component
DK-SMF60A
Public Made by Adomby adom
GOODWORK ESD And Surge Protection (TVS/ESD), SOD-123FL. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
DK-SMF60A
GOODWORK · ESD And Surge Protection (TVS/ESD) · SOD-123FL
DK-SMF60A from GOODWORK, in a SOD-123FL. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode terminal, marked by the cathode band on this unidirectional device; connect to the protected line, with VRWM 60 V and breakdown 66.7 V min to 73.7 V max at 1 mA. |
| 2 | A | passive | Anode terminal opposite the cathode band, normally connected to ground, with max clamp voltage 96.8 V and 200 W peak pulse power (1 ms). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GOODWORK |
| Package | SOD-123FL |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Breakdown Voltage | VBR | 66.7 | 73.7 | V | @ IT | 3 | |
| Maximum Reverse Leakage Current | IR | 1 | µA | @ VRWM | 3 | ||
| Maximum Clamp Voltage | VC | 96.8 | V | @ IPP | 3 | ||
| Peak Pulse Current | IPP | 1.8 | A | 3 | |||
| Peak Power Dissipation | PPK | 200 | W | TA=25 C, TP=1ms (Minimum) | 1 | ||
| Peak Forward Surge Current | IFSM | 30 | A | 8.3ms single half sine-wave superimposed on rated load (JEDEC method) | 1 | ||
| Operating and Storage Temperature Range | TJ, TSTG | -55 | 150 | C | 1 | ||
| Reverse Stand-off Voltage | VRWM | 60 | V | 3 | |||
| Breakdown Test Current | IT | 1 | mA | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | 2. Mounted on Copper Pad area of 5.0mm (.013mm Thick) to each terminal. | 1 |
CAD (KiCad official)
- Symbol:
DK-SMF60A - Footprint:
Diode_SMD:D_SOD-123F - 3D model: SOD-123FL (KiCad packages3D, STEP)
- 3D model files:
dk-smf60a-etched.step/dk-smf60a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dk-smf60a.step/dk-smf60a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GOODWORK datasheet (6 pp, sha256
85a0f7ae4f28082c, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# DK-SMF60A
**GOODWORK** · ESD And Surge Protection (TVS/ESD) · SOD-123FL
DK-SMF60A from GOODWORK, in a SOD-123FL. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode terminal, marked by the cathode band on this unidirectional device; connect to the protected line, with VRWM 60 V and breakdown 66.7 V min to 73.7 V max at 1 mA. |
| 2 | A | passive | Anode terminal opposite the cathode band, normally connected to ground, with max clamp voltage 96.8 V and 200 W peak pulse power (1 ms). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GOODWORK |
| Package | SOD-123FL |
| Category | Circuit Protection |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Breakdown Voltage | VBR | 66.7 | | 73.7 | V | @ IT | 3 |
| Maximum Reverse Leakage Current | IR | | | 1 | µA | @ VRWM | 3 |
| Maximum Clamp Voltage | VC | | | 96.8 | V | @ IPP | 3 |
| Peak Pulse Current | IPP | | | 1.8 | A | | 3 |
| Peak Power Dissipation | PPK | 200 | | | W | TA=25 C, TP=1ms (Minimum) | 1 |
| Peak Forward Surge Current | IFSM | | | 30 | A | 8.3ms single half sine-wave superimposed on rated load (JEDEC method) | 1 |
| Operating and Storage Temperature Range | TJ, TSTG | -55 | | 150 | C | | 1 |
| Reverse Stand-off Voltage | VRWM | | 60 | | V | | 3 |
| Breakdown Test Current | IT | | 1 | | mA | | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | | 2. Mounted on Copper Pad area of 5.0mm (.013mm Thick) to each terminal. | 1 |
## CAD (KiCad official)
- Symbol: `DK-SMF60A`
- Footprint: `Diode_SMD:D_SOD-123F`
- 3D model: SOD-123FL (KiCad packages3D, STEP)
- 3D model files: `dk-smf60a-etched.step` / `dk-smf60a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `dk-smf60a.step` / `dk-smf60a.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [GOODWORK datasheet](docs/dk-smf60a-datasheet.pdf) (6 pp, sha256 `85a0f7ae4f28082c`, retrieved 2026-10-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/dk-smf60a-datasheet.pdf)