component
DRV5032FCLPG
Public Made by Adomby adom
Texas Instruments Hall Switches, TO-92. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDRV5032FCLPG
Texas Instruments · Hall Switches · TO-92
DRV5032FCLPG from Texas Instruments, in a TO-92. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage input 1.65V to 5.5V; TI recommends connecting to ceramic capacitor of at least 0.1µF to ground. |
| 2 | GND | power_in | Ground reference. |
| 3 | OUT | tri_state | Open-drain output responding to north and south magnetic poles; pulls low above BOP operating point (±3mT typical), releases to high-impedance below BRP (±1.5mT typical); external pull-up resistor required. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-92 |
| Category | Magnetic Sensors |
| Pins | 3 |
CAD (KiCad official)
- Symbol:
DRV5032FCLPG - Footprint:
Package_TO_SOT_THT:TO-92_Inline - 3D model: TO-92 (KiCad packages3D, STEP)
- 3D model files:
drv5032fclpg-etched.step/drv5032fclpg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);drv5032fclpg.step/drv5032fclpg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
4bd08523006e124f, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).