main
Ray
Publish 0.1.0
1f26962
DAC81404RHBT
Texas Instruments · Global Sourcing Parts · VQFN-32(5x5)
DAC81404RHBT from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Channel-A analog output voltage. |
| 2 | CCOMPA | input | Channel-A external compensation capacitor connection; adding a capacitor improves output buffer stability with high capacitive loads at OUTA by reducing amplifier bandwidth at the expense of increased settling time. |
| 3 | SENSEPA | input | Channel-A sense pin for the positive voltage output load connection. |
| 4 | SENSENA | input | Channel-A sense pin for the negative voltage output load connection. |
| 5 | SENSENB | input | Channel-B sense pin for the negative voltage output load connection. |
| 6 | SENSEPB | input | Channel-B sense pin for the positive voltage output load connection. |
| 7 | CCOMPB | input | Channel-B external compensation capacitor connection; adding a capacitor improves output buffer stability with high capacitive loads at OUTB by reducing amplifier bandwidth at the expense of increased settling time. |
| 8 | OUTB | output | Channel-B analog output voltage. |
| 9 | SDO | output | Serial interface data output that must be enabled by setting the SDO-EN bit before operation; data clock out on rising or falling SCLK edges as set by the FSDO bit (rising edge by default). |
| 10 | SCLK | input | Serial interface clock. |
| 11 | SDIN | input | Serial interface data input; data are clocked into the input shift register on each falling edge of SCLK. |
| 12 | SYNC | input | Active-low serial data enable; the serial interface input shift register is enabled when SYNC is low. |
| 13 | LDAC | input | Active-low synchronization signal that updates DAC outputs of synchronous-mode channels simultaneously when low; connect to IOVDD if unused. |
| 14 | GND | power_in | Digital ground reference point. |
| 15 | IOVDD | power_in | IO supply voltage that sets the digital I/O operating voltage for the device. |
| 16 | CLR | input | Active-low clear input; logic low clears all outputs to their clear code; connect to IOVDD if unused. |
| 17 | OUTC | output | Channel-C analog output voltage. |
| 18 | CCOMPC | input | Channel-C external compensation capacitor connection; adding a capacitor improves output buffer stability with high capacitive loads at OUTC by reducing amplifier bandwidth at the expense of increased settling time. |
| 19 | SENSEPC | input | Channel-C sense pin for the positive voltage output load connection. |
| 20 | SENSENC | input | Channel-C sense pin for the negative voltage output load connection. |
| 21 | SENSEND | input | Channel-D sense pin for the negative voltage output load connection. |
| 22 | SENSEPD | input | Channel-D sense pin for the positive voltage output load connection. |
| 23 | CCOMPD | input | Channel-D external compensation capacitor connection; adding a capacitor improves output buffer stability with high capacitive loads at OUTD by reducing amplifier bandwidth at the expense of increased settling time. |
| 24 | OUTD | output | Channel-D analog output voltage. |
| 25 | REFGND | power_in | Ground reference point for the internal reference. |
| 26 | REFIO | bidirectional | Reference input when operating with an external reference, or reference output when using the internal reference; connect a 150-nF capacitor to ground. |
| 27 | AVSS | power_in | Output buffers negative supply voltage. |
| 28 | AVDD | power_in | Output buffers positive supply voltage. |
| 29 | AGND | power_in | Analog ground reference point. |
| 30 | DVDD | power_in | Digital and analog supply voltage. |
| 31 | FAULT | output | Open-drain fault-condition output that requires an external 10-kΩ pullup resistor to a voltage no higher than IOVDD. |
| 32 | RST | input | Active-low reset input; logic low causes the device to issue a power-on-reset event. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | Global Sourcing Parts |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage DVDD to GND | DVDD | -0.3 | 6 | V | 5 | ||
| Supply voltage IOVDD to GND | IOVDD | -0.3 | 6 | V | 5 | ||
| Supply voltage AVDD to GND | AVDD | -0.3 | 44 | V | 5 | ||
| Supply voltage AVSS to GND | AVSS | -22 | 0.3 | V | 5 | ||
| Supply voltage AVDD to AVSS | -0.3 | 44 | V | 5 | |||
| FAULT pin voltage to GND | FAULT | -0.3 | 6 | V | 5 | ||
| Input current into any digital pin | -10 | 10 | mA | 5 | |||
| Junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -60 | 150 | °C | 5 | ||
| Supply voltage DVDD to GND | DVDD | 4.5 | 5.5 | V | 6 | ||
| Supply voltage IOVDD to GND | IOVDD | 1.7 | 5.5 | V | 6 | ||
| Supply voltage AVDD to GND | AVDD | 4.5 | 41.5 | V | 6 | ||
| Supply voltage AVSS to GND | AVSS | -21.5 | 0 | V | 6 | ||
| Supply voltage AVDD to AVSS | 4.5 | 43 | V | 6 | |||
| Pin voltage VSENSENX to GND | VSENSENX | -12 | 12 | V | 6 | ||
| Ambient temperature | TA | -40 | 125 | °C | 6 | ||
| INL relative accuracy | INL | -1 | 1 | LSB | DAC81404. All ranges, except 0-V to 40-V and overranges | 7 | |
| INL relative accuracy | INL | -2 | 2 | LSB | DAC81404. 0-V to 40-V range | 7 | |
| Differential nonlinearity | DNL | -1 | 1 | LSB | 7 | ||
| Total unadjusted error | TUE | -0.07 | 0.07 | %FSR | Unipolar ranges, AVSS = 0 V | 7 | |
| Total unadjusted error | TUE | -0.05 | 0.05 | %FSR | Unipolar ranges, AVSS = 0 V, 0°C ≤ TA ≤ 50° | 7 | |
| Offset error | -0.05 | 0.05 | %FSR | Bipolar ranges, -21.5 V ≤ AVSS < 0 V | 7 | ||
| Offset error temperature coefficient | -2 | 2 | ppmFSR/°C | Bipolar ranges, -21.5 V ≤ AVSS < 0 V | 7 | ||
| Zero-code (negative full scale) error | 0.15 | %FSR | All unipolar ranges, AVSS = 0 V | 7 | |||
| Zero-code (negative full scale) error | 0.05 | %FSR | All bipolar ranges, -21.5 V ≤ AVSS < 0 V | 7 | |||
| Zero-code (negative full scale) error temperature coefficient | -2 | 2 | ppm of FSR/°C | All unipolar ranges, AVSS = 0 V; all bipolar ranges, -21.5 V ≤ AVSS < 0 V | 7 | ||
| Full-scale error | -0.06 | 0.06 | %FSR | 7 | |||
| Full-scale error temperature coefficient | -3 | 3 | ppm of FSR/°C | 7 | |||
| Gain error | -0.06 | 0.06 | %FSR | 7 | |||
| Gain error temperature coefficient | -2 | 2 | ppm of FSR/°C | 7 | |||
| Bipolar-zero (midscale) error | -0.03 | 0.03 | %FSR | All bipolar ranges, -21.5 V ≤ AVSS < 0 V | 7 | ||
| Bipolar-zero (midscale) error temperature coefficient | -2 | 2 | ppm of FSR/°C | All bipolar ranges, -21.5 V ≤ AVSS < 0 V | 7 | ||
| Output voltage drift over time | -6 | 6 | ppm FSR | TA = 40°C, DAC code = full scale, 1000 hours | 7 | ||
| Output voltage headroom and footroom to AVSS and AVDD | 1.25 | V | −10 mA ≤ load current ≤ 10 mA | 8 | |||
| Output voltage headroom and footroom to AVSS and AVDD | 1.5 | V | 5.5 V < AVDD ≤ 41.5 V, −15 mA ≤ load current ≤ 15 mA | 8 | |||
| Capacitive load | CL | 0 | 2 | nF | RLOAD = open, CCOMPX pin left floating | 8 | |
| Capacitive load | CL | 1 | µF | RLOAD = open, CCOMPX = 500 pF ± 10% to VOUTX | 8 | ||
| Load current | 15 | mA | 5.5 V < AVDD ≤ 41.5 V | 8 | |||
| Load current | 10 | mA | 4.5 V ≤ AVDD ≤ 5.5 V | 8 | |||
| Input current | -2 | 2 | µA | Digital inputs | 11 | ||
| SDO low-level output voltage | VOL | 0.4 | V | SDO load current = 0.2 mA | 11 | ||
| FAULT low-level output voltage | 0.4 | V | FAULT load current = 10 mA | 11 | |||
| Reference input voltage | VREFIO | 2.49 | 2.5 | 2.51 | V | 11 | |
| Reference input current | 50 | µA | 11 | ||||
| Internal reference output voltage | 2.4975 | 2.5025 | V | TA = 25°C | 11 | ||
| Internal reference output drift | 5 | 10 | ppm/°C | 11 | |||
| AVDD supply current | AIDD | 8 | mA | Normal mode, internal reference | 12 | ||
| AVDD supply current | AIDD | 7 | mA | Normal mode, external reference | 12 | ||
| AVDD supply current, power-down | AIDD | 10 | µA | Power-down mode | 12 | ||
| DVDD supply current | DIDD | 8 | mA | Digital interface static | 12 | ||
| Junction-to-ambient thermal resistance | RθJA | 29.3 | ℃/W | 6 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 17 | ℃/W | 6 | |||
| Junction-to-board thermal resistance | RθJB | 9.5 | ℃/W | 6 | |||
| Junction-to-top characterization parameter | ΨJT | 0.2 | ℃/W | 6 | |||
| Junction-to-board characterization parameter | ΨJB | 9.5 | ℃/W | 6 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 1.1 | ℃/W | 6 |
CAD (KiCad official)
- Symbol:
DAC81404RHBT - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
dac81404rhbt-etched.step/dac81404rhbt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dac81404rhbt.step/dac81404rhbt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (53 pp, sha256
68fb0f5dcdc3272c, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# DAC81404RHBT
**Texas Instruments** · Global Sourcing Parts · VQFN-32(5x5)
DAC81404RHBT from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Channel-A analog output voltage. |
| 2 | CCOMPA | input | Channel-A external compensation capacitor connection; adding a capacitor improves output buffer stability with high capacitive loads at OUTA by reducing amplifier bandwidth at the expense of increased settling time. |
| 3 | SENSEPA | input | Channel-A sense pin for the positive voltage output load connection. |
| 4 | SENSENA | input | Channel-A sense pin for the negative voltage output load connection. |
| 5 | SENSENB | input | Channel-B sense pin for the negative voltage output load connection. |
| 6 | SENSEPB | input | Channel-B sense pin for the positive voltage output load connection. |
| 7 | CCOMPB | input | Channel-B external compensation capacitor connection; adding a capacitor improves output buffer stability with high capacitive loads at OUTB by reducing amplifier bandwidth at the expense of increased settling time. |
| 8 | OUTB | output | Channel-B analog output voltage. |
| 9 | SDO | output | Serial interface data output that must be enabled by setting the SDO-EN bit before operation; data clock out on rising or falling SCLK edges as set by the FSDO bit (rising edge by default). |
| 10 | SCLK | input | Serial interface clock. |
| 11 | SDIN | input | Serial interface data input; data are clocked into the input shift register on each falling edge of SCLK. |
| 12 | SYNC | input | Active-low serial data enable; the serial interface input shift register is enabled when SYNC is low. |
| 13 | LDAC | input | Active-low synchronization signal that updates DAC outputs of synchronous-mode channels simultaneously when low; connect to IOVDD if unused. |
| 14 | GND | power_in | Digital ground reference point. |
| 15 | IOVDD | power_in | IO supply voltage that sets the digital I/O operating voltage for the device. |
| 16 | CLR | input | Active-low clear input; logic low clears all outputs to their clear code; connect to IOVDD if unused. |
| 17 | OUTC | output | Channel-C analog output voltage. |
| 18 | CCOMPC | input | Channel-C external compensation capacitor connection; adding a capacitor improves output buffer stability with high capacitive loads at OUTC by reducing amplifier bandwidth at the expense of increased settling time. |
| 19 | SENSEPC | input | Channel-C sense pin for the positive voltage output load connection. |
| 20 | SENSENC | input | Channel-C sense pin for the negative voltage output load connection. |
| 21 | SENSEND | input | Channel-D sense pin for the negative voltage output load connection. |
| 22 | SENSEPD | input | Channel-D sense pin for the positive voltage output load connection. |
| 23 | CCOMPD | input | Channel-D external compensation capacitor connection; adding a capacitor improves output buffer stability with high capacitive loads at OUTD by reducing amplifier bandwidth at the expense of increased settling time. |
| 24 | OUTD | output | Channel-D analog output voltage. |
| 25 | REFGND | power_in | Ground reference point for the internal reference. |
| 26 | REFIO | bidirectional | Reference input when operating with an external reference, or reference output when using the internal reference; connect a 150-nF capacitor to ground. |
| 27 | AVSS | power_in | Output buffers negative supply voltage. |
| 28 | AVDD | power_in | Output buffers positive supply voltage. |
| 29 | AGND | power_in | Analog ground reference point. |
| 30 | DVDD | power_in | Digital and analog supply voltage. |
| 31 | FAULT | output | Open-drain fault-condition output that requires an external 10-kΩ pullup resistor to a voltage no higher than IOVDD. |
| 32 | RST | input | Active-low reset input; logic low causes the device to issue a power-on-reset event. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | Global Sourcing Parts |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage DVDD to GND | DVDD | -0.3 | | 6 | V | | 5 |
| Supply voltage IOVDD to GND | IOVDD | -0.3 | | 6 | V | | 5 |
| Supply voltage AVDD to GND | AVDD | -0.3 | | 44 | V | | 5 |
| Supply voltage AVSS to GND | AVSS | -22 | | 0.3 | V | | 5 |
| Supply voltage AVDD to AVSS | | -0.3 | | 44 | V | | 5 |
| FAULT pin voltage to GND | FAULT | -0.3 | | 6 | V | | 5 |
| Input current into any digital pin | | -10 | | 10 | mA | | 5 |
| Junction temperature | TJ | -40 | | 150 | °C | | 5 |
| Storage temperature | Tstg | -60 | | 150 | °C | | 5 |
| Supply voltage DVDD to GND | DVDD | 4.5 | | 5.5 | V | | 6 |
| Supply voltage IOVDD to GND | IOVDD | 1.7 | | 5.5 | V | | 6 |
| Supply voltage AVDD to GND | AVDD | 4.5 | | 41.5 | V | | 6 |
| Supply voltage AVSS to GND | AVSS | -21.5 | | 0 | V | | 6 |
| Supply voltage AVDD to AVSS | | 4.5 | | 43 | V | | 6 |
| Pin voltage VSENSENX to GND | VSENSENX | -12 | | 12 | V | | 6 |
| Ambient temperature | TA | -40 | | 125 | °C | | 6 |
| INL relative accuracy | INL | -1 | | 1 | LSB | DAC81404. All ranges, except 0-V to 40-V and overranges | 7 |
| INL relative accuracy | INL | -2 | | 2 | LSB | DAC81404. 0-V to 40-V range | 7 |
| Differential nonlinearity | DNL | -1 | | 1 | LSB | | 7 |
| Total unadjusted error | TUE | -0.07 | | 0.07 | %FSR | Unipolar ranges, AVSS = 0 V | 7 |
| Total unadjusted error | TUE | -0.05 | | 0.05 | %FSR | Unipolar ranges, AVSS = 0 V, 0°C ≤ TA ≤ 50° | 7 |
| Offset error | | -0.05 | | 0.05 | %FSR | Bipolar ranges, -21.5 V ≤ AVSS < 0 V | 7 |
| Offset error temperature coefficient | | -2 | | 2 | ppmFSR/°C | Bipolar ranges, -21.5 V ≤ AVSS < 0 V | 7 |
| Zero-code (negative full scale) error | | | | 0.15 | %FSR | All unipolar ranges, AVSS = 0 V | 7 |
| Zero-code (negative full scale) error | | | | 0.05 | %FSR | All bipolar ranges, -21.5 V ≤ AVSS < 0 V | 7 |
| Zero-code (negative full scale) error temperature coefficient | | -2 | | 2 | ppm of FSR/°C | All unipolar ranges, AVSS = 0 V; all bipolar ranges, -21.5 V ≤ AVSS < 0 V | 7 |
| Full-scale error | | -0.06 | | 0.06 | %FSR | | 7 |
| Full-scale error temperature coefficient | | -3 | | 3 | ppm of FSR/°C | | 7 |
| Gain error | | -0.06 | | 0.06 | %FSR | | 7 |
| Gain error temperature coefficient | | -2 | | 2 | ppm of FSR/°C | | 7 |
| Bipolar-zero (midscale) error | | -0.03 | | 0.03 | %FSR | All bipolar ranges, -21.5 V ≤ AVSS < 0 V | 7 |
| Bipolar-zero (midscale) error temperature coefficient | | -2 | | 2 | ppm of FSR/°C | All bipolar ranges, -21.5 V ≤ AVSS < 0 V | 7 |
| Output voltage drift over time | | -6 | | 6 | ppm FSR | TA = 40°C, DAC code = full scale, 1000 hours | 7 |
| Output voltage headroom and footroom to AVSS and AVDD | | 1.25 | | | V | −10 mA ≤ load current ≤ 10 mA | 8 |
| Output voltage headroom and footroom to AVSS and AVDD | | 1.5 | | | V | 5.5 V < AVDD ≤ 41.5 V, −15 mA ≤ load current ≤ 15 mA | 8 |
| Capacitive load | CL | 0 | | 2 | nF | RLOAD = open, CCOMPX pin left floating | 8 |
| Capacitive load | CL | | | 1 | µF | RLOAD = open, CCOMPX = 500 pF ± 10% to VOUTX | 8 |
| Load current | | | | 15 | mA | 5.5 V < AVDD ≤ 41.5 V | 8 |
| Load current | | | | 10 | mA | 4.5 V ≤ AVDD ≤ 5.5 V | 8 |
| Input current | | -2 | | 2 | µA | Digital inputs | 11 |
| SDO low-level output voltage | VOL | | | 0.4 | V | SDO load current = 0.2 mA | 11 |
| FAULT low-level output voltage | | | | 0.4 | V | FAULT load current = 10 mA | 11 |
| Reference input voltage | VREFIO | 2.49 | 2.5 | 2.51 | V | | 11 |
| Reference input current | | | | 50 | µA | | 11 |
| Internal reference output voltage | | 2.4975 | | 2.5025 | V | TA = 25°C | 11 |
| Internal reference output drift | | | 5 | 10 | ppm/°C | | 11 |
| AVDD supply current | AIDD | | | 8 | mA | Normal mode, internal reference | 12 |
| AVDD supply current | AIDD | | | 7 | mA | Normal mode, external reference | 12 |
| AVDD supply current, power-down | AIDD | | | 10 | µA | Power-down mode | 12 |
| DVDD supply current | DIDD | | | 8 | mA | Digital interface static | 12 |
| Junction-to-ambient thermal resistance | RθJA | | 29.3 | | ℃/W | | 6 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 17 | | ℃/W | | 6 |
| Junction-to-board thermal resistance | RθJB | | 9.5 | | ℃/W | | 6 |
| Junction-to-top characterization parameter | ΨJT | | 0.2 | | ℃/W | | 6 |
| Junction-to-board characterization parameter | ΨJB | | 9.5 | | ℃/W | | 6 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 1.1 | | ℃/W | | 6 |
## CAD (KiCad official)
- Symbol: `DAC81404RHBT`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files: `dac81404rhbt-etched.step` / `dac81404rhbt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `dac81404rhbt.step` / `dac81404rhbt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/dac81404.pdf) (53 pp, sha256 `68fb0f5dcdc3272c`, retrieved 2026-11-16, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/dac81404rhbt-datasheet.pdf)