component
DIO2501CS14
Public Made by Adomby adom
DIOO Video Amplifiers, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 3d ago |
| viewers | 3d ago |
| dio2501cs14-etched.glb | 3d ago |
| dio2501cs14-etched.step | 3d ago |
| dio2501cs14-hero.glb | 3d ago |
| dio2501cs14-hero.overlay.json | 3d ago |
| dio2501cs14.glb | 3d ago |
| dio2501cs14.kicad_mod | 3d ago |
| dio2501cs14.kicad_sym | 3d ago |
| dio2501cs14.lbr | 3d ago |
| dio2501cs14.step | 3d ago |
| package.json | 3d ago |
| page.json | 3d ago |
| README.md | 3d ago |
| verification.json | 3d ago |
DIO2501CS14
DIOO · Video Amplifiers · SOIC-14
DIO2501CS14 from DIOO, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Video filter driver power supply; the Recommended Operating Conditions give the supply range for this pin. |
| 2 | VIN | power_in | Video filter driver input that feeds the 6th-order SD video filter. |
| 3 | -INR | input | Right channel negative input of the audio line driver, which sets the gain through the RIN/RFB network. |
| 4 | OUTR | output | Right channel output of the audio line driver, which is AC-coupled to the load. |
| 5 | EN | input | Enable input, active-low; it should be kept low until the supplies are up for pop-free power-up. |
| 6 | VSS | power_out | Negative voltage output generated by the charge pump, which must be decoupled with a low-ESR capacitor. |
| 7 | CN | passive | Charge pump flying capacitor negative terminal, connected to the flying capacitor. |
| 8 | CP | passive | Charge pump flying capacitor positive terminal, connected to the flying capacitor. |
| 9 | VDD | power_in | Audio line driver positive supply; the Recommended Operating Conditions give the supply range for this pin. |
| 10 | GND | power_in | Ground reference pin. |
| 11 | OUTL | output | Left channel output of the audio line driver, which is AC-coupled to the load. |
| 12 | -INL | input | Left channel negative input of the audio line driver, which sets the gain through the RIN/RFB network. |
| 13 | VOUT | output | Video filter driver output of the SD video filter. |
| 14 | GND | power_in | Ground reference pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | DIOO |
| Package | SOIC-14 |
| Category | Amplifiers |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VDD) | VDD | 3 | 3.3 | 3.6 | V | 4 | |
| Supply Voltage (VCC) | VCC | 3.135 | 5.5 | V | 4 | ||
| Operating Temperature Range | TA | -40 | 85 | °C | 4 | ||
| Supply Voltage (VCC) | VCC | 0 | 6 | V | 3 | ||
| Supply Voltage (VDD) | VDD | -0.3 | 4 | V | 3 | ||
| Minimum load impedance | 600 | Ω | 3 | ||||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| Lead Temperature Range | 260 | °C | 3 | ||||
| Power Supply Rejection Ratio | PSRR | 90 | dB | 4 | |||
| High level output voltage | VOH | 3.1 | V | 3.3V, RL=10kΩ | 4 | ||
| Output Voltage | VO | 2 | VRMS | THD=1%, VDD=3.3V | 4 | ||
| Supply current | IDD | 0.8 | 2.3 | mA | No load | 4 | |
| Total harmonic distortion + noise | THD+N | 0.0005 | % | VO=2VRMS, f=1kHz | 4 | ||
| Channel crosstalk | XTALK | -105 | dB | 4 | |||
| Signal noise ratio | SNR | 105 | dB | 4 | |||
| Maximum capacitive load | CL | 220 | pF | 4 | |||
| Noise output voltage | VN | 10 | µVRMS | 20Hz to 22kHz A-weighted | 4 | ||
| Unity gain bandwidth | GBW | 6.5 | MHz | 4 | |||
| Open loop voltage gain | AVO | 165 | dB | 4 | |||
| Charge pump frequency | fCP | 300 | kHz | 4 | |||
| Supply current | ICC | 8 | 12 | mA | TA=25°C, VCC=5V, RSOURCE=37.5Ω, RL=150Ω, unless otherwise specified | 5 | |
| Video Input Voltage Range | VIN | 1.4 | VPP | TA=25°C, VCC=5V, RSOURCE=37.5Ω, RL=150Ω, unless otherwise specified | 5 | ||
| Power Supply Rejection | PSRR | -50 | dB | TA=25°C, VCC=5V, RSOURCE=37.5Ω, RL=150Ω, unless otherwise specified | 5 | ||
| Channel Gain | AV | 5.8 | 6 | 6.2 | dB | TA=25°C, VCC=5V, RSOURCE=37.5Ω, RL=150Ω, unless otherwise specified | 5 |
| -1dB Bandwidth | f1dB | 8 | 10.5 | MHz | TA=25°C, VCC=5V, RSOURCE=37.5Ω, RL=150Ω, unless otherwise specified | 5 | |
| -3dB Bandwidth | f3dB | 9 | 11.8 | MHz | TA=25°C, VCC=5V, RSOURCE=37.5Ω, RL=150Ω, unless otherwise specified | 5 | |
| Filter Response | -40 | dB | f=27MHz | 5 | |||
| Differential Gain | DG | 0.2 | % | 5 | |||
| Differential Phase | DP | 0.36 | ° | 5 | |||
| Output Distortion | THD | 0.38 | % | 5 | |||
| Crosstalk | XTALK | -74 | dB | 5 | |||
| Signal to Noise Ratio | SNR | 70 | dB | 5 | |||
| Group Delay | 20 | ns | 5 | ||||
| Chroma Luma Gain | 95 | 100 | 105 | % | 5 | ||
| Chroma Luma Delay | 5.5 | ns | 5 |
CAD (KiCad official)
- Symbol:
DIO2501CS14 - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
dio2501cs14-etched.step/dio2501cs14-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dio2501cs14.step/dio2501cs14.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: DIOO datasheet (9 pp, sha256
6929fc2f2abee36a, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).