component
DG441DYZ-T
Public Made by Adomby adom
RENESAS Analog Switches, Multiplexers, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
635f3df
DG441DYZ-T
RENESAS · Analog Switches, Multiplexers · SOIC-16
DG441DYZ-T from RENESAS, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN1 | input | Logic control for switch 1; the DG441 switch is ON for logic 0 (VIN ≤ 0.8V) and OFF for logic 1 (VIN ≥ 2.4V). |
| 2 | D1 | passive | Drain (output) terminal for switch 1; continuous current is limited to 30mA and pulsed peak current to 100mA (1ms pulse, 10% duty cycle max). |
| 3 | S1 | passive | Source (input) terminal for switch 1; analog signal range is -15V to +15V with dual supplies and 0V to 12V with a single 12V supply. |
| 4 | V- | power_in | Negative power supply terminal; GND to V- is limited to -25V maximum, and symmetrical supplies from ±5V to ±22V are supported. |
| 5 | GND | power_in | Ground terminal (logic common); GND to V- is limited to -25V and GND to V+ to +34V maximum. |
| 6 | S4 | passive | Source (input) terminal for switch 4; analog signal range is -15V to +15V with dual supplies. |
| 7 | D4 | passive | Drain (output) terminal for switch 4; continuous current is limited to 30mA and pulsed peak current to 100mA (1ms pulse, 10% duty cycle max). |
| 8 | IN4 | input | Logic control for switch 4; the DG441 switch is ON for logic 0 (VIN ≤ 0.8V) and OFF for logic 1 (VIN ≥ 2.4V). |
| 9 | IN3 | input | Logic control for switch 3; the DG441 switch is ON for logic 0 (VIN ≤ 0.8V) and OFF for logic 1 (VIN ≥ 2.4V). |
| 10 | D3 | passive | Drain (output) terminal for switch 3; continuous current is limited to 30mA and pulsed peak current to 100mA (1ms pulse, 10% duty cycle max). |
| 11 | S3 | passive | Source (input) terminal for switch 3; analog signal range is -15V to +15V with dual supplies and 0V to 12V with a single 12V supply. |
| 12 | NC | unconnected | No internal connection. |
| 13 | V+ | power_in | Positive power supply terminal (substrate); single supply is +5V to +34V, V+ to V- must not exceed 44V, and V+ must not exceed 34V in asymmetrical operation. |
| 14 | S2 | passive | Source (input) terminal for switch 2; analog signal range is -15V to +15V with dual supplies and 0V to 12V with a single 12V supply. |
| 15 | D2 | passive | Drain (output) terminal for switch 2; continuous current is limited to 30mA and pulsed peak current to 100mA (1ms pulse, 10% duty cycle max). |
| 16 | IN2 | input | Logic control for switch 2; the DG441 switch is ON for logic 0 (VIN ≤ 0.8V) and OFF for logic 1 (VIN ≥ 2.4V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| V+ to V- (supply differential) | 44 | V | 4 | ||||
| GND to V- | -25 | V | 4 | ||||
| GND to V+ | 34 | V | 4 | ||||
| Digital Inputs, VS, VD | -2 | 2 | V | Referenced to V- (min) and V+ (max); or 30mA, whichever occurs first | 4 | ||
| Continuous Current (Any Terminal) | 30 | mA | 4 | ||||
| Peak Current, S or D | 100 | mA | Pulsed 1ms, 10% duty cycle max | 4 | |||
| Temperature Range | -40 | 85 | °C | 4 | |||
| Signal Voltage Range | 20 | V | 4 | ||||
| Input Low Voltage | 0.8 | V | 4 | ||||
| Input High Voltage | 2.4 | V | 4 | ||||
| Input Rise and Fall Time | 20 | ns | 4 | ||||
| Maximum Junction Temperature (Plastic Packages) | 150 | °C | 4 | ||||
| Maximum Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Maximum Lead Temperature (Soldering) | 300 | °C | 10s; SOIC and TSSOP lead tips only | 4 | |||
| Turn-ON Time (dual supply) | tON | 150 | 250 | ns | RL = 1k, CL = 35pF, VS = 10V (Figure 1); +25°C | 4 | |
| Turn-OFF Time, DG441 (dual supply) | tOFF | 90 | 120 | ns | DG441; +25°C | 4 | |
| Input Current VIN Low (dual supply) | IIL | -0.5 | -1e-05 | 0.5 | A | VIN under test = 0.8V, all others = 2.4V; Full | 4 |
| Input Current VIN High (dual supply) | IIH | -0.5 | 1e-05 | 0.5 | A | VIN under test = 2.4V, all others = 0.8V; Full | 4 |
| Analog Signal Range (dual supply) | VANALOG | -15 | 15 | V | Full | 4 | |
| Drain-Source ON Resistance (dual supply) | rDS(ON) | 50 | 85 | Ω | IS = 10mA, VD = 8.5V, V+ = 13.5V, V- = -13.5V; +25°C | 4 | |
| Drain-Source ON Resistance (dual supply) | rDS(ON) | 100 | Ω | +85°C | 4 | ||
| Source OFF Leakage Current (dual supply) | IS(OFF) | -0.5 | 0.01 | 0.5 | nA | V+ = 16.5V, V- = -16.5V, VD = 15.5V, VS = 15.5V; +25°C | 4 |
| Source OFF Leakage Current (dual supply) | IS(OFF) | -5 | 5 | nA | +85°C | 4 | |
| Drain OFF Leakage Current (dual supply) | ID(OFF) | -0.5 | 0.01 | 0.5 | nA | +25°C | 4 |
| Drain OFF Leakage Current (dual supply) | ID(OFF) | -5 | 5 | nA | +85°C | 4 | |
| Channel ON Leakage Current (dual supply) | ID(ON) + IS(ON) | -0.5 | 0.08 | 0.5 | nA | V+ = 16.5V, V- = -16.5V, VS = VD = 15.5V; +25°C | 4 |
| Channel ON Leakage Current (dual supply) | ID(ON) + IS(ON) | -10 | 10 | nA | +85°C | 4 | |
| Positive Supply Current (dual supply) | I+ | 15 | 100 | A | V+ = 16.5V, V- = -16.5V, VIN = 0V or 5V; Full | 5 | |
| Negative Supply Current (dual supply) | I- | -1 | -0.0001 | A | +25°C | 5 | |
| Negative Supply Current (dual supply) | I- | -5 | A | Full | 5 | ||
| Ground Current (dual supply) | IGND | -100 | -15 | A | Full | 5 | |
| Turn-ON Time (single supply) | tON | 300 | 450 | ns | RL = 1k, CL = 35pF, VS = 8V (Figure 1); +25°C | 5 | |
| Turn-OFF Time (single supply) | tOFF | 60 | 200 | ns | +25°C | 5 | |
| Analog Signal Range (single supply) | VANALOG | 0 | 12 | V | Full | 5 | |
| Drain-Source ON Resistance (single supply) | rDS(ON) | 100 | 160 | Ω | IS = 10mA, VD = 3V, 8V, V+ = 10.8V; +25°C | 5 | |
| Drain-Source ON Resistance (single supply) | rDS(ON) | 200 | Ω | Full | 5 | ||
| Positive Supply Current (single supply) | I+ | 15 | 100 | A | V+ = 13.2V, V- = 0V, VIN = 0V or 5V; Full | 5 | |
| Negative Supply Current (single supply) | I- | -1 | -0.0001 | A | +25°C | 5 | |
| Negative Supply Current (single supply) | I- | -100 | -0.0001 | A | Full | 5 | |
| Ground Current (single supply) | IGND | -100 | -15 | A | Full | 5 | |
| Thermal Resistance, junction-to-ambient (SOIC) | JA | 115 | °C/W | Typical, Note 2 (high effective thermal conductivity test board, free air); SOIC package | 4 |
CAD (KiCad official)
- Symbol:
DG441DYZ-T - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
dg441dyz-t-etched.step/dg441dyz-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dg441dyz-t.step/dg441dyz-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (14 pp, sha256
4716ec8e9fcaba03, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# DG441DYZ-T
**RENESAS** · Analog Switches, Multiplexers · SOIC-16
DG441DYZ-T from RENESAS, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN1 | input | Logic control for switch 1; the DG441 switch is ON for logic 0 (VIN ≤ 0.8V) and OFF for logic 1 (VIN ≥ 2.4V). |
| 2 | D1 | passive | Drain (output) terminal for switch 1; continuous current is limited to 30mA and pulsed peak current to 100mA (1ms pulse, 10% duty cycle max). |
| 3 | S1 | passive | Source (input) terminal for switch 1; analog signal range is -15V to +15V with dual supplies and 0V to 12V with a single 12V supply. |
| 4 | V- | power_in | Negative power supply terminal; GND to V- is limited to -25V maximum, and symmetrical supplies from ±5V to ±22V are supported. |
| 5 | GND | power_in | Ground terminal (logic common); GND to V- is limited to -25V and GND to V+ to +34V maximum. |
| 6 | S4 | passive | Source (input) terminal for switch 4; analog signal range is -15V to +15V with dual supplies. |
| 7 | D4 | passive | Drain (output) terminal for switch 4; continuous current is limited to 30mA and pulsed peak current to 100mA (1ms pulse, 10% duty cycle max). |
| 8 | IN4 | input | Logic control for switch 4; the DG441 switch is ON for logic 0 (VIN ≤ 0.8V) and OFF for logic 1 (VIN ≥ 2.4V). |
| 9 | IN3 | input | Logic control for switch 3; the DG441 switch is ON for logic 0 (VIN ≤ 0.8V) and OFF for logic 1 (VIN ≥ 2.4V). |
| 10 | D3 | passive | Drain (output) terminal for switch 3; continuous current is limited to 30mA and pulsed peak current to 100mA (1ms pulse, 10% duty cycle max). |
| 11 | S3 | passive | Source (input) terminal for switch 3; analog signal range is -15V to +15V with dual supplies and 0V to 12V with a single 12V supply. |
| 12 | NC | unconnected | No internal connection. |
| 13 | V+ | power_in | Positive power supply terminal (substrate); single supply is +5V to +34V, V+ to V- must not exceed 44V, and V+ must not exceed 34V in asymmetrical operation. |
| 14 | S2 | passive | Source (input) terminal for switch 2; analog signal range is -15V to +15V with dual supplies and 0V to 12V with a single 12V supply. |
| 15 | D2 | passive | Drain (output) terminal for switch 2; continuous current is limited to 30mA and pulsed peak current to 100mA (1ms pulse, 10% duty cycle max). |
| 16 | IN2 | input | Logic control for switch 2; the DG441 switch is ON for logic 0 (VIN ≤ 0.8V) and OFF for logic 1 (VIN ≥ 2.4V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| V+ to V- (supply differential) | | | | 44 | V | | 4 |
| GND to V- | | | | -25 | V | | 4 |
| GND to V+ | | | | 34 | V | | 4 |
| Digital Inputs, VS, VD | | -2 | | 2 | V | Referenced to V- (min) and V+ (max); or 30mA, whichever occurs first | 4 |
| Continuous Current (Any Terminal) | | | | 30 | mA | | 4 |
| Peak Current, S or D | | | | 100 | mA | Pulsed 1ms, 10% duty cycle max | 4 |
| Temperature Range | | -40 | | 85 | °C | | 4 |
| Signal Voltage Range | | | | 20 | V | | 4 |
| Input Low Voltage | | | | 0.8 | V | | 4 |
| Input High Voltage | | 2.4 | | | V | | 4 |
| Input Rise and Fall Time | | | | 20 | ns | | 4 |
| Maximum Junction Temperature (Plastic Packages) | | | | 150 | °C | | 4 |
| Maximum Storage Temperature Range | | -65 | | 150 | °C | | 4 |
| Maximum Lead Temperature (Soldering) | | | | 300 | °C | 10s; SOIC and TSSOP lead tips only | 4 |
| Turn-ON Time (dual supply) | tON | | 150 | 250 | ns | RL = 1k, CL = 35pF, VS = 10V (Figure 1); +25°C | 4 |
| Turn-OFF Time, DG441 (dual supply) | tOFF | | 90 | 120 | ns | DG441; +25°C | 4 |
| Input Current VIN Low (dual supply) | IIL | -0.5 | -1e-05 | 0.5 | A | VIN under test = 0.8V, all others = 2.4V; Full | 4 |
| Input Current VIN High (dual supply) | IIH | -0.5 | 1e-05 | 0.5 | A | VIN under test = 2.4V, all others = 0.8V; Full | 4 |
| Analog Signal Range (dual supply) | VANALOG | -15 | | 15 | V | Full | 4 |
| Drain-Source ON Resistance (dual supply) | rDS(ON) | | 50 | 85 | Ω | IS = 10mA, VD = 8.5V, V+ = 13.5V, V- = -13.5V; +25°C | 4 |
| Drain-Source ON Resistance (dual supply) | rDS(ON) | | | 100 | Ω | +85°C | 4 |
| Source OFF Leakage Current (dual supply) | IS(OFF) | -0.5 | 0.01 | 0.5 | nA | V+ = 16.5V, V- = -16.5V, VD = 15.5V, VS = 15.5V; +25°C | 4 |
| Source OFF Leakage Current (dual supply) | IS(OFF) | -5 | | 5 | nA | +85°C | 4 |
| Drain OFF Leakage Current (dual supply) | ID(OFF) | -0.5 | 0.01 | 0.5 | nA | +25°C | 4 |
| Drain OFF Leakage Current (dual supply) | ID(OFF) | -5 | | 5 | nA | +85°C | 4 |
| Channel ON Leakage Current (dual supply) | ID(ON) + IS(ON) | -0.5 | 0.08 | 0.5 | nA | V+ = 16.5V, V- = -16.5V, VS = VD = 15.5V; +25°C | 4 |
| Channel ON Leakage Current (dual supply) | ID(ON) + IS(ON) | -10 | | 10 | nA | +85°C | 4 |
| Positive Supply Current (dual supply) | I+ | | 15 | 100 | A | V+ = 16.5V, V- = -16.5V, VIN = 0V or 5V; Full | 5 |
| Negative Supply Current (dual supply) | I- | -1 | -0.0001 | | A | +25°C | 5 |
| Negative Supply Current (dual supply) | I- | -5 | | | A | Full | 5 |
| Ground Current (dual supply) | IGND | -100 | -15 | | A | Full | 5 |
| Turn-ON Time (single supply) | tON | | 300 | 450 | ns | RL = 1k, CL = 35pF, VS = 8V (Figure 1); +25°C | 5 |
| Turn-OFF Time (single supply) | tOFF | | 60 | 200 | ns | +25°C | 5 |
| Analog Signal Range (single supply) | VANALOG | 0 | | 12 | V | Full | 5 |
| Drain-Source ON Resistance (single supply) | rDS(ON) | | 100 | 160 | Ω | IS = 10mA, VD = 3V, 8V, V+ = 10.8V; +25°C | 5 |
| Drain-Source ON Resistance (single supply) | rDS(ON) | | | 200 | Ω | Full | 5 |
| Positive Supply Current (single supply) | I+ | | 15 | 100 | A | V+ = 13.2V, V- = 0V, VIN = 0V or 5V; Full | 5 |
| Negative Supply Current (single supply) | I- | -1 | -0.0001 | | A | +25°C | 5 |
| Negative Supply Current (single supply) | I- | -100 | -0.0001 | | A | Full | 5 |
| Ground Current (single supply) | IGND | -100 | -15 | | A | Full | 5 |
| Thermal Resistance, junction-to-ambient (SOIC) | JA | | 115 | | °C/W | Typical, Note 2 (high effective thermal conductivity test board, free air); SOIC package | 4 |
## CAD (KiCad official)
- Symbol: `DG441DYZ-T`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files: `dg441dyz-t-etched.step` / `dg441dyz-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `dg441dyz-t.step` / `dg441dyz-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590338012082040832) (14 pp, sha256 `4716ec8e9fcaba03`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/dg441dyz-t-datasheet.pdf)