component
DAC8534IPWR
Public Made by Adomby adom
Texas Instruments Digital To Analog Converters (DAC), TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownDAC8534IPWR
Texas Instruments · Digital To Analog Converters (DAC) · TSSOP-16
DAC8534IPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUTA | output | Analog output voltage from DAC A. |
| 2 | VOUTB | output | Analog output voltage from DAC B. |
| 3 | VREFH | input | Positive reference voltage input that sets the upper output range of the DACs. |
| 4 | AVDD | power_in | Power supply input, +2.7V to +5.5V. |
| 5 | VREFL | input | Negative reference voltage input. |
| 6 | GND | power_in | Ground reference point for all circuitry on the part. |
| 7 | VOUTC | output | Analog output voltage from DAC C. |
| 8 | VOUTD | output | Analog output voltage from DAC D. |
| 9 | SYNC | input | Level-triggered active-LOW frame synchronization input; the DAC updates after the 24th SCLK falling edge unless SYNC is taken HIGH first, in which case the write sequence is ignored. |
| 10 | SCLK | input | Serial clock input; data can be transferred at rates up to 30MHz. |
| 11 | DIN | input | Serial data input, clocked into the 24-bit input shift register on each falling edge of SCLK. |
| 12 | IOVDD | power_in | Digital input-output power supply, 2.7V to 5.5V. |
| 13 | A0 | input | Address 0 input that sets the device address (see Table II in the datasheet). |
| 14 | A1 | input | Address 1 input that sets the device address (see Table II in the datasheet). |
| 15 | ENABLE | input | Active-LOW enable; ENABLE LOW connects the SPI interface to the serial port. |
| 16 | LDAC | input | Load DACs input; a rising edge triggers loading of all DAC registers. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Data Acquisition |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
DAC8534IPWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
dac8534ipwr-etched.step/dac8534ipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dac8534ipwr.step/dac8534ipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
7c68df9f0d852ee0, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).