>-        <connect gate="G$1" pin="SHC" pad="12"/>-        <connect gate="G$1" pin="GHC" pad="13"/>-        <connect gate="G$1" pin="BSTC" pad="14"/>-        <connect gate="G$1" pin="SHB" pad="15"/>-        <connect gate="G$1" pin="GHB" pad="16"/>-        <connect gate="G$1" pin="BSTB" pad="17"/>-        <connect gate="G$1" pin="SHA" pad="18"/>-        <connect gate="G$1" pin="GHA" pad="19"/>         <connect gate="G$1" pin="BSTA" pad="20"/>+        <connect gate="G$1" pin="GHA" pad="19"/>+        <connect gate="G$1" pin="SHA" pad="18"/>+        <connect gate="G$1" pin="BSTB" pad="17"/>+        <connect gate="G$1" pin="GHB" pad="16"/>+        <connect gate="G$1" pin="SHB" pad="15"/>+        <connect gate="G$1" pin="BSTC" pad="14"/>+        <connect gate="G$1" pin="GHC" pad="13"/>+        <connect gate="G$1" pin="SHC" pad="12"/>+        <connect gate="G$1" pin="GLA" pad="11"/>       </connects>-      <technologies>-        <technology name="">-          <attribute name="MPN" value="DRV8300DPWR" constant="no"/>-          <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>-        </technology>-      </technologies>+      <technologies><technology name=""/></technologies>     </device>   </devices> </deviceset>
package.json+164−70
@@ -1,169 +1,263 @@ {   "slug": "drv8300dpwr",-  "title": "DRV8300DPWR - Three-Phase Gate Driver",-  "version": "1.0.2",+  "version": "1.0.3",   "type": "component",-  "description": "Three-phase non-inverting gate driver, 5-20 V GVDD, 750 mA source / 1.5 A sink, integrated bootstrap diodes, TSSOP-20.",-  "license": "CC-BY-SA-4.0",+  "description": "Texas Instruments Brushless DC (BLDC) Motor Driver, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",-    "kicad",+    "motor driver ics",     "drv8300dpwr",-    "tested-with:gpt"+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "drv8300dpwr.kicad_sym",+    "drv8300dpwr.kicad_mod",+    "drv8300dpwr.glb",+    "drv8300dpwr.step",+    "drv8300dpwr.lbr",+    "docs/hero.png",+    "docs/drv8300dpwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "drv8300dpwr-hero.glb",+    "drv8300dpwr-hero.overlay.json"   ],   "component": {     "mpn": "DRV8300DPWR",     "manufacturer": "Texas Instruments",-    "package": "Texas_PW0020A_TSSOP-20_4.4x6.5mm_P0.65mm",+    "package": "TSSOP-20",     "pin_count": 20,-    "category": "Power Management",+    "category": "Motor Driver ICs",+    "subcategory": "Brushless DC (BLDC) Motor Driver",     "datasheet": "https://www.ti.com/lit/ds/symlink/drv8300.pdf",-    "model_3d_path": "drv8300dpwr.glb",     "parts": {       "symbol": "drv8300dpwr.kicad_sym",       "footprint": "drv8300dpwr.kicad_mod",-      "model_3d": "drv8300dpwr-hero-footprint.glb",-      "model_3d_step": "drv8300dpwr.step",-      "lbr": "drv8300dpwr.lbr",-      "step": "drv8300dpwr-mpn.step"+      "model_3d": "drv8300dpwr-hero.glb",+      "model_3d_plain": "drv8300dpwr.glb",+      "model_3d_step": "drv8300dpwr-etched.step",+      "model_3d_step_plain": "drv8300dpwr.step",+      "lbr": "drv8300dpwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C3036056",+      "digikey": "296-DRV8300DPWRTR-ND",+      "mouser": "595-DRV8300DPWR"+    },+    "distributor_check": {+      "checked_at": "2026-11-16T23:56:32Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-DRV8300DPWRTR-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-DRV8300DPWR",+        "status": "found"+      }     },     "pins": [       {         "number": "1",         "name": "INHA",-        "type": "input"+        "type": "input",+        "description": "High-side gate driver control input that controls the output of the high-side gate driver."       },       {         "number": "2",         "name": "INHB",-        "type": "input"+        "type": "input",+        "description": "High-side gate driver control input that controls the output of the high-side gate driver."       },       {         "number": "3",         "name": "INHC",-        "type": "input"+        "type": "input",+        "description": "High-side gate driver control input that controls the output of the high-side gate driver."       },       {         "number": "4",         "name": "INLA",-        "type": "input"+        "type": "input",+        "description": "Low-side gate driver control input that controls the output of the low-side gate driver."       },       {         "number": "5",         "name": "INLB",-        "type": "input"+        "type": "input",+        "description": "Low-side gate driver control input that controls the output of the low-side gate driver."       },       {         "number": "6",         "name": "INLC",-        "type": "input"+        "type": "input",+        "description": "Low-side gate driver control input that controls the output of the low-side gate driver."       },       {         "number": "7",         "name": "GVDD",-        "type": "power_in"+        "type": "power_in",+        "description": "Gate driver power supply input; connect a X5R or X7R, GVDD-rated ceramic of at least 10 uF local capacitance between GVDD and GND."       },       {         "number": "8",         "name": "GND",-        "type": "power_in"+        "type": "power_in",+        "description": "Device ground."       },       {         "number": "9",         "name": "GLC",-        "type": "output"+        "type": "output",+        "description": "Low-side gate driver output; connect to the gate of the low-side power MOSFET."       },       {         "number": "10",         "name": "GLB",-        "type": "output"+        "type": "output",+        "description": "Low-side gate driver output; connect to the gate of the low-side power MOSFET."       },       {         "number": "11",         "name": "GLA",-        "type": "output"+        "type": "output",+        "description": "Low-side gate driver output; connect to the gate of the low-side power MOSFET."       },       {         "number": "12",         "name": "SHC",-        "type": "passive"+        "type": "input",+        "description": "High-side source sense input; connect to the high-side power MOSFET source."       },       {         "number": "13",         "name": "GHC",-        "type": "output"+        "type": "output",+        "description": "High-side gate driver output; connect to the gate of the high-side power MOSFET."       },       {         "number": "14",         "name": "BSTC",-        "type": "passive"+        "type": "output",+        "description": "Bootstrap output pin; connect capacitor between BSTC and SHC."       },       {         "number": "15",         "name": "SHB",-        "type": "passive"+        "type": "input",+        "description": "High-side source sense input; connect to the high-side power MOSFET source."       },       {         "number": "16",         "name": "GHB",-        "type": "output"+        "type": "output",+        "description": "High-side gate driver output; connect to the gate of the high-side power MOSFET."       },       {         "number": "17",         "name": "BSTB",-        "type": "passive"+        "type": "output",+        "description": "Bootstrap output pin; connect capacitor between BSTB and SHB."       },       {         "number": "18",         "name": "SHA",-        "type": "passive"+        "type": "input",+        "description": "High-side source sense input; connect to the high-side power MOSFET source."       },       {         "number": "19",         "name": "GHA",-        "type": "output"+        "type": "output",+        "description": "High-side gate driver output; connect to the gate of the high-side power MOSFET."       },       {         "number": "20",         "name": "BSTA",-        "type": "passive"+        "type": "output",+        "description": "Bootstrap output pin; connect capacitor between BSTA and SHA."       }     ],-    "viewer_3d": {-      "ground": false,-      "animate": false,-      "shadows": false,-      "tooltips": "authored"+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 10,+        "cost_usd": 0.0421,+        "at": "2026-11-16T23:56:22"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/drv8300.pdf",+        "pages": 35,+        "sha256": "bb467652a531335d",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }     },-    "reference_artwork": {-      "contract": "eda-component-hero",-      "footprint": "drv8300dpwr.kicad_mod",-      "pinMap": "hero-pin-map.json",-      "evidence": "drv8300dpwr-hero-footprint.overlay.json",-      "nonphysical": true,-      "boardUse": false-    }-  },-  "model_3d_path": "drv8300dpwr.glb",-  "dependencies": {},-  "hero": {-    "type": "image",-    "path": "drv8300dpwr-mpn.png"-  },-  "files": [-    "*.kicad_sym",-    "*.kicad_mod",-    "*.step",-    "*.glb",-    "*.lbr",-    "*.adom-lbr.json",-    "page.json",-    "README.md",-    "docs/**"-  ],-  "discovery_triggers": [-    "DRV8300DPWR",-    "Three-phase non-inverting gate driver, 5-20 V GVDD, 750 mA source / 1.5 A sink, integrated bootstrap diodes, TSSOP-20.",-    "Three-Phase Gate Driver"-  ]-}\ No newline at end of file+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "drv8300dpwr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          6.5,+          1.2+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",+        "checked": "2026-11-16",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "drv8300dpwr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          6.5,+          1.2+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a63766f9e3da6071f9a5679cc885df1ce4b4a55283ffdcd042e7eb2079451f75",+        "checked": "2026-11-16",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  }+}
page.json+164−44
@@ -2,147 +2,245 @@   "schema_version": 1,   "slug": "drv8300dpwr",   "title": "DRV8300DPWR - Three-Phase Gate Driver",-  "version": "1.0.2",+  "version": "1.0.3",   "type": "component",   "license": "CC-BY-SA-4.0",   "tags": [     "component",-    "kicad",+    "motor driver ics",     "drv8300dpwr",-    "tested-with:gpt"+    "factory-2.0.0",+    "extractor-text"   ],   "component": {     "mpn": "DRV8300DPWR",     "manufacturer": "Texas Instruments",-    "package": "Texas_PW0020A_TSSOP-20_4.4x6.5mm_P0.65mm",+    "package": "TSSOP-20",     "pin_count": 20,-    "category": "Power Management",+    "category": "Motor Driver ICs",+    "subcategory": "Brushless DC (BLDC) Motor Driver",     "datasheet": "https://www.ti.com/lit/ds/symlink/drv8300.pdf",-    "model_3d_path": "drv8300dpwr.glb",     "parts": {       "symbol": "drv8300dpwr.kicad_sym",       "footprint": "drv8300dpwr.kicad_mod",-      "model_3d": "drv8300dpwr-hero-footprint.glb",-      "model_3d_step": "drv8300dpwr.step",-      "lbr": "drv8300dpwr.lbr",-      "step": "drv8300dpwr-mpn.step"+      "model_3d": "drv8300dpwr-hero.glb",+      "model_3d_plain": "drv8300dpwr.glb",+      "model_3d_step": "drv8300dpwr-etched.step",+      "model_3d_step_plain": "drv8300dpwr.step",+      "lbr": "drv8300dpwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C3036056",+      "digikey": "296-DRV8300DPWRTR-ND",+      "mouser": "595-DRV8300DPWR"+    },+    "distributor_check": {+      "checked_at": "2026-11-16T23:56:32Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-DRV8300DPWRTR-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-DRV8300DPWR",+        "status": "found"+      }     },     "pins": [       {         "number": "1",         "name": "INHA",-        "type": "input"+        "type": "input",+        "description": "High-side gate driver control input that controls the output of the high-side gate driver."       },       {         "number": "2",         "name": "INHB",-        "type": "input"+        "type": "input",+        "description": "High-side gate driver control input that controls the output of the high-side gate driver."       },       {         "number": "3",         "name": "INHC",-        "type": "input"+        "type": "input",+        "description": "High-side gate driver control input that controls the output of the high-side gate driver."       },       {         "number": "4",         "name": "INLA",-        "type": "input"+        "type": "input",+        "description": "Low-side gate driver control input that controls the output of the low-side gate driver."       },       {         "number": "5",         "name": "INLB",-        "type": "input"+        "type": "input",+        "description": "Low-side gate driver control input that controls the output of the low-side gate driver."       },       {         "number": "6",         "name": "INLC",-        "type": "input"+        "type": "input",+        "description": "Low-side gate driver control input that controls the output of the low-side gate driver."       },       {         "number": "7",         "name": "GVDD",-        "type": "power_in"+        "type": "power_in",+        "description": "Gate driver power supply input; connect a X5R or X7R, GVDD-rated ceramic of at least 10 uF local capacitance between GVDD and GND."       },       {         "number": "8",         "name": "GND",-        "type": "power_in"+        "type": "power_in",+        "description": "Device ground."       },       {         "number": "9",         "name": "GLC",-        "type": "output"+        "type": "output",+        "description": "Low-side gate driver output; connect to the gate of the low-side power MOSFET."       },       {         "number": "10",         "name": "GLB",-        "type": "output"+        "type": "output",+        "description": "Low-side gate driver output; connect to the gate of the low-side power MOSFET."       },       {         "number": "11",         "name": "GLA",-        "type": "output"+        "type": "output",+        "description": "Low-side gate driver output; connect to the gate of the low-side power MOSFET."       },       {         "number": "12",         "name": "SHC",-        "type": "passive"+        "type": "input",+        "description": "High-side source sense input; connect to the high-side power MOSFET source."       },       {         "number": "13",         "name": "GHC",-        "type": "output"+        "type": "output",+        "description": "High-side gate driver output; connect to the gate of the high-side power MOSFET."       },       {         "number": "14",         "name": "BSTC",-        "type": "passive"+        "type": "output",+        "description": "Bootstrap output pin; connect capacitor between BSTC and SHC."       },       {         "number": "15",         "name": "SHB",-        "type": "passive"+        "type": "input",+        "description": "High-side source sense input; connect to the high-side power MOSFET source."       },       {         "number": "16",         "name": "GHB",-        "type": "output"+        "type": "output",+        "description": "High-side gate driver output; connect to the gate of the high-side power MOSFET."       },       {         "number": "17",         "name": "BSTB",-        "type": "passive"+        "type": "output",+        "description": "Bootstrap output pin; connect capacitor between BSTB and SHB."       },       {         "number": "18",         "name": "SHA",-        "type": "passive"+        "type": "input",+        "description": "High-side source sense input; connect to the high-side power MOSFET source."       },       {         "number": "19",         "name": "GHA",-        "type": "output"+        "type": "output",+        "description": "High-side gate driver output; connect to the gate of the high-side power MOSFET."       },       {         "number": "20",         "name": "BSTA",-        "type": "passive"+        "type": "output",+        "description": "Bootstrap output pin; connect capacitor between BSTA and SHA."       }     ],-    "viewer_3d": {-      "ground": false,-      "animate": false,-      "shadows": false,-      "tooltips": "authored"+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 10,+        "cost_usd": 0.0421,+        "at": "2026-11-16T23:56:22"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/drv8300.pdf",+        "pages": 35,+        "sha256": "bb467652a531335d",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }     },-    "reference_artwork": {-      "contract": "eda-component-hero",-      "footprint": "drv8300dpwr.kicad_mod",-      "pinMap": "hero-pin-map.json",-      "evidence": "drv8300dpwr-hero-footprint.overlay.json",-      "nonphysical": true,-      "boardUse": false-    }+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "drv8300dpwr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          6.5,+          1.2+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",+        "checked": "2026-11-16",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "drv8300dpwr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          6.5,+          1.2+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "a63766f9e3da6071f9a5679cc885df1ce4b4a55283ffdcd042e7eb2079451f75",+        "checked": "2026-11-16",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "model_3d_path": "drv8300dpwr.glb",   "hero": {@@ -154,5 +252,27 @@     "DRV8300DPWR",     "Three-phase non-inverting gate driver, 5-20 V GVDD, 750 mA source / 1.5 A sink, integrated bootstrap diodes, TSSOP-20.",     "Three-Phase Gate Driver"-  ]+  ],+  "description": "Texas Instruments Brushless DC (BLDC) Motor Driver, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "dependencies": {},+  "files": [+    "page.json",+    "README.md",+    "drv8300dpwr.kicad_sym",+    "drv8300dpwr.kicad_mod",+    "drv8300dpwr.glb",+    "drv8300dpwr.step",+    "drv8300dpwr.lbr",+    "docs/hero.png",+    "docs/drv8300dpwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "drv8300dpwr-hero.glb",+    "drv8300dpwr-hero.overlay.json"+  ],+  "visibility": "private",+  "org": "adom",+  "author": {+    "name": "AdityaAngajala"+  } }\ No newline at end of file
viewers/footprint.htmladded+1
@@ -0,0 +1 @@+<!doctype html><title>drv8300dpwr</title>\ No newline at end of file
viewers/symbol.htmladded+1
@@ -0,0 +1 @@+<!doctype html><title>drv8300dpwr</title>\ No newline at end of file