← Commit history

drv104pwp: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·d172ed6a8b · ·parent 676d641
2 files changed +92−12
package.json+50−10
@@ -67,13 +67,13 @@         "number": "1",         "name": "Duty Cycle Adj",         "type": "input",-        "description": "Analog input connected to comparator input and 2.75\u00d7IREF current source that linearly sets PWM duty cycle; active range 1.3V to 3.9V corresponds to 10% to 90% duty cycle."+        "description": "Analog input connected to comparator input and 2.75×IREF current source that linearly sets PWM duty cycle; active range 1.3V to 3.9V corresponds to 10% to 90% duty cycle."       },       {         "number": "2",         "name": "Delay Adj",         "type": "input",-        "description": "Controls duration of initial 100% duty cycle before PWM mode through charge to 2.6V threshold comparator; internally driven by 15\u00b5A current source from VS; floating pin limits delay to 18\u00b5s minimum."+        "description": "Controls duration of initial 100% duty cycle before PWM mode through charge to 2.6V threshold comparator; internally driven by 15µA current source from VS; floating pin limits delay to 18µs minimum."       },       {         "number": "3",@@ -85,7 +85,7 @@         "number": "4",         "name": "Master",         "type": "input",-        "description": "Logic input that selects master mode (floating/high, pulls to 5V internally via 15\u00b5A source) making SYNC an output, or slave mode (low) making SYNC an input."+        "description": "Logic input that selects master mode (floating/high, pulls to 5V internally via 15µA source) making SYNC an output, or slave mode (low) making SYNC an input."       },       {         "number": "5",@@ -97,13 +97,13 @@         "number": "6",         "name": "OUT1",         "type": "output",-        "description": "High-side power output from DMOS source connected to VPS with low on-resistance (0.45\u03a9 typical), saturation voltage 0.45V to 0.65V at 1A, current-limited to 1.2A typical."+        "description": "High-side power output from DMOS source connected to VPS with low on-resistance (0.45Ω typical), saturation voltage 0.45V to 0.65V at 1A, current-limited to 1.2A typical."       },       {         "number": "7",         "name": "OUT2",         "type": "output",-        "description": "High-side power output from DMOS source connected to VPS with low on-resistance (0.45\u03a9 typical), saturation voltage 0.45V to 0.65V at 1A, current-limited to 1.2A typical."+        "description": "High-side power output from DMOS source connected to VPS with low on-resistance (0.45Ω typical), saturation voltage 0.45V to 0.65V at 1A, current-limited to 1.2A typical."       },       {         "number": "8",@@ -133,19 +133,19 @@         "number": "12",         "name": "SYNC",         "type": "bidirectional",-        "description": "Synchronization output in master mode (0V to 4.2V, 100\u00b5A source with 1k\u03a9 output resistance) providing copy of power output state; input in slave mode with 2V switching threshold controlling power output."+        "description": "Synchronization output in master mode (0V to 4.2V, 100µA source with 1kΩ output resistance) providing copy of power output state; input in slave mode with 2V switching threshold controlling power output."       },       {         "number": "13",         "name": "Status OK Flag",         "type": "output",-        "description": "Open-drain active-low flag output that indicates over-temperature fault (junction \u2265160\u00b0C) or over-current condition; requires pull-up resistor and sinks up to 10mA typical."+        "description": "Open-drain active-low flag output that indicates over-temperature fault (junction ≥160°C) or over-current condition; requires pull-up resistor and sinks up to 10mA typical."       },       {         "number": "14",         "name": "Input",         "type": "input",-        "description": "TTL-compatible logic input with 1.8V switching threshold; device enabled when driven above 2.2V, disabled below 1.2V; input current typically 1\u00b5A at all logic levels."+        "description": "TTL-compatible logic input with 1.8V switching threshold; device enabled when driven above 2.2V, disabled below 1.2V; input current typically 1µA at all logic levels."       },       {         "number": "15",@@ -189,6 +189,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "drv104pwp.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.35,+          5.0,+          1.05+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "e73930af88609deacee2bde98223bb9da2411f0cebb494015de765f0df216789",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "drv104pwp-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.35,+          5.0,+          1.05+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "00939be0af5c2813ffc8d90483616094ce2dc6fc145ef22452c37d82f5ef2053",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -174,7 +174,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "drv104pwp.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.35,+          5.0,+          1.05+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "e73930af88609deacee2bde98223bb9da2411f0cebb494015de765f0df216789",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "drv104pwp-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.35,+          5.0,+          1.05+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "00939be0af5c2813ffc8d90483616094ce2dc6fc145ef22452c37d82f5ef2053",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -221,4 +261,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}