component
DG9424EDQ-T1-GE3
Public Made by Adomby adom
Vishay Intertech Analog Switches, Multiplexers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
bcc9f9c
DG9424EDQ-T1-GE3
Vishay Intertech · Analog Switches, Multiplexers · TSSOP-16
DG9424EDQ-T1-GE3 from Vishay Intertech, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN1 | input | Logic control input for switch 1; for the DG9424E a logic 1 turns the switch ON and a logic 0 turns it OFF, and the part is 3 V logic compatible. |
| 2 | COM1 | passive | Common analog terminal of switch 1; signals on COM exceeding V+ or V- are clamped by internal diodes, so forward diode current must be limited to the maximum current rating. |
| 3 | NC1/NO1 | passive | Normally closed / normally open analog terminal of switch 1; signals exceeding V+ or V- are clamped by internal diodes, and the maximum continuous current on NO, NC and COM pins is 100 mA. |
| 4 | V- | power_in | Negative supply pin; the datasheet gives V+ to V- absolute maximum of 18 V and recommends dual supply operation at ±3 V to ±8 V (single supply uses V- = 0 V). |
| 5 | GND | power_in | Ground reference pin; the absolute maximum rating for GND to V- is 18 V. |
| 6 | NC4/NO4 | passive | Normally closed / normally open analog terminal of switch 4; signals exceeding V+ or V- are clamped by internal diodes, and the maximum continuous current on NO, NC and COM pins is 100 mA. |
| 7 | COM4 | passive | Common analog terminal of switch 4; signals on COM exceeding V+ or V- are clamped by internal diodes, so forward diode current must be limited to the maximum current rating. |
| 8 | IN4 | input | Logic control input for switch 4; for the DG9424E a logic 1 turns the switch ON and a logic 0 turns it OFF, and the part is 3 V logic compatible. |
| 9 | IN3 | input | Logic control input for switch 3; for the DG9424E a logic 1 turns the switch ON and a logic 0 turns it OFF, and the part is 3 V logic compatible. |
| 10 | COM3 | passive | Common analog terminal of switch 3; signals on COM exceeding V+ or V- are clamped by internal diodes, so forward diode current must be limited to the maximum current rating. |
| 11 | NC3/NO3 | passive | Normally closed / normally open analog terminal of switch 3; signals exceeding V+ or V- are clamped by internal diodes, and the maximum continuous current on NO, NC and COM pins is 100 mA. |
| 12 | VL | power_in | Logic supply input for the digital control circuitry; the absolute range is (GND - 0.3 V) to (V+ + 0.3 V). |
| 13 | V+ | power_in | Positive supply pin; single supply operation is 3 V to 16 V and dual supply is ±3 V to ±8 V, with V+ to V- absolute maximum of 18 V. |
| 14 | NC2/NO2 | passive | Normally closed / normally open analog terminal of switch 2; signals exceeding V+ or V- are clamped by internal diodes, and the maximum continuous current on NO, NC and COM pins is 100 mA. |
| 15 | COM2 | passive | Common analog terminal of switch 2; signals on COM exceeding V+ or V- are clamped by internal diodes, so forward diode current must be limited to the maximum current rating. |
| 16 | IN2 | input | Logic control input for switch 2; for the DG9424E a logic 1 turns the switch ON and a logic 0 turns it OFF, and the part is 3 V logic compatible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage V+ to V- | -0.3 | 18 | V | 2 | |||
| Continuous current (NO, NC, COM pins) | 100 | mA | 2 | ||||
| Peak current, S or D | 200 | pulsed 1 ms, 10 % duty cycle | 2 | ||||
| Storage temperature | -65 | 150 | °C | 2 | |||
| Power dissipation (package), 16-pin TSSOP | 450 | mW | note c: derate 7 mW/°C above 25 °C | 2 | |||
| Thermal resistance | 178 | °C/W | note b: all leads welded or soldered to PC board | 2 | |||
| ESD human body model (HBM) | 1500 | V | per ANSI/ESDA/JEDEC JS-001; printed as >1500 V | 2 | |||
| Operating temperature range | -40 | 85 | °C | DG9424EDQ-T1-GE3, 16-pin TSSOP | 2 | ||
| Single supply voltage (V+ to V-) | 3 | 16 | V | single supply operation | 1 | ||
| Dual supply voltage (±V) | 3 | 8 | V | dual supply, recommended ±3 V to ±8 V | 1 | ||
| Analog signal range | VANALOG | 0 | 12 | V | Single supply 12 V, V+ = 12 V, V- = 0 V; Full | 3 | |
| On-resistance | RON | 3 | Room; V+ = 10.8 V, V- = 0 V, INO/INC = 50 mA, VCOM = 2/9 V | 3 | |||
| On-resistance | RON | 4 | Full; V+ = 10.8 V, V- = 0 V, INO/INC = 50 mA, VCOM = 2/9 V | 3 | |||
| Turn-on time | tON | 51 | ns | Room; RL = 300, CL = 35 pF, VNO, VNC = 5 V | 3 | ||
| Turn-on time | tON | 65 | ns | Full; RL = 300, CL = 35 pF, VNO, VNC = 5 V | 3 | ||
| Turn-off time | tOFF | 35 | ns | Room; RL = 300, CL = 35 pF, VNO, VNC = 5 V | 3 | ||
| Turn-off time | tOFF | 44 | ns | Full; RL = 300, CL = 35 pF, VNO, VNC = 5 V | 3 | ||
| Positive supply current | I+ | 1 | μA | Room; VIN = 0 or VL | 3 | ||
| Positive supply current | I+ | 5 | μA | Full; VIN = 0 or VL | 3 | ||
| Negative supply current | I- | -1 | μA | Room; VIN = 0 or VL | 3 | ||
| Negative supply current | I- | -5 | μA | Full; VIN = 0 or VL | 3 | ||
| Logic supply current | IL | 1 | μA | Room; VIN = 0 or VL | 3 | ||
| Logic supply current | IL | 5 | μA | Full; VIN = 0 or VL | 3 | ||
| Ground current | IGND | -1 | μA | Room; VIN = 0 or VL | 3 | ||
| Ground current | IGND | -5 | μA | Full; VIN = 0 or VL | 3 | ||
| Analog signal range | VANALOG | -5 | 5 | V | Dual supply ±5 V; Full | 4 | |
| On-resistance | RON | 3.3 | Room; V+ = 4.5 V, V- = -4.5 V, INO/INC = 50 mA | 4 | |||
| On-resistance | RON | 4.3 | Full; V+ = 4.5 V, V- = -4.5 V, INO/INC = 50 mA | 4 | |||
| Input current | IINL or IINH | -1 | 1 | μA | Full; VL = 5 V, VIN = 2.4 V, 0.8 V | 4 | |
| Turn-on time | tON | 67 | ns | Room; RL = 300, CL = 35 pF, VNO, VNC = ±3.5 V | 4 | ||
| Turn-on time | tON | 81 | ns | Full; RL = 300, CL = 35 pF, VNO, VNC = ±3.5 V | 4 | ||
| Turn-off time | tOFF | 57 | ns | Room; RL = 300, CL = 35 pF, VNO, VNC = ±3.5 V | 4 | ||
| Turn-off time | tOFF | 67 | ns | Full; RL = 300, CL = 35 pF, VNO, VNC = ±3.5 V | 4 | ||
| Positive supply current | I+ | 1 | μA | Room; VIN = 0 or VL | 4 | ||
| Positive supply current | I+ | 5 | μA | Full; VIN = 0 or VL | 4 | ||
| Negative supply current | I- | -1 | μA | Room; VIN = 0 or VL | 4 | ||
| Negative supply current | I- | -5 | μA | Full; VIN = 0 or VL | 4 | ||
| Logic supply current | IL | 1 | μA | Room; VIN = 0 or VL | 4 | ||
| Logic supply current | IL | 5 | μA | Full; VIN = 0 or VL | 4 | ||
| Ground current | IGND | -1 | μA | Room; VIN = 0 or VL | 4 | ||
| Ground current | IGND | -5 | μA | Full; VIN = 0 or VL | 4 | ||
| Analog signal range | VANALOG | 5 | V | Single supply 5 V, V+ = 5 V, V- = 0 V; Full | 5 | ||
| On-resistance | RON | 4.8 | Room; V+ = 4.5 V, INO/INC = 50 mA | 5 | |||
| On-resistance | RON | 5.8 | Full; V+ = 4.5 V, INO/INC = 50 mA | 5 | |||
| Turn-on time | tON | 78 | ns | Room; RL = 300, CL = 35 pF, VNO, VNC = 3.5 V | 5 | ||
| Turn-on time | tON | 106 | ns | Hot; RL = 300, CL = 35 pF, VNO, VNC = 3.5 V | 5 | ||
| Turn-off time | tOFF | 44 | ns | Room; RL = 300, CL = 35 pF, VNO, VNC = 3.5 V | 5 | ||
| Turn-off time | tOFF | 56 | ns | Hot; RL = 300, CL = 35 pF, VNO, VNC = 3.5 V | 5 | ||
| Positive supply current | I+ | 1 | μA | Room; VIN = 0 or VL | 5 | ||
| Positive supply current | I+ | 5 | μA | Hot; VIN = 0 or VL | 5 | ||
| Negative supply current | I- | -1 | μA | Room; VIN = 0 or VL | 5 | ||
| Negative supply current | I- | -5 | μA | Hot; VIN = 0 or VL | 5 | ||
| Logic supply current | IL | 1 | μA | Room; VIN = 0 or VL | 5 | ||
| Logic supply current | IL | 5 | μA | Hot; VIN = 0 or VL | 5 | ||
| Ground current | IGND | -1 | μA | Room; VIN = 0 or VL | 5 | ||
| Ground current | IGND | -5 | μA | Hot; VIN = 0 or VL | 5 | ||
| Analog signal range | VANALOG | 0 | 3 | V | Single supply 3 V, V+ = 3 V, V- = 0 V; Full | 6 | |
| Turn-on time | tON | 193 | ns | Full; RL = 300, CL = 35 pF, VNO, VNC = 1.5 V | 6 | ||
| Turn-off time | tOFF | 89 | ns | Full; RL = 300, CL = 35 pF, VNO, VNC = 1.5 V | 6 |
CAD (KiCad official)
- Symbol:
DG9424EDQ-T1-GE3 - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
dg9424edq-t1-ge3-etched.step/dg9424edq-t1-ge3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dg9424edq-t1-ge3.step/dg9424edq-t1-ge3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (14 pp, sha256
49f54db6a1b4281c, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# DG9424EDQ-T1-GE3
**Vishay Intertech** · Analog Switches, Multiplexers · TSSOP-16
DG9424EDQ-T1-GE3 from Vishay Intertech, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN1 | input | Logic control input for switch 1; for the DG9424E a logic 1 turns the switch ON and a logic 0 turns it OFF, and the part is 3 V logic compatible. |
| 2 | COM1 | passive | Common analog terminal of switch 1; signals on COM exceeding V+ or V- are clamped by internal diodes, so forward diode current must be limited to the maximum current rating. |
| 3 | NC1/NO1 | passive | Normally closed / normally open analog terminal of switch 1; signals exceeding V+ or V- are clamped by internal diodes, and the maximum continuous current on NO, NC and COM pins is 100 mA. |
| 4 | V- | power_in | Negative supply pin; the datasheet gives V+ to V- absolute maximum of 18 V and recommends dual supply operation at ±3 V to ±8 V (single supply uses V- = 0 V). |
| 5 | GND | power_in | Ground reference pin; the absolute maximum rating for GND to V- is 18 V. |
| 6 | NC4/NO4 | passive | Normally closed / normally open analog terminal of switch 4; signals exceeding V+ or V- are clamped by internal diodes, and the maximum continuous current on NO, NC and COM pins is 100 mA. |
| 7 | COM4 | passive | Common analog terminal of switch 4; signals on COM exceeding V+ or V- are clamped by internal diodes, so forward diode current must be limited to the maximum current rating. |
| 8 | IN4 | input | Logic control input for switch 4; for the DG9424E a logic 1 turns the switch ON and a logic 0 turns it OFF, and the part is 3 V logic compatible. |
| 9 | IN3 | input | Logic control input for switch 3; for the DG9424E a logic 1 turns the switch ON and a logic 0 turns it OFF, and the part is 3 V logic compatible. |
| 10 | COM3 | passive | Common analog terminal of switch 3; signals on COM exceeding V+ or V- are clamped by internal diodes, so forward diode current must be limited to the maximum current rating. |
| 11 | NC3/NO3 | passive | Normally closed / normally open analog terminal of switch 3; signals exceeding V+ or V- are clamped by internal diodes, and the maximum continuous current on NO, NC and COM pins is 100 mA. |
| 12 | VL | power_in | Logic supply input for the digital control circuitry; the absolute range is (GND - 0.3 V) to (V+ + 0.3 V). |
| 13 | V+ | power_in | Positive supply pin; single supply operation is 3 V to 16 V and dual supply is ±3 V to ±8 V, with V+ to V- absolute maximum of 18 V. |
| 14 | NC2/NO2 | passive | Normally closed / normally open analog terminal of switch 2; signals exceeding V+ or V- are clamped by internal diodes, and the maximum continuous current on NO, NC and COM pins is 100 mA. |
| 15 | COM2 | passive | Common analog terminal of switch 2; signals on COM exceeding V+ or V- are clamped by internal diodes, so forward diode current must be limited to the maximum current rating. |
| 16 | IN2 | input | Logic control input for switch 2; for the DG9424E a logic 1 turns the switch ON and a logic 0 turns it OFF, and the part is 3 V logic compatible. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage V+ to V- | | -0.3 | | 18 | V | | 2 |
| Continuous current (NO, NC, COM pins) | | | | 100 | mA | | 2 |
| Peak current, S or D | | | | 200 | | pulsed 1 ms, 10 % duty cycle | 2 |
| Storage temperature | | -65 | | 150 | °C | | 2 |
| Power dissipation (package), 16-pin TSSOP | | | | 450 | mW | note c: derate 7 mW/°C above 25 °C | 2 |
| Thermal resistance | | | | 178 | °C/W | note b: all leads welded or soldered to PC board | 2 |
| ESD human body model (HBM) | | 1500 | | | V | per ANSI/ESDA/JEDEC JS-001; printed as >1500 V | 2 |
| Operating temperature range | | -40 | | 85 | °C | DG9424EDQ-T1-GE3, 16-pin TSSOP | 2 |
| Single supply voltage (V+ to V-) | | 3 | | 16 | V | single supply operation | 1 |
| Dual supply voltage (±V) | | 3 | | 8 | V | dual supply, recommended ±3 V to ±8 V | 1 |
| Analog signal range | VANALOG | 0 | | 12 | V | Single supply 12 V, V+ = 12 V, V- = 0 V; Full | 3 |
| On-resistance | RON | | | 3 | | Room; V+ = 10.8 V, V- = 0 V, INO/INC = 50 mA, VCOM = 2/9 V | 3 |
| On-resistance | RON | | | 4 | | Full; V+ = 10.8 V, V- = 0 V, INO/INC = 50 mA, VCOM = 2/9 V | 3 |
| Turn-on time | tON | | | 51 | ns | Room; RL = 300, CL = 35 pF, VNO, VNC = 5 V | 3 |
| Turn-on time | tON | | | 65 | ns | Full; RL = 300, CL = 35 pF, VNO, VNC = 5 V | 3 |
| Turn-off time | tOFF | | | 35 | ns | Room; RL = 300, CL = 35 pF, VNO, VNC = 5 V | 3 |
| Turn-off time | tOFF | | | 44 | ns | Full; RL = 300, CL = 35 pF, VNO, VNC = 5 V | 3 |
| Positive supply current | I+ | | | 1 | μA | Room; VIN = 0 or VL | 3 |
| Positive supply current | I+ | | | 5 | μA | Full; VIN = 0 or VL | 3 |
| Negative supply current | I- | -1 | | | μA | Room; VIN = 0 or VL | 3 |
| Negative supply current | I- | -5 | | | μA | Full; VIN = 0 or VL | 3 |
| Logic supply current | IL | | | 1 | μA | Room; VIN = 0 or VL | 3 |
| Logic supply current | IL | | | 5 | μA | Full; VIN = 0 or VL | 3 |
| Ground current | IGND | -1 | | | μA | Room; VIN = 0 or VL | 3 |
| Ground current | IGND | -5 | | | μA | Full; VIN = 0 or VL | 3 |
| Analog signal range | VANALOG | -5 | | 5 | V | Dual supply ±5 V; Full | 4 |
| On-resistance | RON | | | 3.3 | | Room; V+ = 4.5 V, V- = -4.5 V, INO/INC = 50 mA | 4 |
| On-resistance | RON | | | 4.3 | | Full; V+ = 4.5 V, V- = -4.5 V, INO/INC = 50 mA | 4 |
| Input current | IINL or IINH | -1 | | 1 | μA | Full; VL = 5 V, VIN = 2.4 V, 0.8 V | 4 |
| Turn-on time | tON | | | 67 | ns | Room; RL = 300, CL = 35 pF, VNO, VNC = ±3.5 V | 4 |
| Turn-on time | tON | | | 81 | ns | Full; RL = 300, CL = 35 pF, VNO, VNC = ±3.5 V | 4 |
| Turn-off time | tOFF | | | 57 | ns | Room; RL = 300, CL = 35 pF, VNO, VNC = ±3.5 V | 4 |
| Turn-off time | tOFF | | | 67 | ns | Full; RL = 300, CL = 35 pF, VNO, VNC = ±3.5 V | 4 |
| Positive supply current | I+ | | | 1 | μA | Room; VIN = 0 or VL | 4 |
| Positive supply current | I+ | | | 5 | μA | Full; VIN = 0 or VL | 4 |
| Negative supply current | I- | -1 | | | μA | Room; VIN = 0 or VL | 4 |
| Negative supply current | I- | -5 | | | μA | Full; VIN = 0 or VL | 4 |
| Logic supply current | IL | | | 1 | μA | Room; VIN = 0 or VL | 4 |
| Logic supply current | IL | | | 5 | μA | Full; VIN = 0 or VL | 4 |
| Ground current | IGND | -1 | | | μA | Room; VIN = 0 or VL | 4 |
| Ground current | IGND | -5 | | | μA | Full; VIN = 0 or VL | 4 |
| Analog signal range | VANALOG | | | 5 | V | Single supply 5 V, V+ = 5 V, V- = 0 V; Full | 5 |
| On-resistance | RON | | | 4.8 | | Room; V+ = 4.5 V, INO/INC = 50 mA | 5 |
| On-resistance | RON | | | 5.8 | | Full; V+ = 4.5 V, INO/INC = 50 mA | 5 |
| Turn-on time | tON | | | 78 | ns | Room; RL = 300, CL = 35 pF, VNO, VNC = 3.5 V | 5 |
| Turn-on time | tON | | | 106 | ns | Hot; RL = 300, CL = 35 pF, VNO, VNC = 3.5 V | 5 |
| Turn-off time | tOFF | | | 44 | ns | Room; RL = 300, CL = 35 pF, VNO, VNC = 3.5 V | 5 |
| Turn-off time | tOFF | | | 56 | ns | Hot; RL = 300, CL = 35 pF, VNO, VNC = 3.5 V | 5 |
| Positive supply current | I+ | | | 1 | μA | Room; VIN = 0 or VL | 5 |
| Positive supply current | I+ | | | 5 | μA | Hot; VIN = 0 or VL | 5 |
| Negative supply current | I- | -1 | | | μA | Room; VIN = 0 or VL | 5 |
| Negative supply current | I- | -5 | | | μA | Hot; VIN = 0 or VL | 5 |
| Logic supply current | IL | | | 1 | μA | Room; VIN = 0 or VL | 5 |
| Logic supply current | IL | | | 5 | μA | Hot; VIN = 0 or VL | 5 |
| Ground current | IGND | -1 | | | μA | Room; VIN = 0 or VL | 5 |
| Ground current | IGND | -5 | | | μA | Hot; VIN = 0 or VL | 5 |
| Analog signal range | VANALOG | 0 | | 3 | V | Single supply 3 V, V+ = 3 V, V- = 0 V; Full | 6 |
| Turn-on time | tON | | | 193 | ns | Full; RL = 300, CL = 35 pF, VNO, VNC = 1.5 V | 6 |
| Turn-off time | tOFF | | | 89 | ns | Full; RL = 300, CL = 35 pF, VNO, VNC = 1.5 V | 6 |
## CAD (KiCad official)
- Symbol: `DG9424EDQ-T1-GE3`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `dg9424edq-t1-ge3-etched.step` / `dg9424edq-t1-ge3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `dg9424edq-t1-ge3.step` / `dg9424edq-t1-ge3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Vishay Intertech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908586550366208) (14 pp, sha256 `49f54db6a1b4281c`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/dg9424edq-t1-ge3-datasheet.pdf)