component
DIO32220MP10
Public Made by Adomby adom
DIOO USB Converters, MSOP-10. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDIO32220MP10
DIOO · USB Converters · MSOP-10
DIO32220MP10 from DIOO, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Sel | input | Switch select input; logic-L connects D± to HSD1±, logic-H connects D± to HSD2±. |
| 2 | HSD1+ | bidirectional | High-speed differential data plus for multiplexed source port 1; switch I/O voltage 0 to 5.5 V. |
| 3 | HSD2+ | bidirectional | High-speed differential data plus for multiplexed source port 2; switch I/O voltage 0 to 5.5 V. |
| 4 | D+ | bidirectional | USB common data bus plus; connected to HSD1+ or HSD2+ depending on Sel, switch I/O voltage 0 to 5.5 V. |
| 5 | GND | power_in | Ground reference for supply and logic. |
| 6 | D- | bidirectional | USB common data bus minus; connected to HSD1- or HSD2- depending on Sel, switch I/O voltage 0 to 5.5 V. |
| 7 | HSD2- | bidirectional | High-speed differential data minus for multiplexed source port 2; switch I/O voltage 0 to 5.5 V. |
| 8 | HSD1- | bidirectional | High-speed differential data minus for multiplexed source port 1; switch I/O voltage 0 to 5.5 V. |
| 9 | /OE | input | Switch enable, active-low; logic-H disconnects all switch paths (Disconnect state), control input voltage 0 to VCC. |
| 10 | VCC | power_in | Supply voltage, 2.7 V to 5.5 V; quiescent current 1 µA typical. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | DIOO |
| Package | MSOP-10 |
| Category | Interface |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
DIO32220MP10 - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
dio32220mp10-etched.step/dio32220mp10-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dio32220mp10.step/dio32220mp10.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: DIOO datasheet (10 pp, sha256
50932d194ca653e7, retrieved 2026-09-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-4-6(vision), consensusclaude-opus-4-7(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).