component
DIO6305BCST6
Public Made by Adomby adom
DIOO Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -32,7 +32,7 @@ "number": "1", "name": "SW", "type": "passive",- "description": "Boost and rectifying switch node. Connect the external boost inductor (typ. 4.7\u00b5H) between VCC and this pin. Internal power MOSFETs switch at 1.2MHz; switch current limit is typ. 1.1A."+ "description": "Boost and rectifying switch node. Connect the external boost inductor (typ. 4.7µH) between VCC and this pin. Internal power MOSFETs switch at 1.2MHz; switch current limit is typ. 1.1A." }, { "number": "2",@@ -44,25 +44,25 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable control. Pull high to turn the converter on; drive low to shut down (<1\u00b5A shutdown current). VIH \u2265 1.6V, VIL \u2264 0.4V (1.8V logic compatible). Do not float."+ "description": "Enable control. Pull high to turn the converter on; drive low to shut down (<1µA shutdown current). VIH ≥ 1.6V, VIL ≤ 0.4V (1.8V logic compatible). Do not float." }, { "number": "4", "name": "FB", "type": "input",- "description": "Output voltage feedback pin. Connect the mid-point of an external resistor divider from VOUT to GND here to program the output voltage. Regulation reference is 500mV (typ., 485-519mV). R2 recommended 100k\u03a9."+ "description": "Output voltage feedback pin. Connect the mid-point of an external resistor divider from VOUT to GND here to program the output voltage. Regulation reference is 500mV (typ., 485-519mV). R2 recommended 100kΩ." }, { "number": "5", "name": "VOUT", "type": "power_out",- "description": "Boost converter output. Connect the output filter capacitor (4.7\u00b5F-22\u00b5F ceramic, typ. 10\u00b5F) here. Adjustable up to 5.25V; output is internally clamped at ~6V. Provides true load disconnect during shutdown."+ "description": "Boost converter output. Connect the output filter capacitor (4.7µF-22µF ceramic, typ. 10µF) here. Adjustable up to 5.25V; output is internally clamped at ~6V. Provides true load disconnect during shutdown." }, { "number": "6", "name": "VCC", "type": "power_in",- "description": "Boost converter supply voltage input, 2.7V to 5.25V. Connect the input decoupling capacitor (\u226510\u00b5F ceramic) close to this pin. Also serves as the source side of the boost inductor path."+ "description": "Boost converter supply voltage input, 2.7V to 5.25V. Connect the input decoupling capacitor (≥10µF ceramic) close to this pin. Also serves as the source side of the boost inductor path." } ], "provenance": {@@ -132,5 +132,8 @@ "docs/dio6305bcst6-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }