component
DG419LEDQ-T1-GE3
Public Made by Adomby adom
Vishay Intertech Analog Switches, Multiplexers, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
DG419LEDQ-T1-GE3
Vishay Intertech · Analog Switches, Multiplexers · MSOP-8
DG419LEDQ-T1-GE3 from Vishay Intertech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COM | passive | Common analog switch terminal that connects to NC when IN is logic 0 and to NO when IN is logic 1, with signals beyond V+ or V- clamped by internal diodes and forward diode current limited to the maximum current rating. |
| 2 | NC | unconnected | Normally closed analog terminal that is on (connected to COM) when IN is logic 0 and off when IN is logic 1, providing break-before-make switching on the DG419LE. |
| 3 | GND | power_in | Ground reference for the device, with GND referenced to V- limited to -0.3 V to 18 V and V+ referenced to GND limited to -0.3 V to 18 V absolute maximum. |
| 4 | V+ | power_in | Positive supply for single-supply operation from +3 V to +16 V, with V+, VL and IN referenced to V- limited to -0.3 V to 18 V absolute maximum. |
| 5 | VL | power_in | Logic supply that sets the control input levels, tested at VL = 5 V and VL = 3 V, with VL referenced to V- limited to -0.3 V to 18 V absolute maximum. |
| 6 | IN | input | CMOS/TTL-compatible logic control input that may be driven above V+, with input current limited to ±1 µA over the full temperature range. |
| 7 | V- | power_in | Negative supply for dual-supply operation from -3 V to -8 V, with V+, VL and IN referenced to V- limited to -0.3 V to 18 V absolute maximum. |
| 8 | NO | passive | Normally open analog terminal that is on (connected to COM) when IN is logic 1 and off when IN is logic 0, with signals beyond V+ or V- clamped by internal diodes. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | MSOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Single supply voltage range | 3 | 16 | V | Single supply | 1 | ||
| Dual supply voltage range | 3 | 8 | V | Dual supply, ±3 V to ±8 V | 1 | ||
| Operating temperature range | -40 | 85 | °C | Operating temperature range | 1 | ||
| Analog signal range | VANALOG | 0 | 12 | V | Full; V+ = 12 V, V- = 0 V | 3 | |
| Analog signal range | VANALOG | -5 | 5 | V | Full; V+ = 5 V, V- = -5 V | 4 | |
| V+, VL, IN reference to V- | -0.3 | 18 | V | V+, VL, IN reference to V- | 2 | ||
| V+ reference to GND | -0.3 | 18 | V | V+ reference to GND | 2 | ||
| GND reference to V- | -0.3 | 18 | V | GND reference to V- | 2 | ||
| COM, NC, NO reference to V- | -0.3 | V | Maximum printed as (V+ + 0.3) or 30 mA, whichever occurs first; note a | 2 | |||
| Continuous current (any terminal) | 30 | mA | Any terminal | 2 | |||
| Peak current, S or D | 100 | Pulsed 1 ms, 10 % duty cycle | 2 | ||||
| Storage temperature (DQ, DY suffix) | -65 | 150 | °C | DQ, DY suffix | 2 | ||
| Power dissipation, 8-pin MSOP | 320 | mW | 8-pin MSOP; note c: derate 6.5 mW/°C above 25 °C | 2 | |||
| ESD HBM (JS-001) | 2000 | V | JS-001 | 2 | |||
| ESD CDM (JS-002) | 2000 | JS-002 | 2 | ||||
| Latch up | 300 | mA | JESD78 | 2 | |||
| Drain-source on-resistance (12 V) | RDS(on) | 11 | 14 | Room; V+ = 10.8 V, V- = 0 V; INO, INC = 5 mA, VCOM = 2 V / 9 V; DG419LE only | 3 | ||
| Drain-source on-resistance (12 V) | RDS(on) | 18 | Full; V+ = 10.8 V, V- = 0 V; INO, INC = 5 mA, VCOM = 2 V / 9 V; DG419LE only | 3 | |||
| Switch off leakage current INO(off) INC(off) (12 V) | INO(off) | -2 | 0.002 | 2 | nA | Room; VCOM = 1 V / 11 V, VNO, VNC = 11 V / 1 V | 3 |
| Switch off leakage current INO(off) INC(off) (12 V) | INO(off) | -10 | 10 | nA | Full; VCOM = 1 V / 11 V, VNO, VNC = 11 V / 1 V | 3 | |
| Switch off leakage current ICOM(off) (12 V) | ICOM(off) | -2 | 0.003 | 2 | nA | Room; VCOM = 1 V / 11 V, VNO, VNC = 11 V / 1 V | 3 |
| Switch off leakage current ICOM(off) (12 V) | ICOM(off) | -10 | 10 | nA | Full; VCOM = 1 V / 11 V, VNO, VNC = 11 V / 1 V | 3 | |
| Switch on leakage current ICOM(on) (12 V) | ICOM(on) | -2 | 0.006 | 2 | nA | Room; VNO, VNC = VCOM = 11 V / 1 V | 3 |
| Switch on leakage current ICOM(on) (12 V) | ICOM(on) | -10 | 10 | nA | Full; VNO, VNC = VCOM = 11 V / 1 V | 3 | |
| Input current IINL or IINH (12 V) | IINL or IINH | -1 | 0.02 | 1 | μA | Full | 3 |
| Turn-on time (12 V) | tON | 20 | 38 | ns | Room; RL = 300, CL = 35 pF; VNO, VNC = 5 V | 3 | |
| Turn-on time (12 V) | tON | 40 | ns | Full; RL = 300, CL = 35 pF; VNO, VNC = 5 V | 3 | ||
| Turn-off time (12 V) | tOFF | 15 | 32 | ns | Room | 3 | |
| Turn-off time (12 V) | tOFF | 35 | ns | Full | 3 | ||
| Positive supply current I+ (12 V) | I+ | 9e-05 | 1 | μA | Room; VIN = 0 V or VL | 3 | |
| Positive supply current I+ (12 V) | I+ | 5 | μA | Full; VIN = 0 V or VL | 3 | ||
| Negative supply current I- (12 V) | I- | -1 | -9e-05 | μA | Room | 3 | |
| Negative supply current I- (12 V) | I- | -5 | μA | Full | 3 | ||
| Logic supply current IL (12 V) | IL | 2e-05 | 1 | μA | Room | 3 | |
| Logic supply current IL (12 V) | IL | 5 | μA | Full | 3 | ||
| Ground current IGND (12 V) | IGND | -1 | -2e-05 | μA | Room | 3 | |
| Ground current IGND (12 V) | IGND | -5 | μA | Full | 3 | ||
| Drain-source on-resistance (±5 V) | RDS(on) | 12 | 15 | Room; V+ = 5 V, V- = -5 V; INO, INC = 5 mA, VCOM = ±3.5 V; DG419LE only | 4 | ||
| Drain-source on-resistance (±5 V) | RDS(on) | 21 | Full; V+ = 5 V, V- = -5 V; INO, INC = 5 mA, VCOM = ±3.5 V; DG419LE only | 4 | |||
| Switch off leakage current INO(off) INC(off) (±5 V) | INO(off) | -2 | 0.001 | 2 | nA | Room; V+ = 5.5 V, V- = -5.5 V; VCOM = ±4.5 V; VNO, VNC = ±4.5 V | 4 |
| Switch off leakage current INO(off) INC(off) (±5 V) | INO(off) | -10 | 10 | nA | Full; V+ = 5.5 V, V- = -5.5 V; VCOM = ±4.5 V; VNO, VNC = ±4.5 V | 4 | |
| Switch off leakage current ICOM(off) (±5 V) | ICOM(off) | -2 | 0.002 | 2 | nA | Room; V+ = 5.5 V, V- = -5.5 V; VCOM = ±4.5 V; VNO, VNC = ±4.5 V | 4 |
| Switch off leakage current ICOM(off) (±5 V) | ICOM(off) | -10 | 10 | nA | Full; V+ = 5.5 V, V- = -5.5 V; VCOM = ±4.5 V; VNO, VNC = ±4.5 V | 4 | |
| Channel on leakage current ICOM(on) (±5 V) | ICOM(on) | -2 | 0.003 | 2 | nA | Room; V+ = 5.5 V, V- = -5.5 V; VNO, VNC = VCOM = ±4.5 V | 4 |
| Channel on leakage current ICOM(on) (±5 V) | ICOM(on) | -10 | 10 | nA | Full; V+ = 5.5 V, V- = -5.5 V; VNO, VNC = VCOM = ±4.5 V | 4 | |
| Input current IINL or IINH (±5 V) | IINL or IINH | -1 | 0.02 | 1 | μA | Full | 4 |
| Turn-on time (±5 V) | tON | 21 | 38 | ns | Room; RL = 300, CL = 35 pF; VNO, VNC = ±3.5 V | 4 | |
| Turn-on time (±5 V) | tON | 40 | ns | Full; RL = 300, CL = 35 pF; VNO, VNC = ±3.5 V | 4 | ||
| Turn-off time (±5 V) | tOFF | 20 | 45 | ns | Room | 4 | |
| Turn-off time (±5 V) | tOFF | 50 | ns | Full | 4 | ||
| Positive supply current I+ (±5 V) | I+ | 7e-05 | 1 | μA | Room; VIN = 0 V or VL | 4 | |
| Positive supply current I+ (±5 V) | I+ | 5 | μA | Full; VIN = 0 V or VL | 4 | ||
| Negative supply current I- (±5 V) | I- | -1 | -9e-05 | μA | Room | 4 | |
| Negative supply current I- (±5 V) | I- | -5 | μA | Full | 4 | ||
| Logic supply current IL (±5 V) | IL | 2e-05 | 1 | μA | Room | 4 | |
| Logic supply current IL (±5 V) | IL | 5 | μA | Full | 4 | ||
| Ground current IGND (±5 V) | IGND | -1 | -3e-05 | μA | Room | 4 | |
| Ground current IGND (±5 V) | IGND | -5 | μA | Full | 4 |
CAD (KiCad official)
- Symbol:
DG419LEDQ-T1-GE3 - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
dg419ledq-t1-ge3-etched.step/dg419ledq-t1-ge3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dg419ledq-t1-ge3.step/dg419ledq-t1-ge3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (15 pp, sha256
713fad1c6becd408, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# DG419LEDQ-T1-GE3
**Vishay Intertech** · Analog Switches, Multiplexers · MSOP-8
DG419LEDQ-T1-GE3 from Vishay Intertech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COM | passive | Common analog switch terminal that connects to NC when IN is logic 0 and to NO when IN is logic 1, with signals beyond V+ or V- clamped by internal diodes and forward diode current limited to the maximum current rating. |
| 2 | NC | unconnected | Normally closed analog terminal that is on (connected to COM) when IN is logic 0 and off when IN is logic 1, providing break-before-make switching on the DG419LE. |
| 3 | GND | power_in | Ground reference for the device, with GND referenced to V- limited to -0.3 V to 18 V and V+ referenced to GND limited to -0.3 V to 18 V absolute maximum. |
| 4 | V+ | power_in | Positive supply for single-supply operation from +3 V to +16 V, with V+, VL and IN referenced to V- limited to -0.3 V to 18 V absolute maximum. |
| 5 | VL | power_in | Logic supply that sets the control input levels, tested at VL = 5 V and VL = 3 V, with VL referenced to V- limited to -0.3 V to 18 V absolute maximum. |
| 6 | IN | input | CMOS/TTL-compatible logic control input that may be driven above V+, with input current limited to ±1 µA over the full temperature range. |
| 7 | V- | power_in | Negative supply for dual-supply operation from -3 V to -8 V, with V+, VL and IN referenced to V- limited to -0.3 V to 18 V absolute maximum. |
| 8 | NO | passive | Normally open analog terminal that is on (connected to COM) when IN is logic 1 and off when IN is logic 0, with signals beyond V+ or V- clamped by internal diodes. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | MSOP-8 |
| Category | Interface |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Single supply voltage range | | 3 | | 16 | V | Single supply | 1 |
| Dual supply voltage range | | 3 | | 8 | V | Dual supply, ±3 V to ±8 V | 1 |
| Operating temperature range | | -40 | | 85 | °C | Operating temperature range | 1 |
| Analog signal range | VANALOG | 0 | | 12 | V | Full; V+ = 12 V, V- = 0 V | 3 |
| Analog signal range | VANALOG | -5 | | 5 | V | Full; V+ = 5 V, V- = -5 V | 4 |
| V+, VL, IN reference to V- | | -0.3 | | 18 | V | V+, VL, IN reference to V- | 2 |
| V+ reference to GND | | -0.3 | | 18 | V | V+ reference to GND | 2 |
| GND reference to V- | | -0.3 | | 18 | V | GND reference to V- | 2 |
| COM, NC, NO reference to V- | | -0.3 | | | V | Maximum printed as (V+ + 0.3) or 30 mA, whichever occurs first; note a | 2 |
| Continuous current (any terminal) | | | | 30 | mA | Any terminal | 2 |
| Peak current, S or D | | | | 100 | | Pulsed 1 ms, 10 % duty cycle | 2 |
| Storage temperature (DQ, DY suffix) | | -65 | | 150 | °C | DQ, DY suffix | 2 |
| Power dissipation, 8-pin MSOP | | | | 320 | mW | 8-pin MSOP; note c: derate 6.5 mW/°C above 25 °C | 2 |
| ESD HBM (JS-001) | | | | 2000 | V | JS-001 | 2 |
| ESD CDM (JS-002) | | | | 2000 | | JS-002 | 2 |
| Latch up | | | | 300 | mA | JESD78 | 2 |
| Drain-source on-resistance (12 V) | RDS(on) | | 11 | 14 | | Room; V+ = 10.8 V, V- = 0 V; INO, INC = 5 mA, VCOM = 2 V / 9 V; DG419LE only | 3 |
| Drain-source on-resistance (12 V) | RDS(on) | | | 18 | | Full; V+ = 10.8 V, V- = 0 V; INO, INC = 5 mA, VCOM = 2 V / 9 V; DG419LE only | 3 |
| Switch off leakage current INO(off) INC(off) (12 V) | INO(off) | -2 | 0.002 | 2 | nA | Room; VCOM = 1 V / 11 V, VNO, VNC = 11 V / 1 V | 3 |
| Switch off leakage current INO(off) INC(off) (12 V) | INO(off) | -10 | | 10 | nA | Full; VCOM = 1 V / 11 V, VNO, VNC = 11 V / 1 V | 3 |
| Switch off leakage current ICOM(off) (12 V) | ICOM(off) | -2 | 0.003 | 2 | nA | Room; VCOM = 1 V / 11 V, VNO, VNC = 11 V / 1 V | 3 |
| Switch off leakage current ICOM(off) (12 V) | ICOM(off) | -10 | | 10 | nA | Full; VCOM = 1 V / 11 V, VNO, VNC = 11 V / 1 V | 3 |
| Switch on leakage current ICOM(on) (12 V) | ICOM(on) | -2 | 0.006 | 2 | nA | Room; VNO, VNC = VCOM = 11 V / 1 V | 3 |
| Switch on leakage current ICOM(on) (12 V) | ICOM(on) | -10 | | 10 | nA | Full; VNO, VNC = VCOM = 11 V / 1 V | 3 |
| Input current IINL or IINH (12 V) | IINL or IINH | -1 | 0.02 | 1 | μA | Full | 3 |
| Turn-on time (12 V) | tON | | 20 | 38 | ns | Room; RL = 300, CL = 35 pF; VNO, VNC = 5 V | 3 |
| Turn-on time (12 V) | tON | | | 40 | ns | Full; RL = 300, CL = 35 pF; VNO, VNC = 5 V | 3 |
| Turn-off time (12 V) | tOFF | | 15 | 32 | ns | Room | 3 |
| Turn-off time (12 V) | tOFF | | | 35 | ns | Full | 3 |
| Positive supply current I+ (12 V) | I+ | | 9e-05 | 1 | μA | Room; VIN = 0 V or VL | 3 |
| Positive supply current I+ (12 V) | I+ | | | 5 | μA | Full; VIN = 0 V or VL | 3 |
| Negative supply current I- (12 V) | I- | -1 | -9e-05 | | μA | Room | 3 |
| Negative supply current I- (12 V) | I- | -5 | | | μA | Full | 3 |
| Logic supply current IL (12 V) | IL | | 2e-05 | 1 | μA | Room | 3 |
| Logic supply current IL (12 V) | IL | | | 5 | μA | Full | 3 |
| Ground current IGND (12 V) | IGND | -1 | -2e-05 | | μA | Room | 3 |
| Ground current IGND (12 V) | IGND | -5 | | | μA | Full | 3 |
| Drain-source on-resistance (±5 V) | RDS(on) | | 12 | 15 | | Room; V+ = 5 V, V- = -5 V; INO, INC = 5 mA, VCOM = ±3.5 V; DG419LE only | 4 |
| Drain-source on-resistance (±5 V) | RDS(on) | | | 21 | | Full; V+ = 5 V, V- = -5 V; INO, INC = 5 mA, VCOM = ±3.5 V; DG419LE only | 4 |
| Switch off leakage current INO(off) INC(off) (±5 V) | INO(off) | -2 | 0.001 | 2 | nA | Room; V+ = 5.5 V, V- = -5.5 V; VCOM = ±4.5 V; VNO, VNC = ±4.5 V | 4 |
| Switch off leakage current INO(off) INC(off) (±5 V) | INO(off) | -10 | | 10 | nA | Full; V+ = 5.5 V, V- = -5.5 V; VCOM = ±4.5 V; VNO, VNC = ±4.5 V | 4 |
| Switch off leakage current ICOM(off) (±5 V) | ICOM(off) | -2 | 0.002 | 2 | nA | Room; V+ = 5.5 V, V- = -5.5 V; VCOM = ±4.5 V; VNO, VNC = ±4.5 V | 4 |
| Switch off leakage current ICOM(off) (±5 V) | ICOM(off) | -10 | | 10 | nA | Full; V+ = 5.5 V, V- = -5.5 V; VCOM = ±4.5 V; VNO, VNC = ±4.5 V | 4 |
| Channel on leakage current ICOM(on) (±5 V) | ICOM(on) | -2 | 0.003 | 2 | nA | Room; V+ = 5.5 V, V- = -5.5 V; VNO, VNC = VCOM = ±4.5 V | 4 |
| Channel on leakage current ICOM(on) (±5 V) | ICOM(on) | -10 | | 10 | nA | Full; V+ = 5.5 V, V- = -5.5 V; VNO, VNC = VCOM = ±4.5 V | 4 |
| Input current IINL or IINH (±5 V) | IINL or IINH | -1 | 0.02 | 1 | μA | Full | 4 |
| Turn-on time (±5 V) | tON | | 21 | 38 | ns | Room; RL = 300, CL = 35 pF; VNO, VNC = ±3.5 V | 4 |
| Turn-on time (±5 V) | tON | | | 40 | ns | Full; RL = 300, CL = 35 pF; VNO, VNC = ±3.5 V | 4 |
| Turn-off time (±5 V) | tOFF | | 20 | 45 | ns | Room | 4 |
| Turn-off time (±5 V) | tOFF | | | 50 | ns | Full | 4 |
| Positive supply current I+ (±5 V) | I+ | | 7e-05 | 1 | μA | Room; VIN = 0 V or VL | 4 |
| Positive supply current I+ (±5 V) | I+ | | | 5 | μA | Full; VIN = 0 V or VL | 4 |
| Negative supply current I- (±5 V) | I- | -1 | -9e-05 | | μA | Room | 4 |
| Negative supply current I- (±5 V) | I- | -5 | | | μA | Full | 4 |
| Logic supply current IL (±5 V) | IL | | 2e-05 | 1 | μA | Room | 4 |
| Logic supply current IL (±5 V) | IL | | | 5 | μA | Full | 4 |
| Ground current IGND (±5 V) | IGND | -1 | -3e-05 | | μA | Room | 4 |
| Ground current IGND (±5 V) | IGND | -5 | | | μA | Full | 4 |
## CAD (KiCad official)
- Symbol: `DG419LEDQ-T1-GE3`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `dg419ledq-t1-ge3-etched.step` / `dg419ledq-t1-ge3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `dg419ledq-t1-ge3.step` / `dg419ledq-t1-ge3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Vishay Intertech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588941673576976384) (15 pp, sha256 `713fad1c6becd408`, retrieved 2026-10-21, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/dg419ledq-t1-ge3-datasheet.pdf)