← Commit history

Initial commit: component/dp83620sqx

Ray ·6beffb6254 ·
2 files changed +487
README.mdadded+85
@@ -0,0 +1,85 @@+# DP83620SQX++**Texas Instruments** · Ethernet Transceivers · WQFN-48-EP(7x7)++DP83620SQX from Texas Instruments, in a WQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | TX_CLK | output | 25 MHz Transmit clock output in 100 Mb/s mode or 2.5 MHz in 10 Mb/s mode with integrated 50 ohm termination. |+| 2 | TX_EN | input | MII Transmit Enable; active high input indicates presence of valid data on TXD[3:0] with internal pull-down. |+| 3 | TXD_0 | input | MII Transmit Data input bit 0; accepts data synchronous to TX_CLK (2.5 MHz in 10 Mb/s mode or 25 MHz in 100 Mb/s mode). |+| 4 | TXD_1 | input | MII Transmit Data input bit 1; accepts data synchronous to TX_CLK (2.5 MHz in 10 Mb/s mode or 25 MHz in 100 Mb/s mode). |+| 5 | TXD_2 | input | MII Transmit Data input bit 2; accepts data synchronous to TX_CLK (2.5 MHz in 10 Mb/s mode or 25 MHz in 100 Mb/s mode). |+| 6 | TXD_3 | input | MII Transmit Data input bit 3 with internal pull-down; accepts data synchronous to TX_CLK or RMII data on TXD[1]. |+| 7 | PWRDOWN/INTN | input | Power Down input (default) or Interrupt output with internal pull-up; assert low to enable power down mode or signal interrupt when INT_OE bit is set. |+| 8 | TCK | input | Test Clock input for JTAG interface with internal pull-up. |+| 9 | TDO | output | Test Data Output for JTAG interface. |+| 10 | TMS | input | Test Mode Select input for JTAG interface with internal pull-up. |+| 11 | TRST# | input | Active low Test Reset input for JTAG interface with internal pull-up. |+| 12 | TDI | input | Test Data Input for JTAG interface with internal pull-up. |+| 13 | RD- | bidirectional | Differential receive input (PMD Input Pair); usable as transmit output in Auto-MDIX mode or 100BASE-FX receive pair with 3.3 V bias requirement. |+| 14 | RD+ | bidirectional | Differential receive input (PMD Input Pair); usable as transmit output in Auto-MDIX mode or 100BASE-FX receive pair with 3.3 V bias requirement. |+| 15 | CD_VSS | power_in | Analog ground for Common Driver circuit. |+| 16 | TD- | bidirectional | Differential transmit output (PMD Output Pair) for 10BASE-T or 100BASE-TX; usable as receive input in Auto-MDIX mode or 100BASE-FX transmit pair with 3.3 V bias. |+| 17 | TD+ | bidirectional | Differential transmit output (PMD Output Pair) for 10BASE-T or 100BASE-TX; usable as receive input in Auto-MDIX mode or 100BASE-FX transmit pair with 3.3 V bias. |+| 18 | ANAVSS | power_in | Analog ground supply. |+| 19 | ANA33VDD | power_out | Analog VDD supply; 3.3 Volts ±0.3 V or 3.3 Volts ±10%. |+| 20 | VREF | power_in | Bias resistor connection point; connect 4.87 kΩ 1% resistor from VREF to GND. |+| 21 | CLK_OUT_EN | input | Clock Output Enable strapping pin with internal pull-down; high enables clock output on CLK_OUT at power-up. |+| 22 | PCF_EN | input | PHY Control Frame Enable strapping pin with internal pull-down; high allows device to respond to PHY Control Frames. |+| 23 | RESERVED | unconnected | Reserved pin; should not be connected to external logic or net for most implementations. |+| 24 | CLK_OUT | output | Configurable clock output providing 50 MHz RMII reference in Master Mode, 25 MHz Receive Clock in 100 Mb mode, or 25/50 MHz pass-through of X1 reference clock. |+| 25 | RESERVED | unconnected | Reserved pin; should not be connected to external logic or net for most implementations. |+| 26 | LED_ACT | output | Activity/Collision/Duplex LED output with internal pull-up; Mode 1 indicates activity, Mode 2/3 indicates collision detection or full-duplex status. |+| 27 | LED_SPEED/FX_SD | output | Speed/Fiber Signal Detect LED output with internal pull-up; ON at 100 Mb/s and OFF at 10 Mb/s, or serves as fiber signal detect input in 100BASE-FX mode. |+| 28 | LED_LINK | output | Link/Activity LED output with internal pull-up; indicates link status and optional transmit/receive activity based on LED mode configuration. |+| 29 | RESET_N | input | Active low Reset input with internal pull-up; assert low for minimum 1 µs to initialize all registers and strap options to default states. |+| 30 | MDIO | bidirectional | Management Data I/O; bidirectional serial management instruction/data signal requiring 1.5 kΩ pullup resistor or internal pullup via CDCTRL1 register bit 3. |+| 31 | MDC | input | Management Data Clock input; synchronous clock to MDIO interface with maximum 25 MHz rate and no minimum clock rate. |+| 32 | IO_VDD | power_out | I/O VDD supply; 3.3 Volts ±0.3 V, 3.3 Volts ±10%, or 2.5 Volts ±5%. |+| 33 | X2 | output | Crystal output; connects to external 25 MHz crystal resonator device or left unconnected if external CMOS oscillator is used. |+| 34 | X1 | input | Crystal/Oscillator input; primary 25 MHz ±50 ppm reference (or 50 MHz for RMII Slave) from external crystal resonator or CMOS-level oscillator source. |+| 35 | IO_CORE_VSS | power_in | Digital ground for core I/O circuits. |+| 36 | RESERVED | unconnected | Reserved pin; should not be connected to external logic or net for most implementations. |+| 37 | RESERVED | unconnected | Reserved pin; should not be connected to external logic or net for most implementations. |+| 38 | RX_CLK | output | 25 MHz MII Receive Clock output in 100 Mb/s mode or 2.5 MHz in 10 Mb/s mode with integrated 50 ohm termination. |+| 39 | RX_DV | output | MII Receive Data Valid output with internal pull-down; asserted high when valid data present on RXD[3:0] with integrated 50 ohm termination. |+| 40 | CRS/CRS_DV | output | MII Carrier Sense or RMII Carrier Sense/Receive Data Valid output with internal pull-up; asserts high for receive medium non-idle with 50 ohm termination. |+| 41 | RX_ER | output | MII Receive Error output with internal pull-up; asserted high synchronously to RX_CLK indicating invalid symbol detection with integrated 50 ohm termination. |+| 42 | COL | output | Collision Detect output with internal pull-up; asserts high for collision detection in half-duplex modes or heartbeat in 10 Mb half-duplex with 50 ohm termination. |+| 43 | RXD_3 | output | MII Receive Data output bit 3 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted. |+| 44 | RXD_2 | output | MII Receive Data output bit 2 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted. |+| 45 | RXD_1 | output | MII Receive Data output bit 1 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted. |+| 46 | RXD_0 | output | MII Receive Data output bit 0 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted. |+| 47 | IO_VSS | power_in | Digital ground. |+| 48 | IO_VDD | power_out | I/O VDD supply; 3.3 Volts ±0.3 V, 3.3 Volts ±10%, or 2.5 Volts ±5%. |+| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-48-EP(7x7) |+| Category | Interface |+| Pins | 49 |++## CAD (KiCad official)++- Symbol: `DP83620SQX`+- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`+- 3D model: WQFN-48-EP(7x7) (KiCad packages3D, STEP)+- 3D model files: `dp83620sqx-etched.step` / `dp83620sqx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `dp83620sqx.step` / `dp83620sqx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/dp83620) (108 pp, sha256 `2fb105d27fcfbe46`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/dp83620sqx-datasheet.pdf)
page.jsonadded+402
@@ -0,0 +1,402 @@+{+  "slug": "dp83620sqx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Ethernet Transceivers, WQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "dp83620sqx",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "dp83620sqx.kicad_sym",+    "dp83620sqx.kicad_mod",+    "dp83620sqx.glb",+    "dp83620sqx.step",+    "dp83620sqx.lbr",+    "docs/hero.png",+    "docs/dp83620sqx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "DP83620SQX",+    "manufacturer": "Texas Instruments",+    "package": "WQFN-48-EP(7x7)",+    "pin_count": 49,+    "category": "Interface",+    "subcategory": "Ethernet Transceivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/dp83620",+    "parts": {+      "symbol": "dp83620sqx.kicad_sym",+      "footprint": "dp83620sqx.kicad_mod",+      "model_3d": "dp83620sqx-etched.glb",+      "model_3d_plain": "dp83620sqx.glb",+      "model_3d_step": "dp83620sqx-etched.step",+      "model_3d_step_plain": "dp83620sqx.step",+      "lbr": "dp83620sqx.lbr"+    },+    "distributor_links": {+      "lcsc": "C962074"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T16:23:02Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": null,+        "status": "no match"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "TX_CLK",+        "type": "output",+        "description": "25 MHz Transmit clock output in 100 Mb/s mode or 2.5 MHz in 10 Mb/s mode with integrated 50 ohm termination."+      },+      {+        "number": "2",+        "name": "TX_EN",+        "type": "input",+        "description": "MII Transmit Enable; active high input indicates presence of valid data on TXD[3:0] with internal pull-down."+      },+      {+        "number": "3",+        "name": "TXD_0",+        "type": "input",+        "description": "MII Transmit Data input bit 0; accepts data synchronous to TX_CLK (2.5 MHz in 10 Mb/s mode or 25 MHz in 100 Mb/s mode)."+      },+      {+        "number": "4",+        "name": "TXD_1",+        "type": "input",+        "description": "MII Transmit Data input bit 1; accepts data synchronous to TX_CLK (2.5 MHz in 10 Mb/s mode or 25 MHz in 100 Mb/s mode)."+      },+      {+        "number": "5",+        "name": "TXD_2",+        "type": "input",+        "description": "MII Transmit Data input bit 2; accepts data synchronous to TX_CLK (2.5 MHz in 10 Mb/s mode or 25 MHz in 100 Mb/s mode)."+      },+      {+        "number": "6",+        "name": "TXD_3",+        "type": "input",+        "description": "MII Transmit Data input bit 3 with internal pull-down; accepts data synchronous to TX_CLK or RMII data on TXD[1]."+      },+      {+        "number": "7",+        "name": "PWRDOWN/INTN",+        "type": "input",+        "description": "Power Down input (default) or Interrupt output with internal pull-up; assert low to enable power down mode or signal interrupt when INT_OE bit is set."+      },+      {+        "number": "8",+        "name": "TCK",+        "type": "input",+        "description": "Test Clock input for JTAG interface with internal pull-up."+      },+      {+        "number": "9",+        "name": "TDO",+        "type": "output",+        "description": "Test Data Output for JTAG interface."+      },+      {+        "number": "10",+        "name": "TMS",+        "type": "input",+        "description": "Test Mode Select input for JTAG interface with internal pull-up."+      },+      {+        "number": "11",+        "name": "TRST#",+        "type": "input",+        "description": "Active low Test Reset input for JTAG interface with internal pull-up."+      },+      {+        "number": "12",+        "name": "TDI",+        "type": "input",+        "description": "Test Data Input for JTAG interface with internal pull-up."+      },+      {+        "number": "13",+        "name": "RD-",+        "type": "bidirectional",+        "description": "Differential receive input (PMD Input Pair); usable as transmit output in Auto-MDIX mode or 100BASE-FX receive pair with 3.3 V bias requirement."+      },+      {+        "number": "14",+        "name": "RD+",+        "type": "bidirectional",+        "description": "Differential receive input (PMD Input Pair); usable as transmit output in Auto-MDIX mode or 100BASE-FX receive pair with 3.3 V bias requirement."+      },+      {+        "number": "15",+        "name": "CD_VSS",+        "type": "power_in",+        "description": "Analog ground for Common Driver circuit."+      },+      {+        "number": "16",+        "name": "TD-",+        "type": "bidirectional",+        "description": "Differential transmit output (PMD Output Pair) for 10BASE-T or 100BASE-TX; usable as receive input in Auto-MDIX mode or 100BASE-FX transmit pair with 3.3 V bias."+      },+      {+        "number": "17",+        "name": "TD+",+        "type": "bidirectional",+        "description": "Differential transmit output (PMD Output Pair) for 10BASE-T or 100BASE-TX; usable as receive input in Auto-MDIX mode or 100BASE-FX transmit pair with 3.3 V bias."+      },+      {+        "number": "18",+        "name": "ANAVSS",+        "type": "power_in",+        "description": "Analog ground supply."+      },+      {+        "number": "19",+        "name": "ANA33VDD",+        "type": "power_out",+        "description": "Analog VDD supply; 3.3 Volts ±0.3 V or 3.3 Volts ±10%."+      },+      {+        "number": "20",+        "name": "VREF",+        "type": "power_in",+        "description": "Bias resistor connection point; connect 4.87 kΩ 1% resistor from VREF to GND."+      },+      {+        "number": "21",+        "name": "CLK_OUT_EN",+        "type": "input",+        "description": "Clock Output Enable strapping pin with internal pull-down; high enables clock output on CLK_OUT at power-up."+      },+      {+        "number": "22",+        "name": "PCF_EN",+        "type": "input",+        "description": "PHY Control Frame Enable strapping pin with internal pull-down; high allows device to respond to PHY Control Frames."+      },+      {+        "number": "23",+        "name": "RESERVED",+        "type": "unconnected",+        "description": "Reserved pin; should not be connected to external logic or net for most implementations."+      },+      {+        "number": "24",+        "name": "CLK_OUT",+        "type": "output",+        "description": "Configurable clock output providing 50 MHz RMII reference in Master Mode, 25 MHz Receive Clock in 100 Mb mode, or 25/50 MHz pass-through of X1 reference clock."+      },+      {+        "number": "25",+        "name": "RESERVED",+        "type": "unconnected",+        "description": "Reserved pin; should not be connected to external logic or net for most implementations."+      },+      {+        "number": "26",+        "name": "LED_ACT",+        "type": "output",+        "description": "Activity/Collision/Duplex LED output with internal pull-up; Mode 1 indicates activity, Mode 2/3 indicates collision detection or full-duplex status."+      },+      {+        "number": "27",+        "name": "LED_SPEED/FX_SD",+        "type": "output",+        "description": "Speed/Fiber Signal Detect LED output with internal pull-up; ON at 100 Mb/s and OFF at 10 Mb/s, or serves as fiber signal detect input in 100BASE-FX mode."+      },+      {+        "number": "28",+        "name": "LED_LINK",+        "type": "output",+        "description": "Link/Activity LED output with internal pull-up; indicates link status and optional transmit/receive activity based on LED mode configuration."+      },+      {+        "number": "29",+        "name": "RESET_N",+        "type": "input",+        "description": "Active low Reset input with internal pull-up; assert low for minimum 1 µs to initialize all registers and strap options to default states."+      },+      {+        "number": "30",+        "name": "MDIO",+        "type": "bidirectional",+        "description": "Management Data I/O; bidirectional serial management instruction/data signal requiring 1.5 kΩ pullup resistor or internal pullup via CDCTRL1 register bit 3."+      },+      {+        "number": "31",+        "name": "MDC",+        "type": "input",+        "description": "Management Data Clock input; synchronous clock to MDIO interface with maximum 25 MHz rate and no minimum clock rate."+      },+      {+        "number": "32",+        "name": "IO_VDD",+        "type": "power_out",+        "description": "I/O VDD supply; 3.3 Volts ±0.3 V, 3.3 Volts ±10%, or 2.5 Volts ±5%."+      },+      {+        "number": "33",+        "name": "X2",+        "type": "output",+        "description": "Crystal output; connects to external 25 MHz crystal resonator device or left unconnected if external CMOS oscillator is used."+      },+      {+        "number": "34",+        "name": "X1",+        "type": "input",+        "description": "Crystal/Oscillator input; primary 25 MHz ±50 ppm reference (or 50 MHz for RMII Slave) from external crystal resonator or CMOS-level oscillator source."+      },+      {+        "number": "35",+        "name": "IO_CORE_VSS",+        "type": "power_in",+        "description": "Digital ground for core I/O circuits."+      },+      {+        "number": "36",+        "name": "RESERVED",+        "type": "unconnected",+        "description": "Reserved pin; should not be connected to external logic or net for most implementations."+      },+      {+        "number": "37",+        "name": "RESERVED",+        "type": "unconnected",+        "description": "Reserved pin; should not be connected to external logic or net for most implementations."+      },+      {+        "number": "38",+        "name": "RX_CLK",+        "type": "output",+        "description": "25 MHz MII Receive Clock output in 100 Mb/s mode or 2.5 MHz in 10 Mb/s mode with integrated 50 ohm termination."+      },+      {+        "number": "39",+        "name": "RX_DV",+        "type": "output",+        "description": "MII Receive Data Valid output with internal pull-down; asserted high when valid data present on RXD[3:0] with integrated 50 ohm termination."+      },+      {+        "number": "40",+        "name": "CRS/CRS_DV",+        "type": "output",+        "description": "MII Carrier Sense or RMII Carrier Sense/Receive Data Valid output with internal pull-up; asserts high for receive medium non-idle with 50 ohm termination."+      },+      {+        "number": "41",+        "name": "RX_ER",+        "type": "output",+        "description": "MII Receive Error output with internal pull-up; asserted high synchronously to RX_CLK indicating invalid symbol detection with integrated 50 ohm termination."+      },+      {+        "number": "42",+        "name": "COL",+        "type": "output",+        "description": "Collision Detect output with internal pull-up; asserts high for collision detection in half-duplex modes or heartbeat in 10 Mb half-duplex with 50 ohm termination."+      },+      {+        "number": "43",+        "name": "RXD_3",+        "type": "output",+        "description": "MII Receive Data output bit 3 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted."+      },+      {+        "number": "44",+        "name": "RXD_2",+        "type": "output",+        "description": "MII Receive Data output bit 2 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted."+      },+      {+        "number": "45",+        "name": "RXD_1",+        "type": "output",+        "description": "MII Receive Data output bit 1 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted."+      },+      {+        "number": "46",+        "name": "RXD_0",+        "type": "output",+        "description": "MII Receive Data output bit 0 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted."+      },+      {+        "number": "47",+        "name": "IO_VSS",+        "type": "power_in",+        "description": "Digital ground."+      },+      {+        "number": "48",+        "name": "IO_VDD",+        "type": "power_out",+        "description": "I/O VDD supply; 3.3 Volts ±0.3 V, 3.3 Volts ±10%, or 2.5 Volts ±5%."+      },+      {+        "number": "49",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: DAP (Die Attach Pad) is listed as 'NC or GND' in datasheet; thermal connection to GND plane recommen",+          "exposed pad 49 added from the footprint"+        ],+        "pages_sent": 29,+        "cost_usd": 0.311,+        "at": "2026-10-01T16:22:44"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/dp83620",+        "pages": 108,+        "sha256": "2fb105d27fcfbe46",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 49,+        "described": 49,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file