component
DAC8555IPW
Public Made by Adomby adom
Texas Instruments Digital To Analog Converters (DAC), TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# DAC8555IPW++**Texas Instruments** · Digital To Analog Converters (DAC) · TSSOP-16++DAC8555IPW from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VOUTA | output | Analog output voltage from DAC A, output voltage range 0 to VREFH V. |+| 2 | VOUTB | output | Analog output voltage from DAC B, output voltage range 0 to VREFH V. |+| 3 | VREFH | input | Positive reference voltage input, voltage range 0 to AVDD V. |+| 4 | AVDD | power_in | Power supply input, supply voltage range 2.7V to 5.5V. |+| 5 | VREFL | input | Negative reference voltage input, voltage range 0 to AVDD/2 V. |+| 6 | GND | power_in | Ground reference point for all circuitry on the device. |+| 7 | VOUTC | output | Analog output voltage from DAC C, output voltage range 0 to VREFH V. |+| 8 | VOUTD | output | Analog output voltage from DAC D, output voltage range 0 to VREFH V. |+| 9 | SYNC | input | Frame synchronization control input (active LOW) that enables the 24-bit input shift register. |+| 10 | SCLK | input | Serial clock input supporting data transfer rates up to 50MHz with Schmitt-trigger logic. |+| 11 | DIN | input | Serial data input clocked into the 24-bit shift register on falling edges of SCLK with Schmitt-trigger logic. |+| 12 | IOVDD | power_in | Digital input-output power supply with voltage range 1.8V to 5.5V. |+| 13 | RST | input | Asynchronous reset input (active LOW) that resets all DAC channels to zero-scale or midscale based on RSTSEL. |+| 14 | RSTSEL | input | Reset select input that determines reset voltage (LOW = zero-scale, HIGH = midscale) and input coding (binary or 2's complement). |+| 15 | ENABLE | input | Active LOW control input that connects the SPI interface to the serial port. |+| 16 | LDAC | input | Rising-edge triggered input that loads all DAC output registers. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Data Acquisition |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `DAC8555IPW`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `dac8555ipw-etched.step` / `dac8555ipw-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `dac8555ipw.step` / `dac8555ipw.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/dac8555) (31 pp, sha256 `f63797dbf9ec2a01`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/dac8555ipw-datasheet.pdf)
page.jsonadded+203@@ -0,0 +1,203 @@+{+ "slug": "dac8555ipw",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Digital To Analog Converters (DAC), TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "dac8555ipw",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "dac8555ipw.kicad_sym",+ "dac8555ipw.kicad_mod",+ "dac8555ipw.glb",+ "dac8555ipw.step",+ "dac8555ipw.lbr",+ "docs/hero.png",+ "docs/dac8555ipw-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "DAC8555IPW",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-16",+ "pin_count": 16,+ "category": "Data Acquisition",+ "subcategory": "Digital To Analog Converters (DAC)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/dac8555",+ "parts": {+ "symbol": "dac8555ipw.kicad_sym",+ "footprint": "dac8555ipw.kicad_mod",+ "model_3d": "dac8555ipw-etched.glb",+ "model_3d_plain": "dac8555ipw.glb",+ "model_3d_step": "dac8555ipw-etched.step",+ "model_3d_step_plain": "dac8555ipw.step",+ "lbr": "dac8555ipw.lbr"+ },+ "distributor_links": {+ "lcsc": "C1554484",+ "digikey": "296-19402-5-ND",+ "mouser": "595-DAC8555IPW"+ },+ "distributor_check": {+ "checked_at": "2026-10-01T05:10:03Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-19402-5-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-DAC8555IPW",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VOUTA",+ "type": "output",+ "description": "Analog output voltage from DAC A, output voltage range 0 to VREFH V."+ },+ {+ "number": "2",+ "name": "VOUTB",+ "type": "output",+ "description": "Analog output voltage from DAC B, output voltage range 0 to VREFH V."+ },+ {+ "number": "3",+ "name": "VREFH",+ "type": "input",+ "description": "Positive reference voltage input, voltage range 0 to AVDD V."+ },+ {+ "number": "4",+ "name": "AVDD",+ "type": "power_in",+ "description": "Power supply input, supply voltage range 2.7V to 5.5V."+ },+ {+ "number": "5",+ "name": "VREFL",+ "type": "input",+ "description": "Negative reference voltage input, voltage range 0 to AVDD/2 V."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference point for all circuitry on the device."+ },+ {+ "number": "7",+ "name": "VOUTC",+ "type": "output",+ "description": "Analog output voltage from DAC C, output voltage range 0 to VREFH V."+ },+ {+ "number": "8",+ "name": "VOUTD",+ "type": "output",+ "description": "Analog output voltage from DAC D, output voltage range 0 to VREFH V."+ },+ {+ "number": "9",+ "name": "SYNC",+ "type": "input",+ "description": "Frame synchronization control input (active LOW) that enables the 24-bit input shift register."+ },+ {+ "number": "10",+ "name": "SCLK",+ "type": "input",+ "description": "Serial clock input supporting data transfer rates up to 50MHz with Schmitt-trigger logic."+ },+ {+ "number": "11",+ "name": "DIN",+ "type": "input",+ "description": "Serial data input clocked into the 24-bit shift register on falling edges of SCLK with Schmitt-trigger logic."+ },+ {+ "number": "12",+ "name": "IOVDD",+ "type": "power_in",+ "description": "Digital input-output power supply with voltage range 1.8V to 5.5V."+ },+ {+ "number": "13",+ "name": "RST",+ "type": "input",+ "description": "Asynchronous reset input (active LOW) that resets all DAC channels to zero-scale or midscale based on RSTSEL."+ },+ {+ "number": "14",+ "name": "RSTSEL",+ "type": "input",+ "description": "Reset select input that determines reset voltage (LOW = zero-scale, HIGH = midscale) and input coding (binary or 2's complement)."+ },+ {+ "number": "15",+ "name": "ENABLE",+ "type": "input",+ "description": "Active LOW control input that connects the SPI interface to the serial port."+ },+ {+ "number": "16",+ "name": "LDAC",+ "type": "input",+ "description": "Rising-edge triggered input that loads all DAC output registers."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 8,+ "cost_usd": 0.1121,+ "at": "2026-10-01T05:09:47"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/dac8555",+ "pages": 31,+ "sha256": "f63797dbf9ec2a01",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}