DOT2110

{
  "slug": "dot2110",
  "version": "0.1.0",
  "type": "component",
  "description": "DOINGTER Gate Drivers, DIP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "dot2110",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "dot2110.kicad_sym",
    "dot2110.kicad_mod",
    "dot2110.glb",
    "dot2110.step",
    "dot2110.lbr",
    "docs/hero.png",
    "docs/dot2110-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "dot2110-hero.glb",
    "dot2110-hero.overlay.json",
    "dot2110-etched.glb"
  ],
  "component": {
    "mpn": "DOT2110",
    "manufacturer": "DOINGTER",
    "package": "DIP-14",
    "pin_count": 14,
    "category": "Motor Driver ICs",
    "subcategory": "Gate Drivers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/c96ea7afb3f040501fa28e1d6037ab4b.pdf",
    "parts": {
      "symbol": "dot2110.kicad_sym",
      "footprint": "dot2110.kicad_mod",
      "model_3d": "dot2110-hero.glb",
      "model_3d_plain": "dot2110-etched.glb",
      "model_3d_step": "dot2110-etched.step",
      "model_3d_step_plain": "dot2110.step",
      "lbr": "dot2110.lbr"
    },
    "distributor_links": {
      "lcsc": "C42441872"
    },
    "distributor_check": {
      "checked_at": "2026-10-15T09:20:13Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "LO",
        "type": "output",
        "description": "Low side gate drive output, referenced to COM, swings 0 to VCC with 2.5 A typ output short circuit pulsed current."
      },
      {
        "number": "2",
        "name": "COM",
        "type": "power_in",
        "description": "Low side return."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Low side fixed supply, recommended 10 V to 20 V (absolute max 25 V) with undervoltage lockout."
      },
      {
        "number": "4",
        "name": "NC",
        "type": "unconnected",
        "description": "No pin label is shown at this position on the DIP14 lead assignment drawing."
      },
      {
        "number": "5",
        "name": "VS",
        "type": "power_in",
        "description": "High side floating supply return, operates up to 500 V (DOT2110) or 600 V (DOT2113)."
      },
      {
        "number": "6",
        "name": "VB",
        "type": "power_in",
        "description": "High side floating supply, recommended VS + 10 V to VS + 20 V, absolute max 525 V (DOT2110) or 625 V (DOT2113)."
      },
      {
        "number": "7",
        "name": "HO",
        "type": "output",
        "description": "High side gate drive output, swings VS to VB."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "No pin label is shown at this position on the DIP14 lead assignment drawing."
      },
      {
        "number": "9",
        "name": "VDD",
        "type": "power_in",
        "description": "Logic supply, recommended VSS + 3 V to VSS + 20 V (absolute max VSS + 25 V)."
      },
      {
        "number": "10",
        "name": "HIN",
        "type": "input",
        "description": "Logic input for high side gate driver output HO, in phase, CMOS Schmitt-triggered with pull-down, VSS to VDD."
      },
      {
        "number": "11",
        "name": "SD",
        "type": "input",
        "description": "Logic input for shutdown, CMOS Schmitt-triggered with pull-down, VSS to VDD."
      },
      {
        "number": "12",
        "name": "LIN",
        "type": "input",
        "description": "Logic input for low side gate driver output LO, in phase, CMOS Schmitt-triggered with pull-down, VSS to VDD."
      },
      {
        "number": "13",
        "name": "VSS",
        "type": "power_in",
        "description": "Logic ground, offset of ±5 V relative to COM allowed."
      },
      {
        "number": "14",
        "name": "NC",
        "type": "unconnected",
        "description": "No pin label is shown at this position on the DIP14 lead assignment drawing."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text+vision",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pins 4, 8 and 14 are drawn without labels on the DIP14 lead assignment and the text defines no NC pi",
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 18,
        "cost_usd": 0.2415,
        "at": "2026-10-15T09:19:56"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/c96ea7afb3f040501fa28e1d6037ab4b.pdf",
        "pages": 18,
        "sha256": "8bc2c46a1a7f8646",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "dot2110.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          19.05,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3dae072a95c64bee0d1e58be8e75383639f5017ab982de1749d05808a4eed058",
        "checked": "2026-10-15",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "dot2110-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          19.05,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "fd3b9e8b00c38879690c36a709cb7afc9b0d9d649382452293a1961a2188ece4",
        "checked": "2026-10-15",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}