component
DIO6305BCST6
Public Made by Adomby adom
DIOO Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDIO6305BCST6
DIOO · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-6
DIO6305BCST6 from DIOO, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | passive | Boost and rectifying switch node. Connect the external boost inductor (typ. 4.7µH) between VCC and this pin. Internal power MOSFETs switch at 1.2MHz; switch current limit is typ. 1.1A. |
| 2 | GND | power_in | Power ground. Return for the internal power MOSFETs and control circuitry. Should be connected to the system ground plane close to the input and output capacitors. |
| 3 | EN | input | Enable control. Pull high to turn the converter on; drive low to shut down (<1µA shutdown current). VIH ≥ 1.6V, VIL ≤ 0.4V (1.8V logic compatible). Do not float. |
| 4 | FB | input | Output voltage feedback pin. Connect the mid-point of an external resistor divider from VOUT to GND here to program the output voltage. Regulation reference is 500mV (typ., 485-519mV). R2 recommended 100kΩ. |
| 5 | VOUT | power_out | Boost converter output. Connect the output filter capacitor (4.7µF-22µF ceramic, typ. 10µF) here. Adjustable up to 5.25V; output is internally clamped at ~6V. Provides true load disconnect during shutdown. |
| 6 | VCC | power_in | Boost converter supply voltage input, 2.7V to 5.25V. Connect the input decoupling capacitor (≥10µF ceramic) close to this pin. Also serves as the source side of the boost inductor path. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | DIOO |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
DIO6305BCST6
CAD (KiCad official)
- Symbol:
DIO6305BCST6 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
dio6305bcst6-etched.step/dio6305bcst6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dio6305bcst6.step/dio6305bcst6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: DIOO datasheet (10 pp, sha256
403d983cf018071b, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).