DIO6602ST6

{
  "schema_version": 1,
  "type": "component",
  "slug": "dio6602st6",
  "title": "DIO6602ST6",
  "brief": "DIOO DC-DC Converters, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "dio6602st6",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "DIO6602ST6",
    "manufacturer": "DIOO",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588911942069469184",
    "parts": {
      "symbol": "dio6602st6.kicad_sym",
      "footprint": "dio6602st6.kicad_mod",
      "model_3d": "dio6602st6-hero.glb",
      "model_3d_plain": "dio6602st6-etched.glb",
      "model_3d_step": "dio6602st6-etched.step",
      "model_3d_step_plain": "dio6602st6.step",
      "lbr": "dio6602st6.lbr"
    },
    "distributor_links": {
      "lcsc": "C444641",
      "mouser": "453-DIO6602ST6"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T09:15:01Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "error"
      },
      "mouser": {
        "pn": "453-DIO6602ST6",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SW",
        "type": "passive",
        "description": "Switch pin; connect the inductor between VIN and this pin (absolute maximum -0.3 to 6 V DC, -0.3 to 7 V pulsed <100 ns)."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground."
      },
      {
        "number": "3",
        "name": "/SHDN",
        "type": "input",
        "description": "Logic-controlled shutdown input; high = normal operation, low = IC shutdown."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Feedback input to the error amplifier; connect the resistor divider tap to this pin."
      },
      {
        "number": "5",
        "name": "VOUT",
        "type": "power_out",
        "description": "Output voltage sense and drain of the internal synchronous rectifier."
      },
      {
        "number": "6",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin (operates down to 0.7 V supply; application circuit shows 0.5-5 V input)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "vision",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pages 4-9 were not read; pinout is fully given on page 2 (Figure 1 and Pin Definitions), so the pin ",
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 9,
        "cost_usd": 0.2399,
        "at": "2026-10-19T09:11:26"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588911942069469184",
        "pages": 9,
        "sha256": "a97ed34f955e8347",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "dio6602st6.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "dio6602st6-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "75c22760f2043e9e8ef08863558de32e38ce6954c03d03eb11738e8d15563d17",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "DIOO",
      "Package": "SOT-23-6",
      "Category": "Power Management (PMIC)",
      "Pins": "6"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "dio6602st6"
  ],
  "discovery_pitch": "DIO6602ST6 (DIOO) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "dio6602st6.kicad_sym",
    "dio6602st6.kicad_mod",
    "dio6602st6.glb",
    "dio6602st6.step",
    "dio6602st6.lbr",
    "docs/hero.png",
    "docs/dio6602st6-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "dio6602st6-hero.glb",
    "dio6602st6-hero.overlay.json",
    "dio6602st6-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}