3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownDRV8300DPWR
Texas Instruments · Brushless DC (BLDC) Motor Driver · TSSOP-20
DRV8300DPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INHA | input | High-side gate driver control input that controls the output of the high-side gate driver. |
| 2 | INHB | input | High-side gate driver control input that controls the output of the high-side gate driver. |
| 3 | INHC | input | High-side gate driver control input that controls the output of the high-side gate driver. |
| 4 | INLA | input | Low-side gate driver control input that controls the output of the low-side gate driver. |
| 5 | INLB | input | Low-side gate driver control input that controls the output of the low-side gate driver. |
| 6 | INLC | input | Low-side gate driver control input that controls the output of the low-side gate driver. |
| 7 | GVDD | power_in | Gate driver power supply input; connect a X5R or X7R, GVDD-rated ceramic of at least 10 uF local capacitance between GVDD and GND. |
| 8 | GND | power_in | Device ground. |
| 9 | GLC | output | Low-side gate driver output; connect to the gate of the low-side power MOSFET. |
| 10 | GLB | output | Low-side gate driver output; connect to the gate of the low-side power MOSFET. |
| 11 | GLA | output | Low-side gate driver output; connect to the gate of the low-side power MOSFET. |
| 12 | SHC | input | High-side source sense input; connect to the high-side power MOSFET source. |
| 13 | GHC | output | High-side gate driver output; connect to the gate of the high-side power MOSFET. |
| 14 | BSTC | output | Bootstrap output pin; connect capacitor between BSTC and SHC. |
| 15 | SHB | input | High-side source sense input; connect to the high-side power MOSFET source. |
| 16 | GHB | output | High-side gate driver output; connect to the gate of the high-side power MOSFET. |
| 17 | BSTB | output | Bootstrap output pin; connect capacitor between BSTB and SHB. |
| 18 | SHA | input | High-side source sense input; connect to the high-side power MOSFET source. |
| 19 | GHA | output | High-side gate driver output; connect to the gate of the high-side power MOSFET. |
| 20 | BSTA | output | Bootstrap output pin; connect capacitor between BSTA and SHA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Motor Driver ICs |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Gate driver regulator pin voltage GVDD | -0.3 | 21.5 | V | 6 | |||
| Bootstrap pin voltage BSTx | -0.3 | 125 | V | 6 | |||
| Bootstrap pin voltage BSTx with respect to SHx | -0.3 | 21.5 | V | 6 | |||
| Logic pin voltage INHx, INLx, MODE, DT | -0.3 | V | max printed as VGVDD+0.3 | 6 | |||
| High-side gate drive pin voltage GHx | -22 | 125 | V | 6 | |||
| High-side gate drive pin voltage GHx with respect to SHx | -0.3 | 22 | V | 6 | |||
| Transient 500-ns high-side gate drive pin voltage GHx with respect to SHx | -5 | 22 | V | Transient 500-ns | 6 | ||
| Low-side gate drive pin voltage GLx | -0.3 | V | max printed as VGVDD+0.3 | 6 | |||
| Transient 500-ns low-side gate drive pin voltage GLx | -5 | V | Transient 500-ns; max printed as VGVDD+0.3 | 6 | |||
| High-side source pin voltage SHx | -22 | 110 | V | 6 | |||
| Ambient temperature TA | -40 | 125 | °C | 6 | |||
| Junction temperature TJ | -40 | 150 | °C | 6 | |||
| Storage temperature Tstg | -65 | 150 | °C | 6 | |||
| Gate driver supply voltage GVDD | VGVDD | 5 | 20 | V | 6 | ||
| High-side source pin voltage SHx | VSHx | -2 | 85 | V | 6 | ||
| Transient 2µs high-side source pin voltage SHx | VSHx | -22 | 85 | V | Transient 2µs | 6 | |
| Bootstrap pin voltage BSTx | VBST | 5 | 105 | V | 6 | ||
| Bootstrap pin voltage BSTx with respect to SHx | VBST | 5 | 20 | V | 6 | ||
| Logic input voltage INHx, INLx, MODE, DT | VIN | 0 | V | max printed as GVDD | 6 | ||
| PWM frequency INHx, INLx | fPWM | 0 | 200 | kHz | 6 | ||
| Slew rate on SHx pin (DRV8300D and DRV8300DI) | VSHSL | 2 | V/ns | DRV8300D and DRV8300DI | 6 | ||
| Capacitor between BSTx and SHx (DRV8300D and DRV8300DI) | CBOOT | 1 | µF | DRV8300D and DRV8300DI | 6 | ||
| Operating ambient temperature TA | TA | -40 | 125 | °C | 6 | ||
| Operating junction temperature TJ | TJ | -40 | 150 | °C | 7 | ||
| GVDD standby mode current | IGVDD | 400 | 800 | 1400 | µA | INHx = INLX = 0; VBSTx = VGVDD | 7 |
| GVDD active mode current | IGVDD | 400 | 825 | 1400 | µA | INHx = INLX = Switching @20kHz; VBSTx = VGVDD; NO FETs connected | 7 |
| Bootstrap pin leakage current | ILBSx | 2 | 4 | 7 | µA | VBSTx = VSHx = 85V; VGVDD = 0V | 7 |
| Bootstrap pin active mode transient leakage current | ILBS_TRAN | 30 | 105 | 220 | µA | INHx = Switching@20kHz | 7 |
| Bootstrap pin active mode leakage static current | ILBS_DC | 30 | 85 | 150 | µA | INHx = High | 7 |
| High-side source pin leakage current | ILSHx | 30 | 55 | 80 | µA | INHx = INLX = 0; VBSTx - VSHx = 12V; VSHx = 0 to 85V | 7 |
| Input logic low voltage INLx, INHx pins | VIL | 0.8 | V | INLx, INHx pins | 7 | ||
| Input logic high voltage INLx, INHx pins | VIH | 2 | V | INLx, INHx pins | 7 | ||
| High-side gate drive low level voltage | VGHx_LO | 0 | 0.15 | 0.35 | V | IGLx = -100 mA; VGVDD = 12V; No FETs connected | 8 |
| High-side gate drive high level voltage (VBSTx - VGHx) | VGHx_HI | 0.3 | 0.6 | 1.2 | V | IGHx = 100 mA; VGVDD = 12V; No FETs connected | 8 |
| High-side peak source gate current | IDRIVEP_HS | 400 | 750 | 1200 | mA | GHx-SHx = 12V | 8 |
| High-side peak sink gate current | IDRIVEN_HS | 850 | 1500 | 2100 | mA | GHx-SHx = 0V | 8 |
| Low-side peak source gate current | IDRIVEP_LS | 400 | 750 | 1200 | mA | GLx = 12V | 8 |
| Low-side peak sink gate current | IDRIVEN_LS | 850 | 1500 | 2100 | mA | GLx = 0V | 8 |
| Input to output propagation delay | tPD | 70 | 125 | 180 | ns | INHx, INLx to GHx, GLx; VGVDD = VBSTx - VSHx > 8V; SHx = 0V, No load on GHx and GLx | 8 |
| Matching propagation delay per phase | tPD_match | -30 | 4 | 30 | ns | GHx turning OFF to GLx turning ON, GLx turning OFF to GHx turning ON; VGVDD = VBSTx - VSHx > 8V; SHx = 0V, No load on GHx and GLx | 8 |
| Matching propagation delay phase to phase | tPD_match | -30 | 4 | 30 | ns | GHx/GLx turning ON to GHy/GLy turning ON, GHx/GLx turning OFF to GHy/GLy turning OFF; VGVDD = VBSTx - VSHx > 8V; SHx = 0V, No load on GHx and GLx | 8 |
| GLx rise time (10% to 90%) | tR_GLx | 10 | 24 | 50 | ns | CLOAD = 1000 pF; VGVDD = VBSTx - VSHx > 8V; SHx = 0V | 8 |
| GHx rise time (10% to 90%) | tR_GHx | 10 | 24 | 50 | ns | CLOAD = 1000 pF; VGVDD = VBSTx - VSHx > 8V; SHx = 0V | 8 |
| GLx fall time (90% to 10%) | tF_GLx | 5 | 12 | 30 | ns | CLOAD = 1000 pF; VGVDD = VBSTx - VSHx > 8V; SHx = 0V | 8 |
| GHx fall time (90% to 10%) | tF_GHx | 5 | 12 | 30 | ns | CLOAD = 1000 pF; VGVDD = VBSTx - VSHx > 8V; SHx = 0V | 8 |
| Gate drive dead time | tDEAD | 150 | 215 | 280 | ns | DT pin floating | 8 |
| Minimum input pulse width on INHx, INLx that changes the output on GHx, GLx | tPW_MIN | 40 | 70 | 150 | ns | 8 | |
| Bootstrap diode forward voltage | VBOOTD | 0.45 | 0.7 | 0.85 | V | IBOOT = 100 µA | 8 |
| Bootstrap diode forward voltage | VBOOTD | 2 | 2.3 | 3.1 | V | IBOOT = 100 mA | 8 |
| Bootstrap dynamic resistance (ΔVBOOTD/ΔIBOOT) | RBOOTD | 11 | 15 | 25 | Ω | IBOOT = 100 mA and 80 mA | 8 |
| Gate Driver Supply undervoltage lockout (GVDDUV) supply rising | VGVDDUV | 4.45 | 4.6 | 4.7 | V | Supply rising | 8 |
| Gate Driver Supply undervoltage lockout (GVDDUV) supply falling | VGVDDUV | 4.2 | 4.35 | 4.4 | V | Supply falling | 8 |
| Gate Driver Supply UV hysteresis | VGVDDUV_HYS | 250 | 280 | 310 | mV | Rising to falling threshold | 8 |
| Boot Strap undervoltage lockout (VBSTx - VSHx) supply rising | VBSTUV | 3.6 | 4.2 | 4.8 | V | Supply rising | 9 |
| Boot Strap undervoltage lockout (VBSTx - VSHx) supply falling | VBSTUV | 3.5 | 4 | 4.5 | V | Supply falling | 9 |
| Junction-to-ambient thermal resistance | RθJA | 97.4 | °C/W | PW (TSSOP) 20 pins | 7 | ||
| Junction-to-board thermal resistance | RθJB | 48.8 | °C/W | PW (TSSOP) 20 pins | 7 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 38.3 | °C/W | PW (TSSOP) 20 pins | 7 | ||
| Junction-to-top characterization parameter | ΨJT | 4.3 | °C/W | PW (TSSOP) 20 pins | 7 | ||
| Junction-to-board characterization parameter | ΨJB | 48.4 | °C/W | PW (TSSOP) 20 pins | 7 |
CAD (KiCad official)
- Symbol:
DRV8300DPWR - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
drv8300dpwr-etched.step/drv8300dpwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);drv8300dpwr.step/drv8300dpwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
bb467652a531335d, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).