← Commit history

drv103u: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·274f219f09 · ·parent 637a7d3
2 files changed +87−7
package.json+45−5
@@ -53,13 +53,13 @@         "number": "1",         "name": "DUTY CYCLE ADJ",         "type": "passive",-        "description": "Connects internally to a comparator input and a 2.75\u00d7IREF current source from VS; a resistor, analog voltage, or D/A output from 1.3V to 3.9V sets PWM duty cycle from about 10% (1.5V) to 90% (3.56V)."+        "description": "Connects internally to a comparator input and a 2.75×IREF current source from VS; a resistor, analog voltage, or D/A output from 1.3V to 3.9V sets PWM duty cycle from about 10% (1.5V) to 90% (3.56V)."       },       {         "number": "2",         "name": "DELAY ADJ",         "type": "passive",-        "description": "Sets the initial 100% duty-cycle (DC) time before PWM mode begins via an external capacitor to ground; internally driven by a 3\u00b5A current source from VS into a 2.6V threshold comparator, floating gives ~18\u00b5s delay and tying to +5V gives <1\u00b5s delay."+        "description": "Sets the initial 100% duty-cycle (DC) time before PWM mode begins via an external capacitor to ground; internally driven by a 3µA current source from VS into a 2.6V threshold comparator, floating gives ~18µs delay and tying to +5V gives <1µs delay."       },       {         "number": "3",@@ -77,7 +77,7 @@         "number": "5",         "name": "OUT",         "type": "output",-        "description": "Drain of the low-side power DMOS switch (source grounded), rated up to 1.5A in this SO-8 package, with 0.5\u03a9 typical on-resistance, slew-rate-limited rise/fall and an internal ESD clamp diode (not for use as a flyback diode) to +VS."+        "description": "Drain of the low-side power DMOS switch (source grounded), rated up to 1.5A in this SO-8 package, with 0.5Ω typical on-resistance, slew-rate-limited rise/fall and an internal ESD clamp diode (not for use as a flyback diode) to +VS."       },       {         "number": "6",@@ -130,6 +130,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "drv103u.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "drv103u-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "90e5bca1f275bbb2b82fe28f2231403b00ef06e97f5fdf4bc3d377515be5f324",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -115,7 +115,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "drv103u.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "drv103u-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "90e5bca1f275bbb2b82fe28f2231403b00ef06e97f5fdf4bc3d377515be5f324",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -163,4 +203,4 @@     "public": true   },   "updated_at": "2026-09-24T19:54:29.940Z"-}\ No newline at end of file+}