component

DAC8750IRHAR

Public Made by Adom

by adom

Texas Instruments Digital To Analog Converters (DAC), VQFN-40-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentdata acquisitiondac8750irharfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 14d ago
viewers dac8750irhar: viewers · Ray 14d ago
dac8750irhar-etched.glb dac8750irhar: factory component page (tier=lcsc) · Ray 14d ago
dac8750irhar-etched.step dac8750irhar: factory component page (tier=lcsc) · Ray 14d ago
dac8750irhar-hero.glb dac8750irhar: hero GLB from the etched model (keeps the MPN mark) · Ray 14d ago
dac8750irhar-hero.overlay.json Publish 0.1.0 · Ray 14d ago
dac8750irhar.glb Publish 0.1.0 · Ray 14d ago
dac8750irhar.kicad_mod Publish 0.1.0 · Ray 14d ago
dac8750irhar.kicad_sym Publish 0.1.0 · Ray 14d ago
dac8750irhar.lbr Publish 0.1.0 · Ray 14d ago
dac8750irhar.step Publish 0.1.0 · Ray 14d ago
package.json Publish 0.1.0 · Ray 14d ago
page.json Set visibility: public · Ray 14d ago
README.md Publish 0.1.0 · Ray 14d ago

DAC8750IRHAR

Texas Instruments · Digital To Analog Converters (DAC) · VQFN-40-EP(6x6)

DAC8750IRHAR from Texas Instruments, in a VQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connection.
2 ALARM output Open-drain alarm output that goes low when an alarm condition (open circuit, over temperature, timeout, and so on) is detected, and requires an external 10 kΩ pullup resistor.
3 GND power_in Ground reference point for all digital circuitry of the device.
4 GND power_in Ground reference point for all digital circuitry of the device.
5 CLR input Active-high clear input; a logic high on this pin causes the part to enter the CLEAR state.
6 LATCH input Load DAC registers input; a rising edge loads the input shift register data into the DAC data and control registers and updates the DAC output.
7 SCLK input Serial clock input of the SPI with Schmitt-trigger logic, supporting data transfer at rates up to 30 MHz.
8 DIN input Serial data input clocked into the 24-bit input shift register on the rising edge of the serial clock, with Schmitt-trigger logic.
9 SDO output Serial data output whose data are valid on the rising edge of SCLK.
10 NC unconnected No connection.
11 NC unconnected No connection.
12 GND power_in Ground reference point for all analog circuitry of the device.
13 GND power_in Ground reference point for all analog circuitry of the device.
14 GND power_in Ground reference point for all analog circuitry of the device.
15 GND power_in Ground reference point for all analog circuitry of the device.
16 ISET-R input Connection pin for an external precision resistor of 15 kΩ.
17 REFOUT output Internal reference output that connects to REFIN when the internal reference is used.
18 REFIN input Reference input, with a reference input voltage of 4.95 V to 5.05 V in the recommended operating conditions.
19 NC unconnected No connection.
20 NC unconnected No connection.
21 NC unconnected No connection.
22 NC unconnected No connection.
23 DVDD-EN input Internal power-supply enable: connect to GND to disable the internal supply (an external supply must then be applied to DVDD), or leave unconnected to enable it.
24 HART-IN input Analog input pin for HART modulation superimposed on the current output.
25 R3-SENSE output Output-current monitoring pin; the voltage between R3-SENSE and BOOST is directly proportional to the output current.
26 IOUT output Current output pin; loop compliance voltage is AVDD - 2 V at 24 mA output.
27 BOOST output Boost pin for an optional external transistor connection.
28 CAP1 input Optional connection for an output filtering capacitor.
29 CAP2 input Optional connection for an output filtering capacitor.
30 NC unconnected No connection.
31 NC unconnected No connection.
32 NC unconnected No connection.
33 NC unconnected No connection.
34 NC unconnected No connection.
35 NC unconnected No connection.
36 AVDD power_in Positive analog power supply, specified from 10 V to 36 V.
37 GND power_in Ground reference point for all analog circuitry of the device.
38 NC unconnected No connection.
39 DVDD power_in Digital power supply, 2.7 V to 5.5 V, which can be an input or an output depending on the DVDD-EN pin.
40 NC unconnected No connection.
41 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-40-EP(6x6)
Category Data Acquisition
Pins 41

CAD (KiCad official)

  • Symbol: DAC8750IRHAR
  • Footprint: Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm
  • 3D model: VQFN-40-EP(6x6) (KiCad packages3D, STEP)
  • 3D model files: dac8750irhar-etched.step / dac8750irhar-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); dac8750irhar.step / dac8750irhar.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (58 pp, sha256 204cb50cd17b9ae3, retrieved 2026-10-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF