DRV110APWR

{
  "schema_version": 1,
  "type": "component",
  "slug": "drv110apwr",
  "title": "DRV110APWR",
  "brief": "Texas Instruments Relay / Coil Drivers, TSSOP-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "motor driver ics",
    "drv110apwr"
  ],
  "component": {
    "mpn": "DRV110APWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-14",
    "pin_count": 8,
    "category": "Motor Driver ICs",
    "subcategory": "Relay / Coil Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/drv110",
    "parts": {
      "symbol": "drv110apwr.kicad_sym",
      "footprint": "drv110apwr.kicad_mod",
      "model_3d": "drv110apwr-etched.glb",
      "model_3d_plain": "drv110apwr.glb",
      "model_3d_step": "drv110apwr-etched.step",
      "model_3d_step_plain": "drv110apwr.step",
      "lbr": "drv110apwr.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "KEEP",
        "type": "input",
        "description": "Keep time set. External capacitor to GND programs the duration the device stays in peak-current mode before transitioning to hold mode."
      },
      {
        "number": "2",
        "name": "PEAK",
        "type": "input",
        "description": "Peak current set. External resistor to GND sets the solenoid peak current threshold reference used during the initial pull-in phase."
      },
      {
        "number": "3",
        "name": "OSC",
        "type": "input",
        "description": "PWM frequency set. External resistor to GND programs the internal PWM oscillator frequency (typ. R_OSC 50 kΩ to 160 kΩ range)."
      },
      {
        "number": "4",
        "name": "VIN",
        "type": "power_in",
        "description": "6 V to 15 V supply input. Powers the device; internal Zener clamps VIN to V_ZENER so it can be fed from higher rails through an external series resistor R_S."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground. All voltages are referenced to this pin."
      },
      {
        "number": "6",
        "name": "SENSE",
        "type": "input",
        "description": "Solenoid current sense input. Connects to the external low-side R_SENSE resistor to monitor the solenoid current for peak/hold regulation."
      },
      {
        "number": "7",
        "name": "OUT",
        "type": "output",
        "description": "Solenoid switch gate drive. Drives the gate of the external N-channel MOSFET that switches the solenoid current. Rated up to 20 V."
      },
      {
        "number": "8",
        "name": "EN",
        "type": "input",
        "description": "Enable input. Logic-level control that turns the device on/off; also participates in UVLO behavior."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/drv110",
        "pages": 30,
        "sha256": "e9185f7c896fde38",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "drv110apwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "drv110apwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "c73ce1deec1f35cbaedc481d3e2e649ecb48e747b8b08666c9c8020e30f644c4",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-14",
      "Category": "Motor Driver ICs",
      "Pins": "8"
    }
  },
  "variants": [
    {
      "mpn": "DRV110APWR",
      "kind": "packaging"
    },
    {
      "mpn": "DRV110APWRAPW14R",
      "kind": "packaging"
    },
    {
      "mpn": "DRV110APWRAPW14",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "drv110apwr"
  ],
  "discovery_pitch": "DRV110APWR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "drv110apwr.kicad_sym",
    "drv110apwr.kicad_mod",
    "drv110apwr.glb",
    "drv110apwr.step",
    "drv110apwr.lbr",
    "docs/hero.png",
    "docs/drv110apwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-24T19:54:37.802Z"
}