component
DG202BDQ-T1-E3
Public Made by Adomby adom
Vishay Intertech Analog Switches, Multiplexers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
DG202BDQ-T1-E3
Vishay Intertech · Analog Switches, Multiplexers · TSSOP-16
DG202BDQ-T1-E3 from Vishay Intertech, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN1 | input | Logic input for switch 1, TTL and CMOS compatible with a logic 0 at up to 0.8 V and a logic 1 at 2.4 V or higher; on the DG202B, logic 1 turns the switch on. |
| 2 | D1 | passive | Drain terminal of switch 1, which passes true bidirectional signals when on and blocks signals to the supplies when off; signals beyond V+ or V- are clamped by internal diodes. |
| 3 | S1 | passive | Source terminal of switch 1, with an analog signal range of ±15 V tested at V+ = 15 V and V- = -15 V and a continuous input up to ±22 V; signals beyond V+ or V- are clamped by internal diodes. |
| 4 | V- | power_in | Negative supply rail, rated for continuous operation from -4.5 V to -22 V, or tied to 0 V for single-supply operation from +4.5 V to +25 V. |
| 5 | GND | power_in | Ground reference for the logic inputs, with voltages referenced to GND rated to 25 V absolute maximum. |
| 6 | S4 | passive | Source terminal of switch 4, with an analog signal range of ±15 V tested at V+ = 15 V and V- = -15 V and signals beyond V+ or V- clamped by internal diodes. |
| 7 | D4 | passive | Drain terminal of switch 4, which passes true bidirectional signals when on and blocks signals to the supplies when off. |
| 8 | IN4 | input | Logic input for switch 4, TTL and CMOS compatible with a logic 0 at up to 0.8 V and a logic 1 at 2.4 V or higher; on the DG202B, logic 1 turns the switch on. |
| 9 | IN3 | input | Logic input for switch 3, TTL and CMOS compatible with a logic 0 at up to 0.8 V and a logic 1 at 2.4 V or higher; on the DG202B, logic 1 turns the switch on. |
| 10 | D3 | passive | Drain terminal of switch 3, which passes true bidirectional signals when on and blocks signals to the supplies when off. |
| 11 | S3 | passive | Source terminal of switch 3, with an analog signal range of ±15 V tested at V+ = 15 V and V- = -15 V and signals beyond V+ or V- clamped by internal diodes. |
| 12 | NC | unconnected | Labelled NC in the pin configuration; the datasheet states no function for this pin. |
| 13 | V+ | power_in | Positive supply rail, rated for continuous operation from +4.5 V to +22 V in dual supply or up to +25 V single supply, with V+ to V- rated to 44 V absolute maximum. |
| 14 | S2 | passive | Source terminal of switch 2, with an analog signal range of ±15 V tested at V+ = 15 V and V- = -15 V and signals beyond V+ or V- clamped by internal diodes. |
| 15 | D2 | passive | Drain terminal of switch 2, which passes true bidirectional signals when on and blocks signals to the supplies when off. |
| 16 | IN2 | input | Logic input for switch 2, TTL and CMOS compatible with a logic 0 at up to 0.8 V and a logic 1 at 2.4 V or higher; on the DG202B, logic 1 turns the switch on. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog Signal Range (dual supply, D suffix) | VANALOG | -15 | 15 | V | V+ = 15 V, V- = -15 V (unless specified); Full | 3 | |
| Drain-Source On-Resistance (dual supply, Room) | RDS(on) | 45 | 85 | Ω | V+ = 15 V, V- = -15 V; VD = ± 10 V, IS = 1 mA; Room | 3 | |
| Drain-Source On-Resistance (dual supply, Full) | RDS(on) | 100 | Ω | V+ = 15 V, V- = -15 V; VD = ± 10 V, IS = 1 mA; Full | 3 | ||
| Source Off Leakage Current (dual supply, Room) | IS(off) | -0.5 | 0.5 | nA | V+ = 15 V, V- = -15 V; VS = ± 14 V, VD = ± 14 V; Room | 3 | |
| Source Off Leakage Current (dual supply, Full) | IS(off) | -5 | 5 | nA | V+ = 15 V, V- = -15 V; VS = ± 14 V, VD = ± 14 V; Full | 3 | |
| Drain Off Leakage Current (dual supply, Room) | ID(off) | -0.5 | 0.5 | nA | V+ = 15 V, V- = -15 V; VD = ± 14 V, VS = ± 14 V; Room | 3 | |
| Drain Off Leakage Current (dual supply, Full) | ID(off) | -5 | 5 | nA | V+ = 15 V, V- = -15 V; VD = ± 14 V, VS = ± 14 V; Full | 3 | |
| Drain On Leakage Current (dual supply, Room) | ID(on) | -0.5 | 0.5 | nA | V+ = 15 V, V- = -15 V; VS = VD = ± 14 V; Room | 3 | |
| Drain On Leakage Current (dual supply, Full) | ID(on) | -10 | 10 | nA | V+ = 15 V, V- = -15 V; VS = VD = ± 14 V; Full | 3 | |
| Input Voltage High | VINH | 2.4 | V | Full | 3 | ||
| Input Voltage Low | VINL | 0.8 | V | Full | 3 | ||
| Input Current | IINH or IINL | -1 | 1 | µA | VINH or VINL; Full | 3 | |
| Turn-On Time (dual supply) | tON | 120 | 300 | ns | V+ = 15 V, V- = -15 V; VS = 2 V; max printed on Full row | 3 | |
| Turn-Off Time (dual supply) | tOFF | 65 | 200 | ns | V+ = 15 V, V- = -15 V; max printed on Full row | 3 | |
| Positive Supply Current (dual supply, Room) | I+ | 50 | µA | V+ = 15 V, V- = -15 V; VIN = 0 or 5 V; Room | 3 | ||
| Positive Supply Current (dual supply, Full) | I+ | 100 | µA | V+ = 15 V, V- = -15 V; VIN = 0 or 5 V; Full | 3 | ||
| Negative Supply Current (dual supply, Room) | I- | -1 | µA | V+ = 15 V, V- = -15 V; VIN = 0 or 5 V; Room | 3 | ||
| Negative Supply Current (dual supply, Full) | I- | -5 | µA | V+ = 15 V, V- = -15 V; VIN = 0 or 5 V; Full | 3 | ||
| Power Supply Range for Continuous Operation (dual supply) | VOP | 4.5 | 22 | V | Full; printed as ± 4.5 V to ± 22 V | 3 | |
| Analog Signal Range (single supply) | VANALOG | 0 | 12 | V | V+ = 12 V, V- = 0 V (unless specified); Full | 4 | |
| Drain-Source On-Resistance (single supply, Room) | RDS(on) | 90 | 160 | Ω | V+ = 12 V, V- = 0 V; VD = 3 V, 8 V, IS = 1 mA; Room | 4 | |
| Drain-Source On-Resistance (single supply, Full) | RDS(on) | 200 | Ω | V+ = 12 V, V- = 0 V; VD = 3 V, 8 V, IS = 1 mA; Full | 4 | ||
| Turn-On Time (single supply) | tON | 120 | 300 | ns | V+ = 12 V, V- = 0 V; VS = 8 V; Room | 4 | |
| Turn-Off Time (single supply) | tOFF | 60 | 200 | ns | V+ = 12 V, V- = 0 V; Room | 4 | |
| Positive Supply Current (single supply, Room) | I+ | 50 | µA | V+ = 12 V, V- = 0 V; VIN = 0 or 5 V; Room | 4 | ||
| Positive Supply Current (single supply, Full) | I+ | 100 | µA | V+ = 12 V, V- = 0 V; VIN = 0 or 5 V; Full | 4 | ||
| Negative Supply Current (single supply, Room) | I- | -1 | µA | V+ = 12 V, V- = 0 V; VIN = 0 or 5 V; Room | 4 | ||
| Negative Supply Current (single supply, Full) | I- | -5 | µA | V+ = 12 V, V- = 0 V; VIN = 0 or 5 V; Full | 4 | ||
| Power Supply Range for Continuous Operation (single supply) | VOP | 4.5 | 25 | V | Full; printed as + 4.5 V to + 25 V | 4 | |
| Voltage referenced V+ to V- | V | 44 | V | 2 | |||
| Voltage referenced to GND | V GND | 25 | V | 2 | |||
| Current (any terminal) | 30 | mA | 2 | ||||
| Peak Current S or D | 100 | mA | Pulsed at 1 ms, 10% duty cycle max. | 2 | |||
| Storage Temperature (DQ suffix) | -65 | 125 | °C | DQ suffix | 2 | ||
| Power Dissipation (16-pin narrow SOIC and TSSOP) | 640 | mW | Derate 7.6 mW/°C above 75 °C | 2 | |||
| Operating Temperature Range (D suffix, TSSOP) | -40 | 85 | °C | D suffix (-40 °C to 85 °C per ordering table) | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Pc | 16-pin plastic DIPc 470 | 2 |
CAD (KiCad official)
- Symbol:
DG202BDQ-T1-E3 - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
dg202bdq-t1-e3-etched.step/dg202bdq-t1-e3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dg202bdq-t1-e3.step/dg202bdq-t1-e3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (15 pp, sha256
139cc64b74f5ed7c, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# DG202BDQ-T1-E3
**Vishay Intertech** · Analog Switches, Multiplexers · TSSOP-16
DG202BDQ-T1-E3 from Vishay Intertech, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN1 | input | Logic input for switch 1, TTL and CMOS compatible with a logic 0 at up to 0.8 V and a logic 1 at 2.4 V or higher; on the DG202B, logic 1 turns the switch on. |
| 2 | D1 | passive | Drain terminal of switch 1, which passes true bidirectional signals when on and blocks signals to the supplies when off; signals beyond V+ or V- are clamped by internal diodes. |
| 3 | S1 | passive | Source terminal of switch 1, with an analog signal range of ±15 V tested at V+ = 15 V and V- = -15 V and a continuous input up to ±22 V; signals beyond V+ or V- are clamped by internal diodes. |
| 4 | V- | power_in | Negative supply rail, rated for continuous operation from -4.5 V to -22 V, or tied to 0 V for single-supply operation from +4.5 V to +25 V. |
| 5 | GND | power_in | Ground reference for the logic inputs, with voltages referenced to GND rated to 25 V absolute maximum. |
| 6 | S4 | passive | Source terminal of switch 4, with an analog signal range of ±15 V tested at V+ = 15 V and V- = -15 V and signals beyond V+ or V- clamped by internal diodes. |
| 7 | D4 | passive | Drain terminal of switch 4, which passes true bidirectional signals when on and blocks signals to the supplies when off. |
| 8 | IN4 | input | Logic input for switch 4, TTL and CMOS compatible with a logic 0 at up to 0.8 V and a logic 1 at 2.4 V or higher; on the DG202B, logic 1 turns the switch on. |
| 9 | IN3 | input | Logic input for switch 3, TTL and CMOS compatible with a logic 0 at up to 0.8 V and a logic 1 at 2.4 V or higher; on the DG202B, logic 1 turns the switch on. |
| 10 | D3 | passive | Drain terminal of switch 3, which passes true bidirectional signals when on and blocks signals to the supplies when off. |
| 11 | S3 | passive | Source terminal of switch 3, with an analog signal range of ±15 V tested at V+ = 15 V and V- = -15 V and signals beyond V+ or V- clamped by internal diodes. |
| 12 | NC | unconnected | Labelled NC in the pin configuration; the datasheet states no function for this pin. |
| 13 | V+ | power_in | Positive supply rail, rated for continuous operation from +4.5 V to +22 V in dual supply or up to +25 V single supply, with V+ to V- rated to 44 V absolute maximum. |
| 14 | S2 | passive | Source terminal of switch 2, with an analog signal range of ±15 V tested at V+ = 15 V and V- = -15 V and signals beyond V+ or V- clamped by internal diodes. |
| 15 | D2 | passive | Drain terminal of switch 2, which passes true bidirectional signals when on and blocks signals to the supplies when off. |
| 16 | IN2 | input | Logic input for switch 2, TTL and CMOS compatible with a logic 0 at up to 0.8 V and a logic 1 at 2.4 V or higher; on the DG202B, logic 1 turns the switch on. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog Signal Range (dual supply, D suffix) | VANALOG | -15 | | 15 | V | V+ = 15 V, V- = -15 V (unless specified); Full | 3 |
| Drain-Source On-Resistance (dual supply, Room) | RDS(on) | | 45 | 85 | Ω | V+ = 15 V, V- = -15 V; VD = ± 10 V, IS = 1 mA; Room | 3 |
| Drain-Source On-Resistance (dual supply, Full) | RDS(on) | | | 100 | Ω | V+ = 15 V, V- = -15 V; VD = ± 10 V, IS = 1 mA; Full | 3 |
| Source Off Leakage Current (dual supply, Room) | IS(off) | -0.5 | | 0.5 | nA | V+ = 15 V, V- = -15 V; VS = ± 14 V, VD = ± 14 V; Room | 3 |
| Source Off Leakage Current (dual supply, Full) | IS(off) | -5 | | 5 | nA | V+ = 15 V, V- = -15 V; VS = ± 14 V, VD = ± 14 V; Full | 3 |
| Drain Off Leakage Current (dual supply, Room) | ID(off) | -0.5 | | 0.5 | nA | V+ = 15 V, V- = -15 V; VD = ± 14 V, VS = ± 14 V; Room | 3 |
| Drain Off Leakage Current (dual supply, Full) | ID(off) | -5 | | 5 | nA | V+ = 15 V, V- = -15 V; VD = ± 14 V, VS = ± 14 V; Full | 3 |
| Drain On Leakage Current (dual supply, Room) | ID(on) | -0.5 | | 0.5 | nA | V+ = 15 V, V- = -15 V; VS = VD = ± 14 V; Room | 3 |
| Drain On Leakage Current (dual supply, Full) | ID(on) | -10 | | 10 | nA | V+ = 15 V, V- = -15 V; VS = VD = ± 14 V; Full | 3 |
| Input Voltage High | VINH | 2.4 | | | V | Full | 3 |
| Input Voltage Low | VINL | | | 0.8 | V | Full | 3 |
| Input Current | IINH or IINL | -1 | | 1 | µA | VINH or VINL; Full | 3 |
| Turn-On Time (dual supply) | tON | | 120 | 300 | ns | V+ = 15 V, V- = -15 V; VS = 2 V; max printed on Full row | 3 |
| Turn-Off Time (dual supply) | tOFF | | 65 | 200 | ns | V+ = 15 V, V- = -15 V; max printed on Full row | 3 |
| Positive Supply Current (dual supply, Room) | I+ | | | 50 | µA | V+ = 15 V, V- = -15 V; VIN = 0 or 5 V; Room | 3 |
| Positive Supply Current (dual supply, Full) | I+ | | | 100 | µA | V+ = 15 V, V- = -15 V; VIN = 0 or 5 V; Full | 3 |
| Negative Supply Current (dual supply, Room) | I- | -1 | | | µA | V+ = 15 V, V- = -15 V; VIN = 0 or 5 V; Room | 3 |
| Negative Supply Current (dual supply, Full) | I- | -5 | | | µA | V+ = 15 V, V- = -15 V; VIN = 0 or 5 V; Full | 3 |
| Power Supply Range for Continuous Operation (dual supply) | VOP | 4.5 | | 22 | V | Full; printed as ± 4.5 V to ± 22 V | 3 |
| Analog Signal Range (single supply) | VANALOG | 0 | | 12 | V | V+ = 12 V, V- = 0 V (unless specified); Full | 4 |
| Drain-Source On-Resistance (single supply, Room) | RDS(on) | | 90 | 160 | Ω | V+ = 12 V, V- = 0 V; VD = 3 V, 8 V, IS = 1 mA; Room | 4 |
| Drain-Source On-Resistance (single supply, Full) | RDS(on) | | | 200 | Ω | V+ = 12 V, V- = 0 V; VD = 3 V, 8 V, IS = 1 mA; Full | 4 |
| Turn-On Time (single supply) | tON | | 120 | 300 | ns | V+ = 12 V, V- = 0 V; VS = 8 V; Room | 4 |
| Turn-Off Time (single supply) | tOFF | | 60 | 200 | ns | V+ = 12 V, V- = 0 V; Room | 4 |
| Positive Supply Current (single supply, Room) | I+ | | | 50 | µA | V+ = 12 V, V- = 0 V; VIN = 0 or 5 V; Room | 4 |
| Positive Supply Current (single supply, Full) | I+ | | | 100 | µA | V+ = 12 V, V- = 0 V; VIN = 0 or 5 V; Full | 4 |
| Negative Supply Current (single supply, Room) | I- | -1 | | | µA | V+ = 12 V, V- = 0 V; VIN = 0 or 5 V; Room | 4 |
| Negative Supply Current (single supply, Full) | I- | -5 | | | µA | V+ = 12 V, V- = 0 V; VIN = 0 or 5 V; Full | 4 |
| Power Supply Range for Continuous Operation (single supply) | VOP | 4.5 | | 25 | V | Full; printed as + 4.5 V to + 25 V | 4 |
| Voltage referenced V+ to V- | V | | | 44 | V | | 2 |
| Voltage referenced to GND | V GND | | | 25 | V | | 2 |
| Current (any terminal) | | | | 30 | mA | | 2 |
| Peak Current S or D | | | | 100 | mA | Pulsed at 1 ms, 10% duty cycle max. | 2 |
| Storage Temperature (DQ suffix) | | -65 | | 125 | °C | DQ suffix | 2 |
| Power Dissipation (16-pin narrow SOIC and TSSOP) | | | | 640 | mW | Derate 7.6 mW/°C above 75 °C | 2 |
| Operating Temperature Range (D suffix, TSSOP) | | -40 | | 85 | °C | D suffix (-40 °C to 85 °C per ordering table) | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Pc | | 16-pin plastic DIPc 470 | 2 |
## CAD (KiCad official)
- Symbol: `DG202BDQ-T1-E3`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `dg202bdq-t1-e3-etched.step` / `dg202bdq-t1-e3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `dg202bdq-t1-e3.step` / `dg202bdq-t1-e3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Vishay Intertech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588941340457504768) (15 pp, sha256 `139cc64b74f5ed7c`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/dg202bdq-t1-e3-datasheet.pdf)