component
DAC8571IDGKR
Public Made by Adomby adom
Texas Instruments Digital To Analog Converters (DAC), MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownDAC8571IDGKR
Texas Instruments · Digital To Analog Converters (DAC) · MSOP-8
DAC8571IDGKR from Texas Instruments, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Analog voltage supply input, 2.7 V to 5.5 V operating range. |
| 2 | VREF | power_in | Positive reference voltage input, 0 V to VDD operating range, 140 kΩ input impedance. |
| 3 | V(SENSE) | power_in | Analog output sense input, inverting terminal of output amplifier brought out through feedback resistor for remote load sensing applications. |
| 4 | VOUT | output | Analog output voltage from DAC, 0 V to VREF operating range with rail-to-rail output capability, 10 µs settling time to ±0.003% FSR. |
| 5 | A0 | input | Device I2C address select input, determines one bit of 7-bit slave address, can be tied to VDD or GND or driven by TTL/CMOS logic levels. |
| 6 | SCL | input | Serial clock input for I2C interface supporting standard (100 kHz), fast (400 kHz), and high-speed (3.4 MHz) operation modes. |
| 7 | SDA | bidirectional | Serial data input/output for I2C interface, bidirectional open-drain signal supporting all I2C speed modes. |
| 8 | GND | power_in | Ground reference point for all circuitry on the part. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8 |
| Category | Data Acquisition |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
DAC8571IDGKR - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
dac8571idgkr-etched.step/dac8571idgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dac8571idgkr.step/dac8571idgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
56d1011b3f895230, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).